Stocks That Fit Hi-Standard Flite King

deleteall · June 18, 2009, 06:03 PM

Anyone know of a stock, other than one by Hi-Standard, that will fit the Flight King? Or, a stock that can be adapted relatively easily? Thanks!

earlthegoat2 · June 19, 2009, 12:38 PM

Werent the High Standarg Flite Kings the ones that became the Mossberg 500. They are not exact but the general action is the same.

Slopemeno · June 19, 2009, 04:07 PM

No- the two aren't related.

You *might* find an aftermarket stock for your Hi-Standard, but my guess would be a pistol grip is the only ones out there. If I were you I'd put a recoil pad on the existing wood stack and call it a day.

BlackJack · June 19, 2009, 04:22 PM

Great idea, except HS stocks are impossible to find or available for crazy money. Moss & Rem are a dime a dozen so it woudl be great to learn than either would be work or could be modified easily.

Slopemeno · June 19, 2009, 10:31 PM

Have you tried Numrich/Gun Parts Corp?

wnycollector · June 20, 2009, 05:37 AM

Here is the link for a cross reference guide between store brands (sears, JC Penny, Kmart etc) and the real makers. Sometimes you can find a stock cheap because it's a sears...but it may fit a flite king!

http://www.e-gunparts.com/crossref.asp

Also Sears model 20, JC Higgins model 20 and JC Penney Model 4011's are ALL High Standards!

Dfariswheel · June 20, 2009, 06:42 PM

Among others, Bob's carry HS stocks, both original and replica:

http://www.gun-parts.com/histandard/

As to fitting other brands, that depends on how close the design is and on how much use of epoxy is acceptable.
If you're willing to basically rebuild and refit a stock, you can make something up that will work.

June 18, 2009, 06:03 PM	#1
deleteall Junior Member Join Date: December 26, 2008 Posts: 12	Stocks That Fit Hi-Standard Flite King Anyone know of a stock, other than one by Hi-Standard, that will fit the Flight King? Or, a stock that can be adapted relatively easily? Thanks!

June 19, 2009, 04:22 PM	#4
BlackJack Senior Member Join Date: November 16, 1999 Location: FL Posts: 168	Great idea, except HS stocks are impossible to find or available for crazy money. Moss & Rem are a dime a dozen so it woudl be great to learn than either would be work or could be modified easily. __________________ www.shootsharp.blogspot.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

June 19, 2009, 12:38 PM	#2
earlthegoat2 Senior Member Join Date: March 20, 2009 Location: Lowcountry Posts: 373	Werent the High Standarg Flite Kings the ones that became the Mossberg 500. They are not exact but the general action is the same.

June 19, 2009, 04:07 PM	#3
Slopemeno Senior Member Join Date: January 19, 2007 Posts: 2,663	No- the two aren't related. You might find an aftermarket stock for your Hi-Standard, but my guess would be a pistol grip is the only ones out there. If I were you I'd put a recoil pad on the existing wood stack and call it a day.

June 19, 2009, 10:31 PM	#5
Slopemeno Senior Member Join Date: January 19, 2007 Posts: 2,663	Have you tried Numrich/Gun Parts Corp?

June 20, 2009, 05:37 AM	#6
wnycollector Senior Member Join Date: April 22, 2007 Posts: 1,996	Here is the link for a cross reference guide between store brands (sears, JC Penny, Kmart etc) and the real makers. Sometimes you can find a stock cheap because it's a sears...but it may fit a flite king! http://www.e-gunparts.com/crossref.asp Also Sears model 20, JC Higgins model 20 and JC Penney Model 4011's are ALL High Standards!

June 20, 2009, 06:42 PM	#7
Dfariswheel Senior Member Join Date: May 4, 2001 Posts: 7,478	Among others, Bob's carry HS stocks, both original and replica: http://www.gun-parts.com/histandard/ As to fitting other brands, that depends on how close the design is and on how much use of epoxy is acceptable. If you're willing to basically rebuild and refit a stock, you can make something up that will work.