|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
June 27, 2012, 10:31 AM | #1 |
Member
Join Date: April 30, 2012
Posts: 23
|
CAM Gunsmitting on American Guns
Noticed will watching this show that they CAM mill receivers, frames for several diff guns, 1911, Colt Peacemaker, etc. Is there somewhere that you can purchase the P-Code for various receivers and frames or for the entire gun...
Last edited by jimwill48; June 28, 2012 at 10:34 AM. Reason: CAM Gunsmitting on American Guns |
June 27, 2012, 10:58 PM | #2 |
Senior Member
Join Date: June 14, 2004
Location: NY State
Posts: 6,575
|
That's a dumb show !! I saw a bit of it tonight .The "gunsmith " was doing a trigger job on a S&W with a DREMEL tool.
DON"T DO IT !! That's a bubba-ized trigger job !
__________________
And Watson , bring your revolver ! |
June 28, 2012, 03:20 AM | #3 |
Senior Member
Join Date: January 26, 2009
Posts: 492
|
What? Dremel and Duct tape, that's the only way to gunsmith.
To the OP, I'm sure there are places that will sell the original prints so you can input it into Pro-E, Solidworks, AutoCad, etc... then convert from there. I have never seen the code for sale but I've seen the drawings for sale. |
June 28, 2012, 07:01 AM | #4 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,838
|
What about EDM? I met a fellow who needed a frizzen for how 1803 Harper Ferry rifle. He used his workplace EDM to make it.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
June 28, 2012, 08:08 AM | #5 |
Senior Member
Join Date: October 28, 2006
Location: South Central Michigan...near
Posts: 6,501
|
CAD = Computer Assisted Drafting. CAM = Computer Assisted Machining. CNC = Computer Numerical Control.
CAD/CAM = Integrated process of designing object using CAD, converting the design to a CNC program, producing the object on a CNC machine. Last edited by dahermit; June 28, 2012 at 08:27 AM. |
July 3, 2012, 08:20 AM | #6 |
Junior member
Join Date: February 2, 2008
Posts: 3,150
|
Yup, I love to watch their "smiths" sitting at their bench and filing a part while they hold it in their hands while they have a vise on their bench that they don't seem to ever use for anything.
|
July 4, 2012, 12:33 PM | #7 |
Senior Member
Join Date: September 16, 2009
Location: I live in the foot of the Green Mountains of Vermont
Posts: 1,602
|
I'm sure the cameras , and the producers behind them have a negative effect on those gunsmiths . Just because you saw it on TV , don't make it so ! I see the show as having a positive effect on gun ownership , even though much of it is obviously staged for the cameras . Any positive light is good light . Oh and there's no denying the eye candy on that show , they are starting to import some too !
|
July 15, 2012, 03:10 PM | #8 |
Senior Member
Join Date: July 15, 2012
Location: Wonderful, Windy Wyoming
Posts: 133
|
There are sources of G/M code for various receivers and parts... but usually, someone has had to work pretty hard to create those programs and they're going to want some money for it.
If you want to create your own G/M code for a CNC machine, you could start with a dimensioned engineering drawing of what you want to machine. EDM: Yes, EDM can be used to machine gun parts. It's slower than using a lathe or mill, but it can be highly accurate. EDM is good when you want to create inside corners on something like a magazine well (eg, AR-15 receiver mag wells are often wire EDM'ed) or you want to put in a blind hole without a broach (you then use what is known as a "die sinker" EDM machine). Last edited by wyop; July 15, 2012 at 06:15 PM. |
|
|