1917 Mauser

CJP · December 11, 2011, 07:46 AM

I have a 1917 Carl Gustafs Stads Mauser in org condition and all serial numbers match.
It's missing: cleaning rod, bayonet, sling and the plate mounted on the stock(it has the brass disk). The rear adjustable site is bent and the site will not slide. My questions are: Where can I find these parts? What's the value? Should I replace the rear site?

emcon5 · December 11, 2011, 01:03 PM

Samco has most of what you want/need: https://www.samcoglobal.com/acc-swed-mauser.html

You might try Springfield sporters for the other parts.

http://ssporters.com

By "the plate mounted on the stock" you mean the butt plate? If so, check this:
http://www.gunbroker.com/Auction/Vie...Item=260993096

There are a couple of options for an aperture rear sight that fits the original base, my be a option if you can't find an original replacement.

You probably know this, but what you are looking for is Mauser 96 parts.

CJP · December 11, 2011, 02:06 PM

Thanks for the info! The plate I spoke of is not the butt plate. It's a plate mounted on the side of the stock beside the brass disc. Has info on using diffent ammo. Was a sticker on later models from what I've read.

December 11, 2011, 07:46 AM	#1
CJP Junior Member Join Date: December 10, 2011 Posts: 2	1917 Mauser I have a 1917 Carl Gustafs Stads Mauser in org condition and all serial numbers match. It's missing: cleaning rod, bayonet, sling and the plate mounted on the stock(it has the brass disk). The rear adjustable site is bent and the site will not slide. My questions are: Where can I find these parts? What's the value? Should I replace the rear site?

December 11, 2011, 01:03 PM	#2
emcon5 Senior Member Join Date: July 10, 1999 Location: High Desert NV Posts: 2,850	Samco has most of what you want/need: https://www.samcoglobal.com/acc-swed-mauser.html You might try Springfield sporters for the other parts. http://ssporters.com By "the plate mounted on the stock" you mean the butt plate? If so, check this: http://www.gunbroker.com/Auction/Vie...Item=260993096 There are a couple of options for an aperture rear sight that fits the original base, my be a option if you can't find an original replacement. You probably know this, but what you are looking for is Mauser 96 parts.

December 11, 2011, 02:06 PM	#3
CJP Junior Member Join Date: December 10, 2011 Posts: 2	Thanks for the info! The plate I spoke of is not the butt plate. It's a plate mounted on the side of the stock beside the brass disc. Has info on using diffent ammo. Was a sticker on later models from what I've read.