Barrel liners

Newton24b · May 17, 2012, 08:56 PM

here is my questio, who is actually making them these days? the few i can find online are all for converting your weapon into a 22 or .17

Scorch · May 18, 2012, 11:00 AM

What are you trying to do? To reline a barrel to centerfire, there are a few people who do it. You can call John Taylor at Taylor Machine 253-445-4073. Cost is about the same as rebarreling, but many people who want the original markings left intact prefer to reline a barrel rather than rebarrel and lose the original markings.

Newton24b · May 18, 2012, 09:01 PM

well im thinking of a centerfire to center fire conversion. so far the only handgun barrels i can find are pencil barrels for smith and colt revolvers circa 1950-1960, and a few liners that turn your gun into a rim fire.

James K · May 19, 2012, 08:30 PM

The tubes usually called "liners" are thin and cannot be used with high pressure cartridges. The reason is that when reaming out the original barrel enough space must be left for the solder or whatever is used to keep the liner in place. That means the liner is smaller than the barrel, so it must be able, itself, to contain the pressure, otherwise the liner will expand in an irregular manner depending on the irregularities of the solder or epoxy.

When it is desired to "line" the barrel for use with high pressure ammunition, a standard lightweight barrel is machined down so it will fit into the original barrel. Unless the original barrel was quite thick, it becomes a thin shell. But the inner barrel (some call it an "insert", reserving the term "liner" for the low pressure kind) must be thick enough to hold the pressure. Not many gunsmiths will do that work and they usually do it with many caveats and cautions.

That kind of "insert" is usually used where the rifle is a collectors item and it is desired to keep the original barrel markings.

Jim

May 17, 2012, 08:56 PM	#1
Newton24b Junior member Join Date: February 10, 2009 Posts: 974	Barrel liners here is my questio, who is actually making them these days? the few i can find online are all for converting your weapon into a 22 or .17

May 18, 2012, 11:00 AM	#2
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,248	What are you trying to do? To reline a barrel to centerfire, there are a few people who do it. You can call John Taylor at Taylor Machine 253-445-4073. Cost is about the same as rebarreling, but many people who want the original markings left intact prefer to reline a barrel rather than rebarrel and lose the original markings. __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services

May 18, 2012, 09:01 PM	#3
Newton24b Junior member Join Date: February 10, 2009 Posts: 974	well im thinking of a centerfire to center fire conversion. so far the only handgun barrels i can find are pencil barrels for smith and colt revolvers circa 1950-1960, and a few liners that turn your gun into a rim fire.

May 19, 2012, 08:30 PM	#4
James K Member In Memoriam Join Date: March 17, 1999 Posts: 24,383	The tubes usually called "liners" are thin and cannot be used with high pressure cartridges. The reason is that when reaming out the original barrel enough space must be left for the solder or whatever is used to keep the liner in place. That means the liner is smaller than the barrel, so it must be able, itself, to contain the pressure, otherwise the liner will expand in an irregular manner depending on the irregularities of the solder or epoxy. When it is desired to "line" the barrel for use with high pressure ammunition, a standard lightweight barrel is machined down so it will fit into the original barrel. Unless the original barrel was quite thick, it becomes a thin shell. But the inner barrel (some call it an "insert", reserving the term "liner" for the low pressure kind) must be thick enough to hold the pressure. Not many gunsmiths will do that work and they usually do it with many caveats and cautions. That kind of "insert" is usually used where the rifle is a collectors item and it is desired to keep the original barrel markings. Jim