The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools Search this Thread
Old March 17, 2009, 08:07 PM   #1
devilchild
Junior Member
 
Join Date: March 17, 2009
Location: Pacific Northwest
Posts: 4
I have a Winchester 1892 32.30 im trying to get an idea what its worth

As the subject line says: Winchester model 1892 32.30 serial# 437533. This rifle is in fantastic condition for being 102 years old. There is a small amount of rust spots(and I do mean very little). The stock still has it's original finish with normal wear(at least to me). No damage what so ever. I have fired aprrox. 25 rounds through it since I inherited it from my father when he passed away in 2006. he last time I fired it was in October 2006. Otherwise its been cleaned, oiled and stored in a hardshell rifle carrier in a cool dry place.
The patina is awesome!!
If anyone has a vague idea what it could be worth, please reply. I can supply pictures if you like. Although, I feel pictures do not do justice to this rifle.
My father would never tell me where(he lived in central Ohio) and how much he purchased it for, but he knew it was worth way more than what he paid for it.
I recently visited a Cabelas Store in my area and seen a similar rifle in way worse condition that blew me away in its price.
I also have other firearms in my collection(also from my father) that vary in condition. For the most part, I know they of commercial variety with only 2 other being an exception(an Ithaca Firearms double barrel side by side 16ga w/a broken stock and a JC Higgins 12ga pump).
Once again, if anyone has any vague ideas, let me know.
Thank you to everyone!!
devilchild is offline  
Old March 17, 2009, 09:31 PM   #2
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
Congratulations on the Winchester 1892. They are very nice rifles, and there is quite a bit of collector interest in them. If the rifle says "Model 1892" on the tang, it is pre-1920s production. If it says nothing on the tang, and instead says "Winchester Model 92" on the barrel, it is post-1920s production. With a serial number above 400,000, I believe it is post-WW1 production, but I could be wrong. The Winchester Model 92 was produced until 1963.

Since a lot of things go into determining the value of the rifle, have it appraised by an appraiser for an accurate value, but current value of your rifle would be between $1,000 and $2,500 if it is a typical carbine (depending on condition), up to $5,000+ if it is a Deluxe Rifle with a factory tang sight.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Scorch is offline  
Old March 18, 2009, 04:33 AM   #3
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
Your Winchester was made in 1907.
Hawg is offline  
Old March 18, 2009, 08:10 AM   #4
devilchild
Junior Member
 
Join Date: March 17, 2009
Location: Pacific Northwest
Posts: 4
It has model 1892 on the tang. I also found the year of manufacture as well. Overall, it's a very nice rifle. Thank you for your insight.
devilchild is offline  
Old March 18, 2009, 11:34 AM   #5
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,678
[model 1892 32.30 ]

That would be chambered for the .32-20 Winchester,
or .32-20 WCF, samo-samo - since the M92 is has short action, suitable for pistol-type cartridges.

There was never any such .32-30 cartridge. You might be confusing with the longer, rifle-type cartridges chambered in the Winchester 1894, like the .30-30, .32-40, and/ot the .32 Special (besides several other calibers/cartridges).

.
PetahW is offline  
Old March 19, 2009, 10:44 AM   #6
TEDDY
Junior member
 
Join Date: December 10, 2006
Location: MANNING SC
Posts: 837
32/20

some people have called that cartridge 32/30 and I dont know why but I have seen it in print.As that was the first cartridge I loaded with awin tool and mold I am very familia with the name.I had a 73 win and I still have the tong tool and mold.
TEDDY is offline  
Old March 19, 2009, 09:18 PM   #7
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
Hi, devilchild,

You used the word "patina". Perhaps you meant the original blue finish, but patina, in the antique trade, is the brownish combination of rust, grease, old sweat, and plain dirt that accumulates on old tools and other metal objects, including guns. A gun with patina is not worthless, but it is worth a lot less than a gun with the original blue/black finish as it came from the factory, which is what you seem to describe.

Hi, Teddy and PetahW,

There was a .32-30 Remington, similar to the .32-20, but larger all around. Also, I have heard the .32 Winchester Special called the .32-30 because of its closeness to the .30-30. But neither of those rounds was ever chambered in the Winchester Models 1873 or 1892.

Jim

Last edited by James K; March 19, 2009 at 09:26 PM.
James K is offline  
Old March 20, 2009, 03:00 AM   #8
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,678
Well, there was also a .31-30 Winchester experimental cartridge too, IIRC.
That also wasn't available in an 1892.

I was just referring to the commonly accepted nonclamature for the chambering of the OP's rifle.

In any event, the top of the OP's rifle's barrel should have the correct designation, of either ".32WCF" or ".32-20", and not ".32.30" - if it does, I (for one) would like to see a pic of the caliber stamp.

.
PetahW is offline  
Old March 20, 2009, 06:45 AM   #9
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
My Winchester 92 made in 1907 is marked 32 WCF.
Hawg is offline  
Old March 20, 2009, 07:20 AM   #10
devilchild
Junior Member
 
Join Date: March 17, 2009
Location: Pacific Northwest
Posts: 4
I post a few pictures on Saturday. As for the "Patina" reference, I just used that to descripe it's age. Not that it is "dirty,sweaty,oily, or rusty". It is NOT. As a matter of fact, the blueing is all original.
Off the top of my head, I think its stamped .32-20 thats what I originally meant to say it was. Regardless, I will post the few pics and you all can decide for yourself.
Anyhow, I appreciate all the feedback!!
devilchild is offline  
Old March 21, 2009, 02:18 PM   #11
devilchild
Junior Member
 
Join Date: March 17, 2009
Location: Pacific Northwest
Posts: 4






I missed the pic of the chambered cartridge. It is stamped 32 w.c.f.
Also, I had made the mistake of the i.d. I meant 32.20. I have the rifle cartridges as well. They are Remington brand .32.20.
devilchild is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.05885 seconds with 10 queries