May 11, 2010, 07:03 PM | #1 |
Senior Member
Join Date: March 29, 2007
Location: Raleigh, NC
Posts: 1,391
|
Why?
I bought a three die Lee set with dipper and shell holder. I don't actually own any other loading equipment, let alone a 10mm. It appears that I have myself in a pickle, but $20 OTD just screamed deal to me. Aside from buying something in 10mm: Now what?
__________________
How could you have a slogan like "freedom is slavery" when the concept of freedom has been abolished? |
May 11, 2010, 07:31 PM | #2 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,061
|
Well, you just bought the wrench sockets for changing tires and spark plugs and oil. It may be time to buy the drive ratchet, the oil and the car?
Take a look at the Lee Anniversary Kit for your first drive ratchet. Powder and primer and bullets are separate. Guns are a personal choice. I would get one with a conventional (not polygonal) rifled barrel so lead bullets will work in it. They're least expensive to load with.
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
May 11, 2010, 07:34 PM | #3 |
Member
Join Date: March 16, 2010
Posts: 23
|
Because It`s There
I see a Colt Delta Elite in your future....
|
May 11, 2010, 08:24 PM | #4 | |
Senior Member
Join Date: November 7, 2008
Location: Shelby, MT
Posts: 1,013
|
Quote:
Sometimes you'll run across a deal for $500 or so. Great 10mm guns. Your dies should work for the 40 S&W too. |
|
May 11, 2010, 09:23 PM | #5 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,756
|
I've seen your posts -- they don't make a Jennings in 10mm you know!
Seriously... I bought a revolver a couple years ago because I had the dies, brass and some component bullets here... but your pickle is quite a crazy stretch. The only truly logical direction I can imagine would be to offer it up somewhere for sale or trade. This die set goes for $30 or $35 new.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
May 11, 2010, 09:52 PM | #6 |
Senior Member
Join Date: February 3, 2007
Location: Western NY
Posts: 598
|
I have the 4 die set. They will work with 40 S&W as well.
__________________
My Calibers: 22 Hornet, 223 Rem, 22-250, 243 Win, 270 Win, 280 Remington Ackley Improved, 30-30, 308 Win, 30-06, 300 Winchester magnum, 7.62x39mm, 380 Auto, 9mm Parabellum, 38 Special, 357 magnum, 40 S&W, 10mm Auto, 45 GAP, 45 Auto, 12 & 20 Guage |
May 12, 2010, 06:43 AM | #7 |
Senior Member
Join Date: June 23, 2009
Location: Wisconsin
Posts: 228
|
Sell it on Ebay, and start from scratch. Don't build a reloading hobby around one purchase.
What guns do you have? What calibers? Would you like to load better ammo than you can buy, for half the price or less of factory ammo? If the last question is something that sounds good, then buy The ABCs of reloading, a reloading manual or two, and read. Read here, read the sticky at the beginning of this forum about equipment, and ask questions. |
May 12, 2010, 07:35 AM | #8 |
Senior Member
Join Date: November 17, 2008
Location: gulf of mexico
Posts: 2,716
|
ive got .243 dies and brass, but no .243(yet)
__________________
There is only one tactical principle which is not subject to change. It is to use the means at hand to inflict the maximum amount of wound, death, and destruction on the enemy in the minimum amount of time." |
|
|