January 3, 2013, 03:27 PM | #1 |
Junior Member
Join Date: January 3, 2013
Posts: 1
|
RMR124gr 9mm prn load data needed
I just got my Lee classic press kit for Christmas and need some help with loading data. I have Winchester wsp small primers, Win 231 and Accurate #2 powders. The Accurate website data shows 3.8 grains of #2 for BRY and RAN 124 Plated RN bullets. How do I know what the start load is for my RMR bullets since they are not specifically listed?
It looks like the start load for my W231 would be 3.9. Is this right? Thanks for helping, Billy Last edited by RCACF Billy; January 4, 2013 at 12:26 PM. Reason: No answers |
January 4, 2013, 02:22 PM | #2 |
Senior Member
Join Date: January 21, 2007
Posts: 436
|
My reloading manual list's 4.5 of 231 as the start point for 124 grain. Winchester has a reloading site that should give you current data. Yes, data will be the same for all brands of jacketed bullets. Lead is usually listed a little down on charges, not always, but usually.
Ralph |
January 4, 2013, 08:27 PM | #3 |
Senior Member
Join Date: May 3, 2009
Location: Central Texas
Posts: 3,930
|
I start plated at the starting load listed for jacketed bullets. Then work up. Never have gotten up to max load before I found a load that shot to point of aim well enough I decided that was good enough for me.
__________________
No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you. |
Thread Tools | Search this Thread |
|
|