The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools Search this Thread
Old April 11, 2018, 03:11 PM   #1
AbleJones
Junior Member
 
Join Date: April 11, 2018
Posts: 2
Help with 1884/91 Springfield Trapdoor Carbine

Inherited from my FIL this beautiful piece of history. I am very grateful to him for being such an incredible steward. He owned it for over 45 years and always kept it in a climate controlled house. After I received it, I wipe down the stock with a mild cleaner, followed by a fresh coat of boiled linseed oil. I also put a fresh coat of Hoppes No. 9.

Here's where the help comes in; I always assumed that the rifle was 100% original (except for the sling) and hope it is.

Research has not helped. I have looked at a few sites including; https://gun-data.com/springfield_trapdoors.html

According to what I have found, there were no Carbines built in 1891. The serial number matches the Cartouche.

The barrel is 24"

Everything appears to be correct. What am I missing?

Hopefully the pictures will help.







Last edited by Mal H; April 11, 2018 at 09:25 PM. Reason: Resize images
AbleJones is offline  
Old April 11, 2018, 03:22 PM   #2
ThomasT
Senior Member
 
Join Date: January 22, 2009
Location: Texas
Posts: 2,746
Good Lord! What giant pictures. The barrel is sticking out one side of my computer and the butt stock out the other side.

My uncle had one close to what yours looks like and his had had the barrel cut down sometime way in the past. Fun to shoot though.

Did you get all those bags of micro fiber rags from Harbour Frieght?

Welcome to the forum.
ThomasT is offline  
Old April 11, 2018, 03:22 PM   #3
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 18,486
I don kno nuffin but does it have a "C" sight?
Jim Watson is offline  
Old April 11, 2018, 08:06 PM   #4
Hellgate
Senior Member
 
Join Date: November 18, 2010
Location: Orygun
Posts: 868
Is there a hole or a filled hole in the stock under the barrel where the ramrod used to go? The carbines did not have a ramrod under the barrel like the rifles. It looks like it has the Buffington rifle sight. I'm not sure, but don't think the carbines had the same sight. My guess is, it's a cut down rifle. What is the barrel length?
The rifles has 32 5/8" barrels, the cadet rifle was 29 5/8" barrel and the carbine had a 22" barrel. If yours is somewhere in between it is for sure a cut down rifle.
__________________
With over 15 perCUSSIN' revolvers, I've been called the Imelda Marcos of cap & ball.
SASS#3302 (Life), SASS Regulator, NRA (Life), Dirty Gamey Bastards #129
Wolverton Mtn. Peacekeepers (WA), former Orygun Cowboy (Ranger, Posse from Hell)
Hellgate is offline  
Old April 11, 2018, 09:05 PM   #5
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 18,486
Sources show a few 24" carbines.
Jim Watson is offline  
Old April 11, 2018, 09:27 PM   #6
Hellgate
Senior Member
 
Join Date: November 18, 2010
Location: Orygun
Posts: 868
The carbines also had a saddle ring attached to the left side to the stock.
__________________
With over 15 perCUSSIN' revolvers, I've been called the Imelda Marcos of cap & ball.
SASS#3302 (Life), SASS Regulator, NRA (Life), Dirty Gamey Bastards #129
Wolverton Mtn. Peacekeepers (WA), former Orygun Cowboy (Ranger, Posse from Hell)
Hellgate is offline  
Old April 11, 2018, 11:19 PM   #7
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 21,824
I think it's a cut down infantry rifle. That said, it's beautiful.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old April 12, 2018, 03:49 AM   #8
l.cutler
Senior Member
 
Join Date: October 18, 2005
Posts: 275
Yes it is a cut down rifle not a carbine. No ring, barrel the wrong length. Nicely done but still a cut down rifle.
l.cutler is offline  
Old April 12, 2018, 10:36 AM   #9
Lee44ShooterCnB
Member
 
Join Date: May 13, 2015
Location: Ga.
Posts: 68
Great looking rifle

Take a look at
https://www.nps.gov/spar/learn/histo...%20numbers.doc

http://www.trapdoorcollector.com

https://www.gunvaluesboard.com/1873-...r-3532637.html
Lee44ShooterCnB is offline  
Old April 12, 2018, 04:53 PM   #10
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
If there's no filled in hole in the front of the stock take off the barrel band. Sometimes they used the fore end tip from a broken carbine stock and you can see the seam under the barrel band. I don't know about those type sights but the older ones had an R stamped on them for rifle and a C for carbine. The graduations are different.
Hawg is offline  
Old April 13, 2018, 12:04 PM   #11
AbleJones
Junior Member
 
Join Date: April 11, 2018
Posts: 2
Going to add some close ups of the front end of the stock. Also going to check the other items mentioned in the posts.

If this is a "cutdown", which based on the comments, it may very well be, it was performed to perfection by an extremely talented Smith.

Thanks for all the help and suggestions.

~Able Jones
AbleJones is offline  
Old April 14, 2018, 04:15 AM   #12
l.cutler
Senior Member
 
Join Date: October 18, 2005
Posts: 275
It is well done but still a cut down, no carbines were produced after 1889 and there are a myriad of things "wrong" with it.
l.cutler is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:25 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.06118 seconds with 8 queries