April 21, 2017, 02:19 PM | #1 |
Senior Member
Join Date: April 24, 2006
Posts: 1,900
|
One of my projects...
Bought this Stevens at a police auction in 1987 for $11.50. Someone had drilled a hole through the breech block and sunk a big machine screw through rendering it inoperable. Probably some clown making it into a toy gun for his grandson. Sights were missing. Wood was horrible. No finish left. Really, at $11.50 I probably overpaid.
Spent 10 years searching for a replacement breech block. Finally one day at a gun show I saw a used parts dealer set up on 12 tables. All filled with ammo cans full of small gun parts. I asked out of habit if he had a Model 14&1/2 breech block expecting the usual "Nope." Instead he rolled his eyes skyward for a moment, deep in thought. Then he turned and dipped into one of the ammo cans and came up with the needed part. I was flabbergasted. "How much?" I asked "Five bucks." he said. I have never pulled my wallet out so fast in my life. Now that I had the missing part I started working on the little rifle. I stripped the corrosion off the metal and used cold blue. I think it turned out OK. I stripped the wood and refinished it. Again, results were OK. Bought a rear sight for $4 from Numrich and used a file to enlarge the dovetail so it fit. I made a new front blade from a nickel I hammered flat and trimmed to fit. The take down screw is from an old camera tripod that worked perfectly in the rifle. Total monetary investment is about $22. Oh, it shoots just fine. At least it shoots...and I think that's fine. |
April 21, 2017, 02:37 PM | #2 |
Senior Member
Join Date: April 14, 2013
Location: Milwaukee, Wisconsin
Posts: 2,693
|
Any pictures of the hole drilled in it?
Looks like it works good now. |
April 22, 2017, 07:50 AM | #3 |
Senior Member
Join Date: April 24, 2006
Posts: 1,900
|
No before photos and I tossed the ruined part. It was drilled through firing pin hole greatly enlarging it and a big machine screw was sunk through it and ground off flush with breech face.
|
April 22, 2017, 09:15 AM | #4 |
Senior Member
Join Date: September 28, 2008
Posts: 10,442
|
Good job.
It's always been fun to resurrect a lost cause.
__________________
Walt Kelly, alias Pogo, sez: “Don't take life so serious, son, it ain't nohow permanent.” |
April 23, 2017, 09:11 AM | #5 |
Senior Member
Join Date: September 6, 2011
Location: Kansas
Posts: 319
|
Good job! I like seeing old or abused firearms brought back.
|
April 23, 2017, 09:38 AM | #6 |
Senior Member
Join Date: August 27, 2013
Location: Wyoming
Posts: 329
|
You did an excellent job bringing back the dead to shooting condition. Well Done! I have a Winchester 1890 in .22 Long that I plan to do this summer. It's a rough example, I plan to do the metal work & blueing and replace the wood with repro stuff, but first it needs a liner installed...the bore is badly pitted.
|
April 24, 2017, 06:56 PM | #7 |
Senior Member
Join Date: April 24, 2006
Posts: 1,900
|
Found a clearer photo.
|
April 26, 2017, 10:48 PM | #8 |
Senior Member
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,312
|
very nice
An acquaintance bought two of those that had been fire damaged. He mixed and matched parts, and ended up with one pretty neat rifle that shoots OK.
Well done Pig. |
April 27, 2017, 06:55 PM | #9 |
Senior Member
Join Date: February 9, 2005
Location: Owego, NY
Posts: 2,000
|
Your patience was justly rewarded. Great job.
__________________
,,, stupidity comes to some people very easily. 8/22/2017 my wife in a discussion about Liberals. Are you ready for civil war? |
April 28, 2017, 09:17 PM | #10 |
Senior Member
Join Date: February 15, 2007
Posts: 1,215
|
That'll do pig, that'll do.
__________________
To a much greater extent than most mechanical devices, firearms are terribly unforgiving of any overconfidence, complacency or negligence. |
|
|