May 7, 2009, 11:48 AM | #51 |
Senior Member
Join Date: April 20, 2009
Location: Helena, AL
Posts: 4,415
|
My first centerfire was a 4" Model 19, circa 1970. It did great on factory stuff, except the old SuperVel and any max manual loads of the day. Sold it and got a Model 27.
|
May 7, 2009, 09:50 PM | #52 |
Junior Member
Join Date: March 14, 2009
Location: Aptos, CA
Posts: 1
|
My 19-4 6" p&r with Spegel grips. The spegels are actually a bit small for a 6" barrel so I went back to some Hogue targets when I shoot it.
|
May 8, 2009, 09:38 AM | #53 |
Senior Member
Join Date: February 22, 2009
Location: Mid-Michigan
Posts: 313
|
Model 19's FTW!
19-3 with Houge Kingwood grips
__________________
"To fight and conquer in all your battles is not supreme excellence, supreme excellence consists in breaking the enemy's resistance without having to fight" -Sun Tzu |
May 8, 2009, 01:33 PM | #54 |
Senior Member
Join Date: February 12, 2005
Location: North central Ohio
Posts: 7,486
|
4INCHSMITH: Nice looking Model 19 and a great photo!
__________________
ONLY AN ARMED PEOPLE CAN BE TRULY FREE ; ONLY AN UNARMED PEOPLE CAN EVER BE ENSLAVED ...Aristotle NRA Benefactor Life Member |
May 8, 2009, 02:06 PM | #55 |
Senior Member
Join Date: February 22, 2009
Location: Mid-Michigan
Posts: 313
|
Thank you! My 21st birthday present to myself, and it still is my favorite shooter.
__________________
"To fight and conquer in all your battles is not supreme excellence, supreme excellence consists in breaking the enemy's resistance without having to fight" -Sun Tzu |
May 8, 2009, 04:47 PM | #56 |
Member
Join Date: April 30, 2009
Location: Greenfield, WI. USA
Posts: 39
|
I hope to get better pictures as soon as I get my camera back from my daughter I noticed that some of the early 19's had the stainless trigger and hammer, mine being a 19-5 has them blued, I tend to like the stainless better. I also saw an early one that had the stainless adjustable sights and ramp.
|
May 8, 2009, 05:45 PM | #57 |
Senior Member
Join Date: July 20, 2005
Location: Indiana
Posts: 10,435
|
Model 19's did not come with stainless triggers, hammers, or sights, some model 66's did. You are probably mistaking polished stainless M66's for nickel M19's.
|
May 8, 2009, 05:49 PM | #58 | |
Senior Member
Join Date: February 12, 2005
Location: North central Ohio
Posts: 7,486
|
Quote:
__________________
ONLY AN ARMED PEOPLE CAN BE TRULY FREE ; ONLY AN UNARMED PEOPLE CAN EVER BE ENSLAVED ...Aristotle NRA Benefactor Life Member |
|
May 8, 2009, 06:01 PM | #59 |
Member
Join Date: April 30, 2009
Location: Greenfield, WI. USA
Posts: 39
|
I saw it on one of the online auctions. I know for sure about the ramp being stainless and I am almost certain the sights were as well. I am searching for the pictures. The thing is, it may have been another model S&W as I have researched so many lately.....Sucks to get old
|
May 8, 2009, 06:05 PM | #60 | ||
Senior Member
Join Date: February 12, 2005
Location: North central Ohio
Posts: 7,486
|
Quote:
__________________
ONLY AN ARMED PEOPLE CAN BE TRULY FREE ; ONLY AN UNARMED PEOPLE CAN EVER BE ENSLAVED ...Aristotle NRA Benefactor Life Member |
||
May 8, 2009, 06:16 PM | #61 |
Member
Join Date: April 30, 2009
Location: Greenfield, WI. USA
Posts: 39
|
Your correct, it was a model 66. I was looking at one of them at the time I bought mine.
|
May 8, 2009, 08:34 PM | #62 | |
Senior Member
Join Date: July 20, 2005
Location: Indiana
Posts: 10,435
|
Quote:
|
|
May 10, 2009, 09:54 PM | #63 | |
Senior Member
Join Date: December 30, 2008
Location: WV
Posts: 271
|
hblac
Quote:
The underlug on the Python gives you a nice nose heavy feel the 19 lacks, but they both shoot very well. Because of the 4" barrel I use the Python more, but I like the 19 very much too. I also think the Python has a little better trigger. I would not replace a 19 I liked with a Python, but if you like the 19, you would probably like the Python a lot if you could get it for even a semi-reasonable price. Most of the really high Python prices seem to be for collector-type weapons, you might be able to get a fairer deal on a used "shooter".
__________________
Paul |
|
May 13, 2009, 07:49 PM | #64 |
Junior member
Join Date: April 1, 2009
Location: kentucky
Posts: 154
|
model 19
pinned pin and recess cylinder was last in mid eightes,i bought one in 82 new best 357 there is...i paid 209 in 82..
|
May 16, 2009, 06:16 PM | #65 |
Member
Join Date: April 23, 2009
Location: North Carolina
Posts: 76
|
pmeisel,
Thanks for your reply. Actually, before spending that kind of money on a Python I can get a Sig 226 with Tritium night sights for a lot less and have a lot more firepower for CCW in the truck and as a shooter at the range. Makes more sense to me. Hal |
May 16, 2009, 09:01 PM | #66 |
Senior Member
Join Date: December 22, 2007
Location: Florida
Posts: 1,222
|
Model 19:
I own two of them (4" and 6" barrels). As I have always stated on this site, these are the finest Smith revolvers (for the money) that you can buy. They are extremely well made and accurate. Of course, they are very reliable and I just love that you can shoot .38 special and .357 mag ammo out of the same pistol. Consider yourself fortunate to own a model 19.
|
August 2, 2009, 06:14 AM | #67 |
Junior Member
Join Date: August 2, 2009
Posts: 3
|
Hi,
I was wondering if anyone could tell me the approximate date of manufacture on a model 19-3 I just picked up in a trade for a PPK? Gun is a blued 2.5" with absolutely zero wear at all!!! pinned and recessed looks amazing. PPK that was traded away also pictured(1994 Interarms). I think I made the right choice serial number is 8k813xx thanks Last edited by siscolee; August 2, 2009 at 02:54 PM. |
August 2, 2009, 07:35 AM | #68 |
Senior Member
Join Date: May 6, 2005
Location: North Chesterfield, Virginia
Posts: 4,766
|
Might as well put mine up here too. It's a 19-4, made in, IIRC, 1974. I've only fired it a few times.
__________________
For God so loved the world, that He gave His only begotten Son, that whoever believes in Him should not perish, but have everlasting life. John 3:16 (NKJV) |
August 2, 2009, 09:17 AM | #69 |
Senior Member
Join Date: June 18, 2009
Location: NorthWest USA
Posts: 1,996
|
My 19-3 has a SN starting with 7k and was made in 1975 so a pinned and recessed 8k should be a few years after that. If no one gives you a good date in this thread there is another thread about dating a Smith.
|
August 2, 2009, 02:49 PM | #70 |
Junior Member
Join Date: August 2, 2009
Posts: 3
|
found out on another forum my 19-3 shipped in 1975 as well
|
August 10, 2009, 12:26 PM | #71 |
Member
Join Date: July 19, 2009
Posts: 88
|
http://www.auctionarms.com/Closed/Di...mNum=9211153.0
This is my first M19. A real dog. Its actually much worse than the photos reveal. The front site is jammed into a cut in the barrel and about .250" from the end. The action has a tinney sound when the hammer is dropped. Dont know why but I have an attraction for junkers. On the side of the frame is O C S D 9 . The forcing cone looks ok so I decided to keep the gun and send it back to Smith. I asked them make it look new and try and preserve the lettering. Its funny how I seem to discover the good things in life late. I have been Shooting Smith revolvers since the 70s. Mostly long barrel ones. I recently decided to start shooting them because I had gotten tired of picking up brass all over the place at the range. I know this sounds like a lazy man. Shooting is supposed fun. Chasing brass aint. I shoot revolvers a lot straiter than autos. That 4" M19 is gonna make ME look good |
August 10, 2009, 05:30 PM | #72 | |
Staff
Join Date: September 27, 2008
Location: Foothills of the Appalachians
Posts: 13,057
|
Quote:
Monetarily, it reduces the value of the gun. From any other standpoint, it's still a marvelously effective and versatile firearm. It was more than a fair trade for the PPK. Enjoy! I left my copy of the SCSW at work, but someone will be along soon to give you her birthdate.
__________________
Sometimes it’s nice not to destroy the world for a change. --Randall Munroe |
|
August 10, 2009, 05:37 PM | #73 |
Member in memoriam
Join Date: August 13, 1999
Location: In The HOT, Humid, and Mu
Posts: 6,116
|
FWIW, the original grips if in pristine shape are worth between $75 and
$100 by themselves; depending on who has 'em~! |
August 10, 2009, 05:45 PM | #74 |
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
A model 19-3 ( 19-3 was produced from 1967 - 1976 ) - and the serial number you gave 8K813XX shows 1975 in my S&W book.
I've been picking up S&W revolvers lately when I find them - and in the last year or so, I've picked up a pair of model 19-3's both 4", both nickel finish - nice guns ( one was unfired, in its original box, with the original receipt taped to the box lid ... very cool find I thought for $ 475 ). I'm going to keep one / pass the other one on to one of the kids for a Xmas present probably... |
August 10, 2009, 06:39 PM | #75 |
Senior Member
Join Date: June 18, 2009
Location: NorthWest USA
Posts: 1,996
|
BigJimP, could you check the date of my Model 19-3 SN, too? - 7K691xx Thanks!
Bought it new in the spring/summer of '76 so maybe it's a '75. I'll attach a picture: (with the Hogue 10000 cobblestone grips but I have the original wood stocks too.) |
Thread Tools | Search this Thread |
|
|