June 18, 2009, 01:14 AM | #1 |
Senior Member
Join Date: January 27, 2009
Location: Richmond,Va
Posts: 292
|
Need reloading advice
Lee reloading manual says that 2.3 gr of Win 231 will send a 98 grain lrn 32 S&W long out of the barrel at 737fps. All I can get of the same load is 573fps. Why is my load so far below? (164fps) Good grief.
|
June 18, 2009, 01:23 AM | #2 |
Junior member
Join Date: January 26, 2009
Location: San Angelo, Tx
Posts: 275
|
Barrel length is one factor. Another is bullet crimp or lack there of.
|
June 18, 2009, 11:47 AM | #3 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,061
|
Yep. You need the same barrel length the orginal load was developed in or your velocity will be different. It'll be somewhat different anyway just because of dimensional differences in your chamber and theirs and in your barrel and other parts of the gun mechanism verses theirs. Also, make sure you didn't get a cast and a jacketed bullet load confused? Their not interchangeable as far as ballistics go.
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
|
|