|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
December 31, 2010, 11:07 AM | #1 |
Member
Join Date: December 22, 2009
Posts: 61
|
Why no .32 ACP conversions for .31 Remmy?
I know there are .32 S&W conversion cylinders for .31 Remington. Why not a .32 ACP? I'm sure a steel frame can withstand the pressure, and the cylinder made of modern steel will as well.
A gun like that weighing 16 oz would make a perfect pocket revolver due to its small size, and weight, while utilizing a fairly potent cartridge. Any thoughts? |
December 31, 2010, 11:12 AM | #2 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,541
|
Probably because the jacketed .32 ACP bullet would be way undersize for the .31 barrel. No accuracy because the rifling wouldn't "bite", no power because of windage.
|
December 31, 2010, 11:18 AM | #3 | |
Junior member
Join Date: November 9, 2010
Location: Florida
Posts: 260
|
Quote:
|
|
December 31, 2010, 11:38 AM | #4 |
Member
Join Date: December 22, 2009
Posts: 61
|
Well, 32 ACP had been used extensively by numerous armies and police departments throughout the world. While I agree that there are better choices, it still makes a decent self-defense round.
As far as the bullet diameters, I would have to look them up. Maybe the .32 ACP is a bit undersized for the .31 barrel. |
December 31, 2010, 11:41 AM | #5 |
Junior member
Join Date: November 9, 2010
Location: Florida
Posts: 260
|
I guess your point is that .32ACP is better than a pointy stick.
|
December 31, 2010, 11:57 AM | #6 |
Senior Member
Join Date: April 14, 2008
Location: Stuart, VA
Posts: 2,473
|
You can get 32acp bullets in .312 diameter. You would probably have to load your own using .312 *lead* bullets though. Standard 32acp rounds are jacketed, and wouldn't be good for the forcing cone and barrel on the little remy, same thing for the bigger Colt and Remington reproduction revolvers (lead bullets only).
Secondary thoughts: 1) By the time you get the .31 remy, and .32acp cylinder (considering the cylinder would cost about the same as a .31 S&W conversion cylinder), you could have gotten something designed for 32acp that's better, smaller, lighter, and cheaper. 2) 32acp is semi rimless, so it has a bit of a rim. I can shoot 32acp in my revolver made for 32 S&W Long, and it will go bang, however the pressures for standard 32acp is higher than the 32 S&WL. My 32 S&WL revolver is made for higher pressures and can take the abuse, though, I rarely do it (I reload 32 S&WL anyway). I wouldn't shoot 32acp in a 32 S&W (short) gun. Not saying that the gun will explode in your hands (however it could), you will ruin the gun fairly quickly if you practice a lot with it (as you should with any self defense gun you carry).
__________________
Liberty and freedom often offends those who understand neither. Last edited by noelf2; December 31, 2010 at 12:11 PM. |
|
|