The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old June 14, 2008, 06:27 PM   #226
DragonSlayer
Junior Member
 
Join Date: June 14, 2008
Location: Marysville Ca
Posts: 3
I found this sight by looking for all the information I could get on a Model 57S&W 41 mag. I've already bought it and have waited and wanted one for years. I do have the Shooters Bible but this ones not even listed. The serial # is N 60 XXXX Thank You in advance for any help. I got it for 350.00 and a fishin trip (I got him a 10lbs Striper) He thinks he got the deal, I know i did.
DragonSlayer is offline  
Old June 14, 2008, 07:21 PM   #227
tschmittel
Member
 
Join Date: July 19, 2007
Location: Chicago area
Posts: 81
How about a b-day for a Model 10-7 2" SB: 9-D11XXX?

Thank you.
tschmittel is offline  
Old June 15, 2008, 01:22 AM   #228
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I believe it is a Model 37 Chiefs Airweight Special with the alloy frame, steel cylinder & barrel, square butt, and pinned 1 3/4" barrel and would like to know the approximate age.

Serial is 704JXX
1971/72

Quote:
Yet another request for this popular thread!
I really thank those who spend the time to answer the questions.

Model 66-2 ADK2XXX
Late 1983

Quote:
Thanks a lot for the info on the BSH serial number. I hate to abuse this thread, but would anyone know approximately what year CDK97XX for a 629-5 would have been in? Would that be late 1990s?
1999

Quote:
need help dating a model 36 I picked up today. The number on the butt is 4J67XX. Trying to find out all little about the gun, and date. New to the S&W.
Nice gun. 1971/72

Quote:
I found this sight by looking for all the information I could get on a Model 57S&W 41 mag. I've already bought it and have waited and wanted one for years. I do have the Shooters Bible but this ones not even listed. The serial # is N 60 XXXX
1979

Quote:
How about a b-day for a Model 10-7 2" SB: 9-D11XXX?
1981

Jim
laytonj1 is offline  
Old June 15, 2008, 01:27 AM   #229
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Most commonly asked S&W J frame "J" prefix serial numbers posted again.

J serial Prefix serial numbers.
For models 36, 37, 38, 49, 50.

1969-1970 = J1 - J99999 pinned barrels
1971-1972 = 1J1 - 999J99
1973-1974 = J100000 - J250000
1975-1976 = J250001 - J370000
1976-1977 = J370001 - J610000
1977-1978 = J610001 - J670000
1979-1980 = J670001 - J760000
1981 = J760001 - J915400
1982 = J915401 - 1J18600 start non pinned barrels
1983 = 1J18601 - 1JXXXX

Jim
laytonj1 is offline  
Old June 15, 2008, 01:38 AM   #230
kamerer
Senior Member
 
Join Date: November 28, 2007
Location: Way west
Posts: 481
I'll try to answer or get close on the last few - I don't have my full reference handy so I'll do what I know and leave the others for someone with a book, but' I'll summarize the open questions to aid the next responder.

37 Chiefs 704jxx - I don't know
Model 66-2 ADK2XXX - that is 83 +/- 1 I believe - 83 I think.
CDK97XX for a 629-5 - 1999 I believe.
model 36 4J67XX - I don't know.
10-7 2" SB: 9-D11XXX - 1981
Model 57N 60 XXXX - 1980.

DragonSlayer- I looked up your user profile and have called your local cops. $350 for a 57 is a crime anywhere, and in California it is a serious felony. That is the deal of the week for sure, maybe the month. I know a few guys on the S&W forum who I swear would probably pop an aneurism and stroke out if they heard that.

Edit - oops, looks like Jim was working on it the same time I was and he posted before I did. Looks like we agreed. I think the 57 is '80 based on a non -SCSW reference (it is vague on that range/year). Looks like he understands or knows the J numbers much, much better than I can recall!
kamerer is offline  
Old June 15, 2008, 01:52 AM   #231
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Looks like he understands or knows the J numbers much, much better than I can recall!
I wish my memory was that good, I got both the 2nd and 3rd edition SCSW in front of me!

Quote:
I think the 57 is '80 based on a non -SCSW reference (it is vague on that range/year).
Agreed... a S&W letter beats the SCSW.
I see you keep late hours too.

Jim
laytonj1 is offline  
Old June 15, 2008, 02:49 AM   #232
kamerer
Senior Member
 
Join Date: November 28, 2007
Location: Way west
Posts: 481
Quote:
I see you keep late hours too.
yep, I do. But it's not 1am here yet - west coast. But I am fading fast. We spent a long day riding horses. Up in the "low" mountains at the base of the BIG mountains. Really pretty. First sunny day in western Washington in like a month, I swear. This spring has been awful! OK, rant off Here's some horse porn instead of gun porn for a change!

kamerer is offline  
Old June 15, 2008, 05:47 AM   #233
BigMikeUSMC
Junior Member
 
Join Date: February 22, 2008
Posts: 3
Thanks

Jim,

Thanks for the quick response - appreciate it!

Mike
BigMikeUSMC is offline  
Old June 15, 2008, 07:11 AM   #234
imrisk
Junior Member
 
Join Date: June 14, 2008
Posts: 2
Thanks guys for looking up my 66-2. I picked it up in a gun shop yesterday. Great shape. $399. I had no idea it was 25 years old. They did not seem to know either. It was very clean, but I cleaned it anyway last night and am going to go out and fire it this morning at the range.

Risk
imrisk is offline  
Old June 15, 2008, 02:00 PM   #235
kamerer
Senior Member
 
Join Date: November 28, 2007
Location: Way west
Posts: 481
Quote:
but I cleaned it anyway last night and am going to go out and fire it this morning at the range.
The only caution about K frame magnums is to NOT shoot lightweight magnum rounds in them - 125gr, 110gr, etc. These have been demonstrated to cause cracking at the 6 o'clock on the forcing cone. Some can take it, some crack after 50 to 100 rounds. Shoot any .38 you want, but stick with 14x grain or larger magnum loads.

One of the faults I consistently find with S&W revolvers over 15 years old is OVER maintenance by the user. Do not "lube it up" by pouring oil down the trigger slot, hammer slot, or hand window. This, over times, dries up to a varnish or gunk and interferes with the action. It is easy to clean out, but requires a few tricks to get the sideplate off properly without damaging the screws and flange in the hammer area of the sideplate.
kamerer is offline  
Old June 15, 2008, 02:37 PM   #236
dakuda
Member
 
Join Date: June 15, 2008
Location: Illinois
Posts: 65
I just paid for a S&W 686. I have to wait 2 more days until I can pick it up (IL laws....), but the SN is REH6xxx.

Just curious, as long as someone as some time to kill....

Thanks
dakuda is offline  
Old June 15, 2008, 05:43 PM   #237
Don_N
Junior Member
 
Join Date: June 13, 2008
Posts: 4
Thank you laytonj1 and kramerer!
Don_N is offline  
Old June 15, 2008, 06:24 PM   #238
DragonSlayer
Junior Member
 
Join Date: June 14, 2008
Location: Marysville Ca
Posts: 3
Thank you laytonj1 and kramerer!

Yes thank you both very much I was told it was somewhere in that era I'll see if i can load a picture so you too can appreciate the condition of this gun. Shot it today for the first time it was everything i hope it would be, the trigger was light but not too light the recoil wasn't a 44 but it had a bit of a bite.
DragonSlayer is offline  
Old June 15, 2008, 09:48 PM   #239
iapryx
Junior Member
 
Join Date: June 15, 2008
Posts: 2
I'm trying to figure out if my revolver is rated for .38 SPL +P, hope the serial helps figure that...

Model 10-7 AFW5979
iapryx is offline  
Old June 16, 2008, 12:39 AM   #240
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I just paid for a S&W 686. I have to wait 2 more days until I can pick it up (IL laws....), but the SN is REH6xxx.
My latest editon of Standard Catolog of Smith and Wesson only covers up to 2004, so I'm guessing your 686 was made after that. However, a call to S&W at 1-800-331-0852 (Inside USA) 8:00 a.m. to 8:00 p.m. Eastern Standard Time (Monday - Friday) will get you a DOB free of charge.

Quote:
I'm trying to figure out if my revolver is rated for .38 SPL +P, hope the serial helps figure that...

Model 10-7 AFW5979
Late 1984 and yes for +P.

Jim
laytonj1 is offline  
Old June 16, 2008, 05:55 AM   #241
dakuda
Member
 
Join Date: June 15, 2008
Location: Illinois
Posts: 65
Quote:
My latest editon of Standard Catolog of Smith and Wesson only covers up to 2004, so I'm guessing your 686 was made after that. However, a call to S&W at 1-800-331-0852 (Inside USA) 8:00 a.m. to 8:00 p.m. Eastern Standard Time (Monday - Friday) will get you a DOB free of charge.
Thank you, will do.
dakuda is offline  
Old June 16, 2008, 10:07 AM   #242
carguychris
Senior Member
 
Join Date: October 20, 2007
Location: Richardson, TX
Posts: 7,523
Quote:
I'm trying to figure out if my revolver is rated for .38 SPL +P, hope the serial helps figure that...

Model 10-7...
Any model-numbered .38 can safely fire +P according to an advisory in the current S&W revolver owner's manual. M10s can handle it just fine and I fire +P in my 10-5 all the time.

The only caveats are:

1) If you own one of the rare early Airweights with an aluminum-alloy cylinder, most books on the subject advise that these guns should not be fired at all, much less with +P ammo. The cylinders are simply too weak.

2) Some 'Net enthusiasts claim that older J-frames (such as non +P stamped M36s) will "shoot loose" if subjected to a steady diet of +P loads, but I'm not sure if this has ever really been factually verified. IMHO a steady diet of +P loads through a steel J-frame will probably wear out the owner before the gun.

3) There have been reports of Airweights suffering from cracked frames due to this treatment, although someone on the S&W forum tried to put this to the test by firing over 1,000 +P rounds through an M12... and the gun made it through without failure. Go here:

http://smith-wessonforum.com/eve/for...3481091842/p/1
carguychris is offline  
Old June 16, 2008, 05:43 PM   #243
dakuda
Member
 
Join Date: June 15, 2008
Location: Illinois
Posts: 65
Turns out the serial number was BEH6xxx, NOT REH6xxx. A typo on the receipt.

It is from 1989. Thanks for the help.
dakuda is offline  
Old June 18, 2008, 05:02 PM   #244
thughes4987
Junior Member
 
Join Date: June 18, 2008
Posts: 1
Old S&W

I have and older S&W revolver that my father gave me from my grandfather.

The only numbers I can find are 609##. Can anyone tell me the age and model. Just found it in the closet and haven't gotten a chance to go to gun dealer.
thughes4987 is offline  
Old June 18, 2008, 06:11 PM   #245
kamerer
Senior Member
 
Join Date: November 28, 2007
Location: Way west
Posts: 481
We'd need to know :

a) caliber
b) bbl length (from cylinder to muzzle)
c) grips shape (round or square)
d) number of shots/cylinder bores
e) type of sights.
f) if there is a letter in front of or anywhere near the s/n on the bottom of the grip

That number, if it is the s/n, should come from the butt of the grip (or under the barrel or face of the cylinder).

A picture or two is worth A LOT of words in this case...
kamerer is offline  
Old June 19, 2008, 01:06 AM   #246
The Bulldawg
Junior Member
 
Join Date: June 19, 2008
Posts: 2
Just curious on a date, any help is greatly appreciated

Mod. 29-5 BFH8xxx
The Bulldawg is offline  
Old June 19, 2008, 08:37 AM   #247
carguychris
Senior Member
 
Join Date: October 20, 2007
Location: Richardson, TX
Posts: 7,523
Add to kamerer's list:

g) How does the cylinder open? Does it rotate out to the left (Hand Ejector) or does the frame have a hinge that pivots the cylinder upwards when you actuate a latch on the rear frame (Top Break)?

carguychris is offline  
Old June 19, 2008, 08:38 AM   #248
carguychris
Senior Member
 
Join Date: October 20, 2007
Location: Richardson, TX
Posts: 7,523
Quote:
c) grips shape (round or square)
Open the link in reply #205 if you have trouble telling the difference.
carguychris is offline  
Old June 19, 2008, 01:33 PM   #249
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Just curious on a date, any help is greatly appreciated

Mod. 29-5 BFH8xxx
1990.

Jim
laytonj1 is offline  
Old June 20, 2008, 12:35 PM   #250
Abunai
Junior Member
 
Join Date: June 20, 2008
Posts: 2
Help with Serial Numbers/Dates for two S&W's.

Hi -

I'm looking for some assistance on manufacture dates for a couple of older Smiths that I've got in my collection. I've sent away for factory letters, but no reply yet.

The first is a 28-2 Highway Patrolman, .357, 6" barrel, marked "Wash State Patrol", in great shape. Serial #S271xxx. Underneath that is OD. 28-2.

Next is a 38/44 Heavy Duty, 6.5" barrel, 38 S.&W. Special Ctg, excellent condition. Serial S 161xxx on butt of pistol; with “6 4757” or “8 4757” with a 3 in a circle under the 4, and an H on top the 7 inside frame in yoke area.

Any help would be appreciated.
Abunai is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.06732 seconds with 9 queries