|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
September 13, 2018, 01:24 PM | #1 |
Senior Member
Join Date: April 24, 2010
Location: Ohio
Posts: 581
|
Anyone recognize this flintlock pistol?
I picked this up at an auction. It was listed as possibly India manufacture which I knew right away to be incorrect. The lock is engraved Dublin Castle and the crown and GR are engraved also. The barrel is 58 caliber and has the proof marks shown that I haven't been able to identify. The pistol has a martial look but I can't find anything like it. I am guessing original parts used to make and restock a pistol or a reworked martial pistol.
In any case the lock is quality and throws a shower of sparks and the barrel bore is clean so it will make a great shooter in the worst case. Any help is appreciated. |
September 13, 2018, 03:47 PM | #2 |
Senior Member
Join Date: April 24, 2010
Location: Ohio
Posts: 581
|
More Info
Closer photo of the lock. I took the lock out of the mortise and it is a quality piece of work. On the inside of the mortise is stamped in block letters.
First letter may be an H then ERRERT. |
September 13, 2018, 06:01 PM | #3 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,838
|
I’m suspicious of it. Did somebody try to refresh the engraving? Does a magnet stick to the metal?
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
September 13, 2018, 06:52 PM | #4 | |
Senior Member
Join Date: April 24, 2010
Location: Ohio
Posts: 581
|
Quote:
On the far right is a London proof house view mark, in the middle is a London definitive black powder proof. The one on the left has two numbers the last being 2 but I can't make out the first. |
|
September 13, 2018, 10:13 PM | #5 |
Senior Member
Join Date: January 22, 2009
Location: Texas
Posts: 2,753
|
The freckling on the barrel and hammer finish make it look like it was plated at one time. Other than that I can be of no help.
Just curious, will the frizzen spark? The engraving looks hand cut and not stamped from a die. |
September 13, 2018, 10:50 PM | #6 |
Senior Member
Join Date: April 24, 2010
Location: Ohio
Posts: 581
|
The freckling is where the metal was pitted all the metal parts have been cleaned. Yes that is engraving not stamping and the lock throws a good shower of sparks and is very well made.
|
September 14, 2018, 05:33 AM | #7 |
Senior Member
Join Date: May 9, 2016
Posts: 270
|
It is an early 1800s british light dragoon pistol.
|
September 14, 2018, 08:45 AM | #8 |
Senior Member
Join Date: April 24, 2010
Location: Ohio
Posts: 581
|
Thanks! Any idea where I might find a picture of one similar to this one?
|
September 14, 2018, 11:00 AM | #9 |
Senior Member
Join Date: April 24, 2010
Location: Ohio
Posts: 581
|
More Info
Additional info. On closer examination to stamped letters inside the lock mortise appear to spell HERBERT. Additionally the stock inside the lock mortise, the rammer, both lock screws have the same assembly file marks //III. Likely the barrel does also but I can only see two of the marks and don't want to take metal nose cap off to see. This nose cap appears to be a mend for a broken forestock. The Lock also has assembly marks on the plate and frizzen being //II
Since Dublin Castle stopped engraving their locks in 1798 I'm wondering if this wasn't a broken pistol that was repaired to help meet the arms needs of the Brits during the Napoleonic wars just after 1800? |
September 14, 2018, 11:26 AM | #10 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,833
|
Not to burst your bubble, you may have an original, but I'm far from expert enough to tell. What I can tell you is that since about the time the British introduced firearms into that part of the world, there have been people in India, Pakistan, and other places around there who have been hand making copies of guns, visually identical to the originals, right down to copying all proof marks.
And, not just flintlocks, but all the way up to SMLE's, Lugers, and others. Many (most) are shoddy knock offs and easily spotted, but some are virtually perfect copies to the naked eye.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
September 14, 2018, 12:43 PM | #11 |
Senior Member
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 3,166
|
There's a British Militaria Forum where folks may be able to help you out with more info.: --->>> https://www.tapatalk.com/groups/brit...ssion-arms-f4/
For example, here's a 2 page thread about a similar topic from that same forum:--->>> https://www.tapatalk.com/groups/brit...st-t22651.html I did find more than a few Dublin Castle dragoons that were previously sold at auctions, but this one shows how some had slightly different patterns - i.e. the grip angle:--->>> https://www.bonhams.com/auctions/210...?category=list Your pistol may have more markings under the barrel or on the stock if the stock were old enough to be period. Every other Dublin Castle dragoon that I saw online had a brass trigger guard & grip cap except for yours. Perhaps an indication that it was rebuilt...maybe more than once? P.S. Here's an early original from IMA:--->>> https://www.ima-usa.com/products/ori...12060789211205 Last edited by arcticap; September 14, 2018 at 01:27 PM. |
September 14, 2018, 01:24 PM | #12 |
Junior member
Join Date: October 20, 2012
Posts: 5,854
|
Whatever it is its a beaut and if it gives good fire from cock and hammer I'd take the piece to the range!
|
September 14, 2018, 02:28 PM | #13 | |
Senior Member
Join Date: April 24, 2010
Location: Ohio
Posts: 581
|
Quote:
|
|
September 15, 2018, 08:17 AM | #14 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,838
|
I finally figured out what bothered me. It looks like it's been refinished and that some of the engraving was refreshed.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
September 15, 2018, 02:15 PM | #15 |
Senior Member
Join Date: April 24, 2010
Location: Ohio
Posts: 581
|
I agree with your observation Gary. The stock is lacking the expected wear, nicks and gouges. The engraving has not been refreshed but looks that way due to the surface being cleaned and debris left in the engraving.
|
September 15, 2018, 05:20 PM | #16 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,838
|
It was the lack of patina on the metal and the peculiar coloring that made reminded me of those non-working zinc replicas.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
September 16, 2018, 11:46 AM | #17 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
The lack of patina usually indicates Bubba was at the thing and ruined any collector value.
iCollector.com listed that exact model of pistol back in 2016 as a replica, probably made in India. A real Brit pistol will have inspector's stamps all over it. That doesn't mean it was though. There are all kinds of various era "DUBLIN CASTLE" pistols all over the assorted auction house sites. None of which look remotely like a Light Dragoon pistol. Those have brass fittings for the most part. The "Crown" over "G.R." and "DUBLIN CASTLE" across the tail is found on Brown Bess musket locks too.
__________________
Spelling and grammar count! |
September 16, 2018, 12:20 PM | #18 | |
Senior Member
Join Date: April 24, 2010
Location: Ohio
Posts: 581
|
Quote:
|
|
September 16, 2018, 05:57 PM | #19 |
Senior Member
Join Date: April 24, 2010
Location: Ohio
Posts: 581
|
Thanks Arcticap
Arcticap I have to thank you for the lead to the British Militaria forum. They were able to I.D. what I have. Turns out it is what they call an Afghan bring back. The barrel is original with commercial English proofs and the lock is a original Dublin Castle "extra flat" pistol lock. The lock screws and rammer are original items also but the rest is Afghan restock or re-creation in modern times.
|
|
|