The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old December 6, 2009, 10:11 PM   #2226
cinchup313
Junior Member
 
Join Date: December 6, 2009
Posts: 2
can any one help me get the model number and age of my .32 short SN 243
cinchup313 is offline  
Old December 7, 2009, 08:46 PM   #2227
novice1970
Junior Member
 
Join Date: December 7, 2009
Posts: 5
38 S&W

Hoping someone can help me date a gun that was originally my grandfathers. It is a .38 and hinges open. The numbers 22070 appear at the bottom of the grip and at two other locations that I found. On the top of the barrel is says "Smith and Wesson Springfield Mass USA Pat'd FEBY 20.77. DEC 18.77. MAY 11.80 SEPT 11.83 OCT 2.83 TWO AUG 4. 85" Those are the only writings that are visible. I suppose I could snap some pictures if it would help.

Thanks
novice1970 is offline  
Old December 7, 2009, 10:36 PM   #2228
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
can any one help me get the model number and age of my .32 short SN 243
I assume by .32 short you mean .32 S&W? Is it a break open design? Double action or single action? With hammer or hammerless? Any other info you can provide.

Edit: I noticed in another thread you listed the SN as 243***. How many digits does it have, any letters also?
Quote:
Hoping someone can help me date a gun that was originally my grandfathers. It is a .38 and hinges open. The numbers 22070 appear at the bottom of the grip and at two other locations that I found.
Same as above, double action or single action? With hammer or hammerless?
Pictures always help.

Jim

Last edited by laytonj1; December 7, 2009 at 10:55 PM.
laytonj1 is offline  
Old December 8, 2009, 10:30 AM   #2229
novice1970
Junior Member
 
Join Date: December 7, 2009
Posts: 5
Smith & Wesson age

Thanks for the reply Laytonj1.

The gun is hammerless. There is no way to cock the gun without pulling the trigger. Is this double action? I will research how to post a picture. As my name implies....I am a novice. Hopefully this will help.
novice1970 is offline  
Old December 8, 2009, 10:37 AM   #2230
novice1970
Junior Member
 
Join Date: December 7, 2009
Posts: 5
Smith & Wesson Age

Think I figured it out. Here are a couple of pictures.

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
novice1970 is offline  
Old December 8, 2009, 11:19 AM   #2231
Unfettered_Might
Junior Member
 
Join Date: December 8, 2009
Location: Mount Washington, KY
Posts: 1
I have a similar firearm to novice1970. 38 top break, but with a hammer. Nickle plated, double action. The serial number is 125877 on the bottom of the handle and as far as I can tell it's the only number. Does anyone know what the age is on this gun?
Unfettered_Might is offline  
Old December 8, 2009, 07:14 PM   #2232
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
Novice1970:
You have a .38 Safety Hammerless 2nd Model manufactured between 1887 & 1890. This is a black powder gun, shooting modern smokeless ammunition through it will hasten wear.

Unfettered_Might:
I am assuming your gun has some S&W markings on it, if so it is a .38 Double Action 3rd Model manufactured between 1884 & 1895. Serial range started at 119001 so it's a safe bet your gun was made in 1884 or 1885.
Radagast is offline  
Old December 9, 2009, 12:31 AM   #2233
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
There is no way to cock the gun without pulling the trigger. Is this double action?
Yes.

Jim
laytonj1 is offline  
Old December 9, 2009, 08:44 AM   #2234
silverwings
Junior Member
 
Join Date: December 2, 2009
Posts: 1
smith & wesson serial number

I have 2 J-frame smiths. One is a model 60 stainless with serial #R219183 and the other is a model 36 3" square butt with serial #J510428 and also have a S&W model 39 9mm with serial #64722. Can anyone narrow down the years that these were manufactured for me ? Thank You
silverwings is offline  
Old December 9, 2009, 10:29 AM   #2235
novice1970
Junior Member
 
Join Date: December 7, 2009
Posts: 5
S&W age

Layton1 and Radagast:

Thanks for the information. The history is very interesting. Any ideas on a value? Have either of you used S&W website to get a "Letter of Authenticity"? It seems like the letter would be a nice piece to have considering I do not intend to sell the gun and would rather pass it down to the next generation.
novice1970 is offline  
Old December 9, 2009, 11:13 AM   #2236
yarman
Junior Member
 
Join Date: December 9, 2009
Posts: 2
Smith & Wesson Age

I just purchased a beautiful S&W 38 Special CTG, model 10-8, with 4" heavy barrel at a local gun shop. I was told that it was manufactured in 1984, had never been sold or fired. and was still in it's original box. The butt serial no is 4D32067 (yoke ser no is 80252). I have no reason to doubt any of what I was told. Just curious if that 1984 date is an accurate one. Any help is most appreciated.
yarman is offline  
Old December 9, 2009, 12:59 PM   #2237
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
silverwings:

Mod. 60/R219183: 1978
Mod. 36/J510428: 1976-77 (pretty much right in the middle of the range for those years).
Mod. 39/64722: The info in SCSW is not very specific. SN 1001 was 1954, 115000 was 1970. You can interpolate between those two ends of the range and get an idea, but it will only be approximate.

yarman: 1979 (by 1984 they had switched over to the 3-letter SN prefix). Yours should also have a pinned barrel, which dates it to pre-1982. BTW, the number in the yoke is not an SN. That's called an assembly number and it's used to keep track of fitted parts during manufacture.
FlyFish is offline  
Old December 9, 2009, 02:28 PM   #2238
rjbiz
Junior Member
 
Join Date: December 9, 2009
Location: North Coast of Ohio
Posts: 4
S & W No 1 age

What year would a S&W No. 1 .22 cal single action revolver have been made. Thanks of you assist.
rjbiz is offline  
Old December 9, 2009, 03:01 PM   #2239
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Quote:
What year would a S&W No. 1 .22 cal single action revolver have been made.
1857 - 1881

It would be possible to narrow that down a bit with the serial number or a description and/or photos.
FlyFish is offline  
Old December 9, 2009, 03:08 PM   #2240
rjbiz
Junior Member
 
Join Date: December 9, 2009
Location: North Coast of Ohio
Posts: 4
Sorry...

Forgot the ser. no. 923XX. Frame is brass, square butt, spur trigger. Thanks for fast input!
rjbiz is offline  
Old December 9, 2009, 03:27 PM   #2241
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Quote:
ser. no. 923XX. Frame is brass, square butt, spur trigger
That SN makes it a Model Number One, 2nd Issue. They were manufactured from 1860 (at SN 11672) to 1868 (SN 126361). About 117,000 were made. Value ranges from a few hundred $ to a few thousand $, depending on condition.
FlyFish is offline  
Old December 9, 2009, 03:30 PM   #2242
rjbiz
Junior Member
 
Join Date: December 9, 2009
Location: North Coast of Ohio
Posts: 4
Thanks

Thanks for you help FlyFish! Greatly appreciated.

Last edited by rjbiz; December 9, 2009 at 03:31 PM. Reason: mispelled word
rjbiz is offline  
Old December 9, 2009, 04:54 PM   #2243
VVG
Senior Member
 
Join Date: November 28, 2001
Location: Boston
Posts: 645
Just bought a used 1006 with SN TEVxxxx. When was it manufactured?

I also have a 3913, SN VBAxxxx, which I believe was manufactured in 1998.

TIA.
VVG is offline  
Old December 9, 2009, 05:18 PM   #2244
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Quote:
Just bought a used 1006 with SN TEVxxxx. When was it manufactured?

I also have a 3913, SN VBAxxxx, which I believe was manufactured in 1998.
The information on autos in SCSW is very incomplete. The TEV SN prefix corresponds, with some certainty, to a manufacturing date of 1990, but the VBA prefix could be as early as 1994, though 1998 wouldn't be impossible from the information given.
FlyFish is offline  
Old December 9, 2009, 06:28 PM   #2245
yarman
Junior Member
 
Join Date: December 9, 2009
Posts: 2
Thanks to FlyFish

Thank you so much for the information. You are correct about the pinned barrel. It is a beautiful gun. Thanks again for your time and expertise.
yarman is offline  
Old December 9, 2009, 06:35 PM   #2246
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
novice 1970: The standard catalog of S&W gave the following values in 2006:
ANIB $750, Excellent plus $600, excellent $475, Fine $300, Very good $235, Good $195, Fair $135, Poor $75.

I've never used the factory letter service, but have seen copies posted on forums like this. It will be fairly boilerplate, other than giving the date of shipping and where it was shipped to. They become fascinating when the gun is a special order gun with a connection to a historical character.
Radagast is offline  
Old December 9, 2009, 07:11 PM   #2247
Herbie
Junior Member
 
Join Date: December 9, 2009
Posts: 2
what do I have?

S&W Mod 17 38 Revolver, 6" barrel, Blue, Double action, Large Diamond at handle screw hole, Target hammer, heavy target barrel. Serial # K 20XXX. Sold as a K22 masterpiece.
Herbie is offline  
Old December 9, 2009, 07:29 PM   #2248
Major 2
Member
 
Join Date: December 6, 2009
Posts: 47
Since so many have asked...

Could I get manufacture date on my Nickel Mod. 36 in 38 Spl. ?
AAR79xx

And is +P proofed ?

Thanks
Major 2 is offline  
Old December 9, 2009, 11:51 PM   #2249
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
S&W Mod 17 38 Revolver, 6" barrel, Blue, Double action, Large Diamond at handle screw hole, Target hammer, heavy target barrel. Serial # K 20XXX. Sold as a K22 masterpiece.
A K-22 / model 17 is chambered in 22LR. If it's a 38 special then it's a K-38 / model 14.
The serial number (K20XXX) dates it to 1948. For that time period the same serial number should also be on the underside of the barrel and back of the cylinder.

Side note: A K-22 / K-38 from early 1948 would likely have a tapered, thin barrel. Is there only 5 digits after the "K" in the SN or 6?

Quote:
Could I get manufacture date on my Nickel Mod. 36 in 38 Spl. ?
AAR79xx

And is +P proofed ?
1982. And no.

Jim

Last edited by laytonj1; December 9, 2009 at 11:56 PM.
laytonj1 is offline  
Old December 10, 2009, 05:38 AM   #2250
Major 2
Member
 
Join Date: December 6, 2009
Posts: 47
Thank you kindly
Major 2 is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:49 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.52795 seconds with 9 queries