December 12, 2018, 12:09 AM | #1 |
Member
Join Date: March 15, 2008
Location: Charleston, SC
Posts: 72
|
20MOA mount needed?
Installing Trigicon on AR, but cannot get enough "down" from the scope.
I have shimmed it with about 3/64". Might need more. Will a 20MOA mount remedy this? |
December 12, 2018, 04:49 AM | #2 |
Senior Member
Join Date: June 23, 2013
Location: Central Taxylvania..
Posts: 3,609
|
Sounds like something amiss somewhere.
First off, is this while your trying to boresight it? If so your down is actually up. Aka your dialing the scope to the target, not moving the bullet hole to the scope. What distance? 25 yards, 100 yards? Scope covers more distance per click the further out you go. Barring all that, 20 MOA might get you on target, but if you need to adjust you might not be able to. I'd check to make sure your existing base is good and flat. And sits flat on your picatinny. Bo burrs or such. Make sure your picatinny is flat also. Good luck.
__________________
When our own government declares itself as "tyrannical", where does that leave us??!! "Januarary 6th insurrection". Funny, I didn't see a single piece of rope... |
Thread Tools | Search this Thread |
|
|