H&R Pardner Protector 12ga Shotgun Anybody Have One?

Sirhcmarak · February 12, 2011, 10:53 PM

I have a H&R Protector and i can't find a sight rail for it. Anyone have any info on where to look? Thanks

TheKlawMan · February 12, 2011, 11:10 PM

Do you mean a picatinny rail (which screws to the top of the receiver and to which a rear sight can be mounted)? If you wish one I believe you will have to have your receiver drilled for one.

nefprotector · February 12, 2011, 11:29 PM

IMHO. people add to much junk to their guns. Anything that fits the Remington 870 will fit your NEF Protector.

stolivar · February 14, 2011, 10:57 PM

they are already drilled and tapped

steve

Dr_Rich · February 16, 2011, 02:34 PM

If you're looking for the sight mount that goes on the gun, I believe its the weaver 429M. But if you have some where, where you can take your gun in. I would recommend doing so.

I had some bad luck with my savage. I spoke to 4 different people at gander and I finally had to bring the gun to them. And they still couldn't figure out what would fit. I finally had to look it up on my phone while the two guys working there watched in awe.

I would double check on each package, because I also found #24 and #82 for the H&R/NEF.

"JJ" · February 17, 2011, 11:09 AM

Just curious, do you have to buy a H&R choke tube or can it use one for an 870?

nefprotector · February 17, 2011, 01:57 PM

No choke tube on mine.

February 12, 2011, 10:53 PM	#1
Sirhcmarak Junior Member Join Date: January 2, 2011 Location: South Carolina Posts: 6	H&R Pardner Protector 12ga Shotgun Anybody Have One? I have a H&R Protector and i can't find a sight rail for it. Anyone have any info on where to look? Thanks __________________ ["All that is necessary for evil to triumph is for good men to do nothing." Edmund Burke] Savage 110 .270 Win, Marlin 925m .22 Win Mag, Taurus PT101P .40 S&W, H&R Pardner Protector 12 Ga, Bushmaster AR-15 .223 Rem

February 14, 2011, 10:57 PM	#4
stolivar Senior Member Join Date: September 24, 2004 Posts: 394	huh they are already drilled and tapped steve

February 17, 2011, 11:09 AM	#6
"JJ" Senior Member Join Date: March 23, 2010 Location: NE Texas Posts: 576	Just curious, do you have to buy a H&R choke tube or can it use one for an 870? __________________ ~ "JJ"

February 12, 2011, 11:10 PM	#2
TheKlawMan Junior member Join Date: June 23, 2009 Location: Orange County, CA Posts: 2,149	Do you mean a picatinny rail (which screws to the top of the receiver and to which a rear sight can be mounted)? If you wish one I believe you will have to have your receiver drilled for one.

February 12, 2011, 11:29 PM	#3
nefprotector Junior member Join Date: December 3, 2009 Location: SE Alabama Posts: 701	IMHO. people add to much junk to their guns. Anything that fits the Remington 870 will fit your NEF Protector.

February 16, 2011, 02:34 PM	#5
Dr_Rich Senior Member Join Date: February 15, 2011 Location: Gods waiting room. Posts: 103	If you're looking for the sight mount that goes on the gun, I believe its the weaver 429M. But if you have some where, where you can take your gun in. I would recommend doing so. I had some bad luck with my savage. I spoke to 4 different people at gander and I finally had to bring the gun to them. And they still couldn't figure out what would fit. I finally had to look it up on my phone while the two guys working there watched in awe. I would double check on each package, because I also found #24 and #82 for the H&R/NEF.

February 17, 2011, 01:57 PM	#7
nefprotector Junior member Join Date: December 3, 2009 Location: SE Alabama Posts: 701	No choke tube on mine.