April 14, 2001, 09:12 PM | #1 |
Senior Member
Join Date: October 26, 2000
Location: Maryland
Posts: 267
|
anyone have any loading info for the 410 shotshell using win 296 or a place on the net i can find loading data for the 410.
|
April 15, 2001, 12:16 PM | #2 |
Member
Join Date: February 6, 2000
Location: Inman SC
Posts: 38
|
Alliant Powder has a few loads on there web site.
http://www.alliantpowder.com/ Hodgdon also has some. http://www.hodgdon.com/data/shotshel/index.htm |
April 16, 2001, 03:01 PM | #3 |
Senior Member
Join Date: October 13, 2000
Posts: 425
|
I load allot of .410's with W296. Unfirtunatly I am in TX right now and all my loading info is in AZ so I can't be much help. I got my info from their freebee handout load book.
|
April 16, 2001, 04:01 PM | #4 |
Senior Member
Join Date: October 26, 2000
Location: Maryland
Posts: 267
|
i just called wincghester and asked for one today
|
April 16, 2001, 04:08 PM | #5 |
Senior Member
Join Date: March 2, 2001
Location: North Eastern Ohio
Posts: 185
|
From the handout
410 Bore 2 1/2" case winchester Compression-formed
Shot weight primer powder charge wad fps 1/2oz. win209 296 13.5 WAA41 1150 CCI109 296 13.5 WAA41 1150 win209 296 14.0 WAA41 1200 There is more info but all the charges are from 13.5grains to 14 grains Except for the 2 1/2" Case Remington-Peters "SP" plastic. That is the only one with a 15 gr charge. fps is 1200 and LUP is 9500. Hope this helps. I just had the handout here cause load .40 S&W with WST Joe and Marci |
April 17, 2001, 04:11 AM | #6 |
Senior Member
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 4,678
|
I am told that H110 and W296 are the made to the same canister specification by Western Powder for Hodgdon and Winchester. [It says so on a poster on the wall in WSI]
http://www.weaponssafety.com/ http://www.westernpowders.com/ SMP297 in bulk powder is close, but I cannot verify. What is humorous if this idenity is true, is the data in Speer 12 and Speer 13 show the roles of 296 and H110 reversing in allot of the calibers. They have long been suspected of dry labbing those load books. |
|
|