The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old April 23, 2009, 08:54 PM   #1376
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
tracyballard: Your 10-5 was made in 1971 or 1972, the serial number range for those years was D330001 to D420000. The D serial range range from 1968 to 1977, followed by the 1Dxxxxxx range.
Radagast is offline  
Old April 25, 2009, 04:32 PM   #1377
Hedley
Senior Member
 
Join Date: May 9, 2006
Location: South Texas
Posts: 1,279
Ok, I just inheited what I think is a model 10. Serial no. 4626xx, four screw, half moon front sight, 6-shot, mushoom head ejector and "made in USA" on frame. Right side of barrel says .38 S&W Special CTG and top of barel has patent dates for Feb 6 06, Sept 14 09, and Dec 29 14. I was told that the finish was once nickel, and the factoy stocks have since been changed to pearl.
Hedley is offline  
Old April 25, 2009, 10:07 PM   #1378
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
Hedley: You have a S&W .38 Miltary & Police Model of 1905 4th change. This is the direct predecessor to the model 10, made from 1915 to 1942. Serial numbers in the 500,000 range shipped in 1927, so I would estimate your gun as dating to the early 1920s.
Real mother of pearl grips will add value, fake ones will detract. If most of the finish is worn off it it won't have a lot of value to a collector, nickel was a factory option and in good condition would add value.
Radagast is offline  
Old April 26, 2009, 04:05 PM   #1379
Hedley
Senior Member
 
Join Date: May 9, 2006
Location: South Texas
Posts: 1,279
Thankyou for the info. The revolver was my great grandfather's, and my father had it refinished in the 70's, and was completely aware of the diminished collector value. The finish looks to be a brushed nickel.
Hedley is offline  
Old April 26, 2009, 05:22 PM   #1380
cwcollins
Junior Member
 
Join Date: April 26, 2009
Posts: 2
Smith & Wesson 32 long colt

i have a S&W hand ejector model of 1903 5th model change i think. it is a 32 long colt caliber. serial # 218075
i am trying to get some info on it as well as where i can get some ammo. it is out or production

Last edited by cwcollins; April 26, 2009 at 08:51 PM. Reason: spelling error
cwcollins is offline  
Old April 26, 2009, 08:28 PM   #1381
Hedley
Senior Member
 
Join Date: May 9, 2006
Location: South Texas
Posts: 1,279
Here you go Radagast. The stock panels sure look like real mother of pearl to me. Any idea as to what finish was applied to this gun?

Hedley is offline  
Old April 27, 2009, 03:50 AM   #1382
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
Thanks for the pic Hedley. The grips aren't S&W grips, they lack the god S&W medallions, but may still add a little to the value.
I'm guessing the finish is either nickel or hard chrome, which does kill the value to a collector, but it's still a shooter.
Radagast is offline  
Old April 27, 2009, 03:59 AM   #1383
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
cwcollins: AFAIK S&W never chambered guns in the .32 colt round, the .32 Hand Ejectors were chambered in .32 S&W Long. Serial number 218075 places it as a.32 Hand Ejector Model of 1903 Fifth Change, manufactured between 1910 & 1917 in the serial number range 102501 to 263000. These guns were built on the I frame which was a little smaller than today's J frame Chief's Special.

The .32 S&W long is still manufactured, the gun will also chamber .32 S&W (sometimes referred to as .32 S&W short). Old Western Scrounger lists it:
http://www.ows-ammo.com/catalog/prod...roducts_id/298
Radagast is offline  
Old April 27, 2009, 09:06 AM   #1384
cwcollins
Junior Member
 
Join Date: April 26, 2009
Posts: 2
thanks for the info. i have a box of 32 long colt that my father was sold several years ago. i was afraid to use it in this pistol until i checked it out.

thanks again
cwcollins is offline  
Old April 27, 2009, 11:02 PM   #1385
miker415
Junior Member
 
Join Date: April 27, 2009
Posts: 2
Could I get help with build years on these two please?

Top is a nickel .38 special 15-4 serial # 20K85xx

Bottom is a stainless .357 magnum 686 serial # ACK30xx

Thanks to anyone that can help.

miker415 is offline  
Old April 28, 2009, 06:12 AM   #1386
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
miker415: Your 15-4 was made in 1977, serial range for that year was 10K0001-24K9999.

Your 686 should date from between January 1983 (serial number ABL4000) & October 1983 (serial number ADE6700). There is a recall in effect for all 686 no dash and 686-1 guns, if your gun has been through the recall it should have an M stamped after the model number.
Radagast is offline  
Old April 28, 2009, 06:19 AM   #1387
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
cwcollins: the .32 S&W long had the same cartridge length as the .32 long colt, but the long colt case is slightly narrower and tapered.
You could probably fire them safely through your gun, although the cases would likely split or swell to match the chambers.
I personally wouldn't do it. It's an old gun, find the right ammo and keep safe.
Radagast is offline  
Old April 28, 2009, 07:45 AM   #1388
miker415
Junior Member
 
Join Date: April 27, 2009
Posts: 2
Thank you for the information Radagast. I have been aware of the recall for some time on the 686 but have never done anything about it. I think the mod has something to do with the pin not striking deep enough with certain ammo. I have had the gun do this. Odd thing is I have had the 15-4 do it also, in fact just two times ago at the range. I pulled through that round again and it fired. I guess I should have both guns checked. Can any gunsmith do the recall on the 686 or does it have to go to Smith & Wesson?

BTW, both of these guns are awesome. I bought the 686 used in 1986 or 1987 for $275. It came with upgraded sights, a worked trigger, a Bianchi beltless holster, the original wood grips, and the Pachmayr grips. I bought the 15 used for $250 in 1988. It came with a black police style holster, two speed loaders, and a matching speed loader case. The guy I bought it from got it from a retired L.A. police officer.

Both guns shoot very smooth and accurate. Unfortunately, both are a little too large to carry concealed. I'm thinking of picking up a 9 or 380 to carry with the CCW permit.
miker415 is offline  
Old April 28, 2009, 12:19 PM   #1389
danfree
Junior Member
 
Join Date: April 28, 2009
Posts: 5
Hi. I just purchased my first handgun, S & W 686 with 4" barrel. The store clerk said that it was new, but I have my doubts about that. To my untrained eye, it looked to be in very good shape and the price was $599. I can pick it up in 3 days to comply with the mandatory waiting period. I sent Smith and Wesson an email through customer service a few days ago to request any info on this weapon, but have not heard back from them. The serial number is CHZ9xxx. Can anyone give me an idea when the date of manufacture is? The reason my suspicions are up is because, I told the clerk I would be willing to pay a bit more for a NIB revolver. She replied that the 686 was getting scarce and may be hard to find. The gunpowder residue on the cylinder was from test firing at the factory?? She put the handgun in a smith and wesson box with the manuals, but I have a feeling it was someone else's trade-in or such. Still $600 did not seem like a bad deal, so I agreed to the purchase. However, if it is more that 5 or 6 years old, I may just have them order a new one anyway.

Update:
The S & W folks did get back to me just a few minutes ago. They say it was manufactured in 2005 at Springfield, MA.

Last edited by danfree; April 28, 2009 at 03:26 PM. Reason: Update
danfree is offline  
Old April 29, 2009, 09:46 AM   #1390
keithk
Junior Member
 
Join Date: April 12, 2009
Posts: 9
Can someone look up a S&W 686, SN# AAF7670

TIA
keithk is offline  
Old April 30, 2009, 03:42 AM   #1391
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
keithk: October 1982. Open the cylinder, if there isn't an M stamped after the model number then it is subject to a recall for modification. S&W will pay the shipping. With soft primers and magnum loads it's possible for the primer to flow back around the firing pin and lock up the gun. The modification replaces the firing pin and pushing to prevent this from occurring.
Radagast is offline  
Old April 30, 2009, 09:47 AM   #1392
carguychris
Senior Member
 
Join Date: October 20, 2007
Location: Richardson, TX
Posts: 7,523
Quote:
Open the cylinder, if there isn't an M stamped after the model number then it is subject to a recall for modification. S&W will pay the shipping. With soft primers and magnum loads it's possible for the primer to flow back around the firing pin and lock up the gun. The modification replaces the firing pin and pushing to prevent this from occurring.
You should call S&W before sending it in because I've heard that they recently stopped "M"-stamping recalled guns, so your gun may have been fixed even if there's no "M" stamp.
carguychris is offline  
Old April 30, 2009, 10:25 PM   #1393
sculpin1
Junior Member
 
Join Date: April 30, 2009
Location: Southern Maryland
Posts: 9
S&W Model 29

I'm trying to find the approximate manufacture dat and approximate value of a Model 29, blued, 8 3/8" barrel. It ust says Model 29, not 29-1, 29-2, etc.

The number on the butt end of the grip is AED88XXX, There are also other numbers 4X057 and 4758 on different areas...

I would estimate the bluing to be a good 98%. No visible wear and tear anywhere.

Any info would be greatly appreciated.

Thanks

Sculpin
sculpin1 is offline  
Old May 1, 2009, 06:45 AM   #1394
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
sculpin1: AED88xx should be from between January 1983 & October 1983, which would make the gun a 29-3. There should only be four digits after the three letters, not the five you have indicated.

The 29 no dash was produced from 1957 to 1962, the 8 & 3/8 inch barrel was introduced in 1958, the serial number range for that period was S179000 to S220000.

At a guess I would say you have a 29-3 that was mis-stamped.
Radagast is offline  
Old May 1, 2009, 10:53 AM   #1395
sculpin1
Junior Member
 
Join Date: April 30, 2009
Location: Southern Maryland
Posts: 9
Radagast

Thank you very much for that info!

You are right, (sorry) I double tapped the "8"!

It was purchased (new) in the late 70's to early 80's time frame, so 1983ish sounds right.

Thanks again!

Sculpin

Last edited by sculpin1; May 1, 2009 at 11:59 PM. Reason: ...removed an errant question.
sculpin1 is offline  
Old May 1, 2009, 05:08 PM   #1396
Bengel
Junior Member
 
Join Date: May 1, 2009
Posts: 2
Anything special about a low serial number?

A friend showed me his Dad's 38 special. The serial number is J331xx. He wanted to know if there was anything special about having what appears to be a low J series serial number. Anybody know if this means much?

Thanks...
Bengel is offline  
Old May 2, 2009, 06:20 AM   #1397
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
Bengel, J33155 dates from 1969 or 1970. It's not particularly rare, the J frames were introduced at serial number 1 in 1950 and continued until serial number 786544 in 1969, when the serial range started again at J1. unless it has target sights and or a three inch barrel it is not going to bring s premium from a collector.
Radagast is offline  
Old May 2, 2009, 07:41 AM   #1398
Bengel
Junior Member
 
Join Date: May 1, 2009
Posts: 2
Thank You...

Radagast,

Thank you for your help.
Bengel is offline  
Old May 3, 2009, 04:18 PM   #1399
ToyotaMike
Junior Member
 
Join Date: May 3, 2009
Posts: 2
Can anyone give me a date on my pistol?

My grampa gave me a pistol and I just want to know what it is and a date?
19-2
k777-xxx any help?
ToyotaMike is offline  
Old May 4, 2009, 08:51 AM   #1400
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
ToyotaMike: 1967.
Radagast is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.47379 seconds with 9 queries