|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
July 12, 2018, 11:40 AM | #1 |
Senior Member
Join Date: January 10, 2011
Posts: 277
|
West German p226 questions
I have the chance to buy a very lightly used West German p226 for a good price, and I have a couple questions.
I've read the West German p226 DA triggers were 12 lbs, whereas modern sigs are 9 lbs, is this true? My (non West) German p228 had a pretty decent DA trigger pull, it didn't feel heavy to me, were those also 12 lbs? or just the West Germans? Should I keep the original grips and trigger bar spring, or update it to modern grips, or even e2 grips? I know some people would consider changing them sacrilege, but I would probably dry fire the gun a lot with snap caps to get used to the DA trigger. Is the old trigger bar spring wearing the frame and possibly breaking a real issue? I've also read the e2 grips have some reliability issues. Finally, is it necessary to change any springs on the gun if it hasn't been shot much? I mean it was still probably made in the early 90s. |
July 12, 2018, 01:57 PM | #2 |
Senior Member
Join Date: October 13, 1998
Location: Arizona Territory
Posts: 1,092
|
My P226 Sigs all have the same good trigger pull. My older German made P226 feels just like my recent manufacture P226s.
I wouldn’t bother replacing anything unless it fails or has some apparent wear. I have not replaced anything in my older Sigs and they all still work as well as when they were new. You may wish to pick up a spare recoil spring and compare it to your original from time to time. If your original spring has compressed an inch or so or feels weaker, it might be a good idea to replace it. I did replace the grips on my P226 pistols with Hogue G10 grips because the Hogue grips are slightly smaller and fit my hand better. These are very reliable robust pistols. It’s unlikely you will ever have to repair anything on them aside replacing an occasional spring.
__________________
NRA Life Member Mechanical engineers have their moments. |
July 12, 2018, 03:33 PM | #3 | ||||
Senior Member
Join Date: November 23, 2010
Posts: 4,862
|
Quote:
Quote:
Quote:
There are a number of parts that get installed with the e2 grips - it's not as simple as just screwing them on (but they are not difficult to install). Still, unless you have tiny hands, I feel they are completely unnecessary. The grip feel of the standard P226 with the original checkered West German grips is quite nice. Quote:
https://www.realgunreviews.com/why-y...er-bar-spring/ I definitely say go for it if the price is good. |
||||
July 12, 2018, 07:07 PM | #4 |
Senior Member
Join Date: January 10, 2011
Posts: 277
|
My first handgun was a German p228 I bought around 2002. I never shot it a huge amount, and when I did I have to admit it was pretty much all single action, but I remember the DA trigger was difficult but manageable. I stupidly sold it to get a glock 19, since I thought that was the better combat trigger and I didn't yet appreciate German Sigs.
Almost 10 years later Sig did a limited run of p226's with German stamped slides on a German railed frame so I bought one. The DA trigger felt noticeably lighter. I assumed it was because I was just a more experienced shooter by that time, but maybe the p228 had the 12lb trigger and that p226 was the newer 9-10 lb trigger. I never realized older West German Sigs had a 12lb one until yesterday. Either way I'm going to buy the W German p226. They are such well made guns, I've never even heard about anyone having reliability problems with a German p226/228 out of the box. |
July 12, 2018, 07:16 PM | #5 |
Senior Member
Join Date: July 30, 2006
Posts: 308
|
Mine is from the early 1990's and the DA trigger is exactly the same as my M11A1.
I did put a short reset trigger just because. |
July 12, 2018, 08:47 PM | #6 |
Senior Member
Join Date: July 20, 2009
Location: PA
Posts: 1,731
|
Ditto on the G10s, great improvement on my 228.
__________________
2024 PA Cartridge Collector Show; Aug. 16-17, 2024!!! Buy...Sell...Trade All Types of Ammunition & Ordnance PM or email me for 2024 show details. |
July 13, 2018, 08:20 AM | #7 |
Senior Member
Join Date: March 18, 1999
Location: Nogales, AZ USA
Posts: 4,000
|
My c1986 W. Germany P226 had a horribly heavy and gritty DA trigger pull.
I attribute most of that to the captive mainspring on the hammer strut. So, I updated it to the modern plastic mainspring seat and lighter mainspring, installed the SRT, and e2 grips. Now, it feels as good as I think it can get, short of sending it to Gray's Guns.
__________________
God gave you a soul. Your parents, a body. Your country, a rifle. Keep all of them clean. |
July 13, 2018, 11:01 AM | #8 |
Senior Member
Join Date: January 10, 2011
Posts: 277
|
My German p226R had the best trigger in both DA and SA I've ever shot, and I was more accurate with it than any other gun I've ever owned. That thing was a Cadillac. Selling it was painful but I got back what I originally spent on it.
I don't remember being nearly as accurate with my older p228, especially if I was firing quickly in DA. In hindsight the DA trigger was smooth but seemed a little heavy to me, so it makes sense if it was 12 lbs. If this W German is like that gun it'll take some practice. I'm looking forward to having a 9mm DA/SA again though after several years of using a .40 glock. Ive never held E2 grips, but they look like sandpaper. |
July 13, 2018, 11:09 PM | #9 |
Senior Member
Join Date: January 10, 2011
Posts: 277
|
So I got the gun in. It turns out the DA trigger is just as smooth as my last Sig. It doesn't feel heavy at all. The gun has definitely been shot more than the seller implied though, so it wasn't quite the deal I thought it would be. I probably paid about what it was worth though.
I also like the old style grips better than the newer ones, so I don't plan on changing anything on the gun and will keep it bone stock. |
|
|