The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Semi-automatic Forum

Reply
 
Thread Tools Search this Thread
Old November 19, 2022, 11:08 AM   #1
DAKA
Member
 
Join Date: May 5, 2011
Location: S FL
Posts: 59
S & W 2213

I just picked up a really nice 2213 It was just there and followed me home!
Unfortunately only one mag and no box but the price was right..
I've been reading that it can take a suppressor, how does that work?
DAKA is offline  
Old November 20, 2022, 01:27 PM   #2
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,441
The barrel is threaded. If you look at the muzzle you will see a nut on it.

Jim
laytonj1 is offline  
Old November 21, 2022, 12:11 AM   #3
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,683
You may already know this but I'll post it anyway. The 2213 and 2214 came with a stubby 8-round magazine. Those magazines were only ever made for these two models and these models only last somewhere around a decade. These magazines are absolutely scarce and they sell for high prices on the secondary market.

The good news is that Model 41 magazines (and 422/622/2206 magazines) also fit and these are far more plentiful. Most of these are 10-round capacity, although they were offered for about three years with a redesigned follower that upped the capacity to 12 rounds.

These magazines are more affordable and work fine in the 2213/2214, they just aren't flush with the bottom of the compact grip on these smaller pistols.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old November 21, 2022, 01:13 PM   #4
Metric
Senior Member
 
Join Date: December 4, 2016
Posts: 305
Ah yes, the 2213 -- it generates such conflicting thoughts, for me. It has some features that are simply brilliant for a 22 that size, and some that almost ruin the whole experience, for me.

The excellent:

The size is great -- small enough to allow for pocket carry, but large enough for practical shooting and handling. The clever design of the action also means that it is pleasantly thin.

In shrinking it down from the 622, the action was not compromized or re-designed. Exact same action as the full-size target version, which was simply designed in a really size-efficient way.

For that reason, it's going to be able to stand up to a ridiculous amount of shooting. The use of aluminum and steel is really perfect -- the steel slide runs on a solid steel assembly that includes the barrel. The aluminum frame simply holds the steel in place.

The trigger is also like a full-size target gun -- excellent. And it has the best factory sights I've ever seen on a 22 of this size.

The reliability is also first-rate. And so is the mechanical accuracy. The fact that you can pop in a 12-round mag is also a beautiful feature (though expect to pay a lot for these). And it's an ideal setup for a suppressor.

The stainless steel is great, along with overall fit/finish. It doesn't feel like a re-branded Umarex -- it was made by a serious gun company to be true to its own design philosophy from the beginning.

BUT BUT BUT

The irritating:

The most basic field strip requires use of a special-purpose plastic tool, separate from the gun. If it gets lost, a spent .22 shell can be improvized -- hopefully it won't damage the anodized aluminum finish, as it will be under the full tension of the recoil spring, while pressed against the frame. But WHY? It feels like someone just got lazy in the design room, skipped the final step, and said "f*** it, just include a plastic take-down tool in the box."

The long distance between barrel axis and sights induces parallax. No big deal if you're target shooting at 20 yards. But for me, one of the most practical uses of the gun involves being able to dispatch rattlesnakes. This typically involves a head shot at ~10 feet. Rattlesnake heads are not a large target. The amount of parallax inherent to this design can convert an easy, perfect hit to a miss, at that range. I practiced on spent shotgun shells at close range, aiming for the brass section -- it's surprisingly easy to over or under-correct, depending on the exact distance to the target. Of course you can do it with enough practice, but "learning to correct for major parallax" is not high on the list of things I want to be doing with my shooting time.

The grip angle is unusual, meaning the gun does not point naturally, for me. It feels like someone deleted the backstrap. When the gun is properly aiming at the target, it feels like there is a gap between my hand and a section of the grip.

The gun is not dryfire-friendly. The firing pin is notoriously easy to break. Get a spare, while you still can. And get some snap caps. Is there an excuse for this, in a quality 1990's-vintage pistol made for high-volume shooting?

All of these issues are just shy of being complete deal-breakers, but serious enough to add some real friction to the relationship.
Metric is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:28 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.03251 seconds with 10 queries