June 8, 2011, 05:38 PM | #1 |
Member
Join Date: March 14, 2011
Posts: 76
|
Marlin XS7
My dad just bought a new Marlin XS7 .243 with a Redfield Scope. We had it mounted at the gun shop we bought it from. Is there a mount that will allow us to move the scope back farther? It's hard to get a good view from that far away.
|
June 8, 2011, 06:25 PM | #2 |
Senior Member
Join Date: September 16, 2009
Location: I live in the foot of the Green Mountains of Vermont
Posts: 1,602
|
Looks like you could put an extension Ring on the front and gain all or most of the setback that you need !
|
June 8, 2011, 06:58 PM | #3 |
Senior Member
Join Date: April 8, 2009
Location: Batchelor, La.
Posts: 579
|
Appears to be Weaver type rings--no catalog in front of me and I don't remember if anyone makes offset rings of that type. I you'd get a proper Leupold or other steel mount you can easily find offset rings to solve your problem. Goatwhiskers
|
June 8, 2011, 07:42 PM | #4 |
Senior Member
Join Date: June 20, 2007
Location: Rainbow City, Alabama
Posts: 7,167
|
Yep, Leupold "standard" base and Leupold low or medium "extended" standard mount rings will give you an extra inch.
HOWEVER, I don't believe that is your problem. That scope looks to be properly mounted. If you are having to crane your neck to get close enough then you have a stock problem. You said "your Dad" bought it. I'm assuming you are still young? I'm thinking you need a youth stock. It will be about 1 1/2" shorter than a standard sized stock. They are available from Marlin for a very reasonable price. |
June 8, 2011, 07:56 PM | #5 | |
Member
Join Date: March 14, 2011
Posts: 76
|
Quote:
|
|
June 8, 2011, 08:09 PM | #6 |
Senior Member
Join Date: June 20, 2007
Location: Rainbow City, Alabama
Posts: 7,167
|
Thanks for setting me straight. Assuming both of you are a normal sized people my next thought is that maybe this scope has really short eye relief. That being the case, you are either going to have to move the scope back or replace it with a scope with longer eye relief.
Like I said earlier, Leupold extended rings will probably give you about an inch or so. With their extended rings, you get one funky shaped ring that is offset and one normal one. Using the normal one in back and the funky one in front with the offset facing the butt you can move the scope back until either the turrent bumps into the rear ring or the bell bumps into the front ring. I can't see the bell in your picture, but if you will have receiver clearance problems when backing the scope up you can go to high or extra high rings to give more vertical clearance. |
June 8, 2011, 08:14 PM | #7 |
Member
Join Date: March 14, 2011
Posts: 76
|
Thanks Doyle, I will check it out online, hopefully it will work out.
|
|
|