|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
May 5, 2020, 08:33 PM | #26 |
Senior Member
Join Date: February 9, 2006
Location: Homes in Brooklyn, NY and in Pennsylvania.
Posts: 5,473
|
I tried to copy your process. No joy at the end.
65 grams KNO3, 30 grams charcoal, 5 grams superfine sulfur. Mixed well. Added pure alcohol to make a slurry. Ran it in a mixer until it turned into a thick paste. Pushed it through a fine mesh. Let it dry. Loaded into a golf ball mortar the charge wrapped in tin foil. Lit the fuse. It burned but did not go bang. The golf ball did not move. Got any ideas about where i went wrong? I am wondering now whether the charge has to be compressed in order to ignite properly. Pete PS ...primers. Years ago I bought a “Tap-O-Cap” kit and a whole bunch of toy gun caps. The process is easy enough and they work but taking a #11 out of a can is a whole lot simpler. I stocked up on those. The other thing I did for most of my BP shooting was bypass primers altogether and go to flintlocks.
__________________
“Auto racing, bull fighting, and mountain climbing are the only real sports ... all others are games.” Ernest Hemingway ... NRA Life Member Last edited by darkgael; May 6, 2020 at 03:50 AM. |
May 6, 2020, 06:36 PM | #27 |
Junior Member
Join Date: March 5, 2020
Posts: 11
|
rodwhaincamo: My formula is the regular 75% Potassium Nitrate, 15% Charcoal and 10% Sulfur. But I use grapevine charcoal and dissolve all ingredients in isopropyl alcohol, not just wet it, I turn it into a liquid. Then let it dry and when it becomes a paste I press it through a mesh screen and leave the grains to dry for a couple days. I grind all ingredients SEPARATELY in a coffee grinder for 40 seconds each. I don't grind them together because they could ignite and explode inside the grinder. Safety first!
|
May 7, 2020, 05:16 PM | #28 |
Senior Member
Join Date: August 30, 2010
Posts: 1,635
|
This is the definitive thread on making your own black powder:
http://castboolits.gunloads.com/show...e-black-powder Be aware that the thread is 155 pages long currently, and there are a ton of people who jump in without having read any of the preceding pages to lecture you on how you are going to blow yourself up, etc. etc. etc. The thread starts off with the "screen mesh" process, but finally winds up talking about corned powder, which is how commercial BP is made. As this thread indicates, there are multiple ways to arrive at something that goes bang. But to make BP, all you need is charcoal, sulfur, potassium nitrate, and water. The ingredients are milled together, and then crushed under high pressure. This makes cake. This cake is then busted up and ground, and the grindings are sifted through screens to get different granulation sizes of finished BP. Fines can be recycled back to the beginning of the process. Commercial powder is "glazed" with graphite. This is probably done to ease metering of the product, and also probably makes it less sensitive to static discharge, since graphite is a good conductor of electricity. But in the 1800s the British Empire specifically prohibited glazing of black powder with graphite, as I recall reading someplace. Steve |
May 10, 2020, 06:18 AM | #29 |
Senior Member
Join Date: February 9, 2006
Location: Homes in Brooklyn, NY and in Pennsylvania.
Posts: 5,473
|
Success
Interesting. In my earlier post, I noted a failure to perform. I had tried BP that I made using the Alcohol method mentioned earlier in this thread. Just a fizzle when I tried it in a golf ball mortar.
What had I missed? As it has turned out, i had missed the note that the powder had been compressed when used in the pistol and in shotshells. Duly I loaded a couple of shotshells with 70 grains of what I had made and 1 -1/8ths oz of shot. Those shells worked perfectly.
__________________
“Auto racing, bull fighting, and mountain climbing are the only real sports ... all others are games.” Ernest Hemingway ... NRA Life Member |
May 10, 2020, 08:23 AM | #30 |
Senior Member
Join Date: May 9, 2016
Posts: 270
|
That's because homemade powders tend to be much less denser than commercial ones. At least in case of mine, too.
|
May 10, 2020, 08:40 AM | #31 |
Senior Member
Join Date: May 19, 2010
Posts: 102
|
Skylighter has a tutorial for "screen powder" posted on their website -
https://www.skylighter.com/blogs/how...quick-and-easy And a fellow called "Brushhippie" has a good video on Gunstreamer - https://gunstreamer.com/watch/homema...s7R4gTNkL.html I would note that Skylighter recommends including 1% Dextrin, while Brushhippie calls for 5%.... those might be considered the "minimum" and "maximum" values. |
May 10, 2020, 12:53 PM | #32 |
Senior Member
Join Date: September 7, 2009
Location: N. Dakota
Posts: 435
|
I made some BP from some willow charcoal I made. Didn't add anything but sulfur and potassium nitrate. I milled is in my ball mill with some lead balls. It turned out pretty good, seemed to have a some decent power. The one thing I wish I had tried was pressing it wet, into a cake them letting it dry. Mine ended up with a large amount of fine powder. It was fun to try but alot of work when a guy can buy either real BP or good substitutes. But knowing me I'll do it again, I seem to like moinkeying around with things like that.
__________________
We've all heard that a million monkeys banging on a million typewriters will eventually reproduce the entire works of Shakespeare. Now, thanks to the Internet, we know this is not true. |
Thread Tools | Search this Thread |
|
|