The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > NFA Guns and Gear

Reply
 
Thread Tools Search this Thread
Old November 8, 2018, 09:12 PM   #1
CDR_Glock
Senior Member
 
Join Date: September 30, 2010
Posts: 649
Ruger 10/22 for subsonic ammo in a suppressor

I built my Ruger to shoot subsonic ammo.

I used the lightest recoil spring that came with the Kidd kit.



Ruger 10/22

Magpul Hunter Stock
Kidd Trigger
Tactical Advantage Threaded Barrel
T&J Suppressor
Kidd bolt lever/guiderod/springs
Kidd Extractor

Only factory parts are the receiver and the bolt.




Sent from my iPhone using Tapatalk Pro
CDR_Glock is offline  
Old November 8, 2018, 10:35 PM   #2
Sharkbite
Senior Member
 
Join Date: November 4, 2013
Location: Western slope of Colorado
Posts: 3,257
And does it function with subs?
Sharkbite is offline  
Old November 9, 2018, 07:53 AM   #3
Mobuck
Junior member
 
Join Date: February 2, 2010
Posts: 6,847
Using Aguila SS, my 10-22 with the factory spring will run most of the time with the 10 round mag but not with a fully loaded 25 rounder--too much drag on the bolt by the rounds in the mag. What I found was that my trigger finger can "outrun" the bolt occasionally. I was on a kick of trying to get 3 bullets on the way before the first hit the 100 yard plate and maybe 50% of the attempts failed because the bolt hadn't fully closed when I triggered the next shot.
I would caution that you NOT use HV ammo with those light springs unless using a good synthetic buffer pin.
Mobuck is offline  
Old August 27, 2019, 02:53 PM   #4
MTT TL
Senior Member
 
Join Date: October 21, 2009
Location: Quadling Country
Posts: 2,671
I actually removed my buffer pin completely when I put an Archangel stock on mine. It runs like a clock even though it shouldn't. In fact it runs better than it ever did without the can. It seems to like gemtech 42gr subs.
__________________
Thus a man should endeavor to reach this high place of courage with all his heart, and, so trying, never be backward in war.
MTT TL is offline  
Old August 28, 2019, 11:36 AM   #5
TrueBlue711
Senior Member
 
Join Date: March 16, 2011
Posts: 448
Good looking setup. My 10/22 runs flawlessly with subs while my can is attached. Just with factory springs, synthetic buffer pin and the upgraded BX trigger kit. I honestly haven't tried shooting subs without the can attached though.
TrueBlue711 is offline  
Old September 13, 2019, 03:32 PM   #6
MarkA
Member
 
Join Date: January 23, 2017
Location: Central KY
Posts: 32
I've had zero issues with my bone stock 10/22 take-down running a Silencerco Sparrow. For subsonic, my LGS carries Gemtech .22LR; it's fantastic stuff. With or without the can, it feeds and shoots well.
__________________
~Mark
NRA Benefactor 2018
MarkA is offline  
Old September 14, 2019, 05:00 PM   #7
Willie Lowman
Senior Member
 
Join Date: March 5, 2009
Location: Uh-Hi-O
Posts: 2,644
I use CCI standard velocity with my .22 can on my 10/22. It functions 100% and is all factory parts.
__________________
"9mm has a very long history of being a pointy little bullet moving quickly" --Sevens
Willie Lowman is offline  
Old September 15, 2019, 09:16 PM   #8
dogtown tom
Senior Member
 
Join Date: January 23, 2006
Location: Plano, Texas
Posts: 2,479
Quote:
MarkA...For subsonic, my LGS carries Gemtech .22LR; it's fantastic stuff.
FYI, Gemtech is made by CCI.....and CCI makes quieter and cheaper subsonic ammunition.
__________________
Need a FFL in Dallas/Plano/Allen/Frisco/McKinney ? Just EMAIL me. $20 transfers ($10 for CHL, active military,police,fire or schoolteachers)

Plano, Texas...........the Gun Nut Capitol of Gun Culture, USA https://www.youtube.com/watch?v=pELwCqz2JfE
dogtown tom is offline  
Old September 16, 2019, 02:33 AM   #9
Old Stony
Senior Member
 
Join Date: May 31, 2013
Location: East Texas
Posts: 1,638
CCI subsonic is all I shoot through my suppressed 10/22, and it functions just fine and accuracy is as good as any other type through it.
Old Stony is offline  
Old September 16, 2019, 09:27 AM   #10
BillM
Senior Member
 
Join Date: January 20, 2009
Location: Amity Oregon
Posts: 683
CCI subsonic functions 100% in my 10-22 (stock springs, SBX barrel) and in my
22/45 (factory short threaded barrel, stock springs).
Aquilla is not 100% in either, but it is more accurate in my Savage FV-SR.

Going to give the new CCI Sub-Sonic CLEAN stuff a try when I get some time.
BillM is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05902 seconds with 10 queries