|
September 15, 2016, 08:05 PM
|
#1 |
|
Senior Member
Join Date: March 29, 2011
Location: Cape Fear!
Posts: 1,683
|
Adjustable Butt Plate?
Can you guys recommend a good one? 3 or 4 adjustments? I have a BPS that is very close to fitting me, just need raise it a little. Also is this something I can do on my own, or do I really need to seek out a gun fitter for truly proper fit? Thanks.
|
|
|
September 15, 2016, 08:29 PM
|
#2 | |
|
Senior Member
Join Date: December 6, 2014
Posts: 6,446
|
Quote:
__________________
"I believe that people have a right to decide their own destinies; people own themselves. I also believe that, in a democracy, government exists because (and only so long as) individual citizens give it a 'temporary license to exist'—in exchange for a promise that it will behave itself. In a democracy, you own the government—it doesn't own you."- Frank Zappa |
|
|
|
|
September 15, 2016, 08:47 PM
|
#3 |
|
Senior Member
Join Date: July 26, 2011
Location: USA
Posts: 1,730
|
Morgan adjustable shotgun recoil pad
http://morganrecoilpad.com/ I have used them. Depends on your skill level when it comes to installing it. I did mine. I would not cut the stock, if at all possible. [IMG]
 [/IMG] The are flat or curved. The metal plate that goes against the wood has to be ground down. I used a sand disc in a 3/8" drill .
Last edited by 243winxb; September 15, 2016 at 08:57 PM. |
|
|
|
September 16, 2016, 11:05 PM
|
#4 |
|
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
I have one gun with one installed...it's a Jones pad.....and you can get them thru Brownell, Midway, etc....
They come with installation instructions....and you can read & evaluate whether you can do it -- or have to take it to someone. Depends on your skill & confidence level... |
|
|
|
September 17, 2016, 09:28 AM
|
#5 |
|
Senior Member
Join Date: March 29, 2011
Location: Cape Fear!
Posts: 1,683
|
Did it increase our LOP?
|
|
|
|
September 17, 2016, 11:11 AM
|
#6 |
|
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
Not necessarily ...you can vary the thickness or style of the recoil pad..
http://thefiringline.com/forums/atta...4&d=1384217534 This is a Browning Citori XT Trap ( 32" barrels ) with a GraCoil system and a Jones Pad on it. Installing the GraCoil is more complicated...of course. -------------- Actually both guns in the photo are XT's -- both 32" barrels the top one is "stock" / the bottom one is about a grade V/VI upgraded Turkish Walnut stock from Factory, that I actually bought used. Last edited by BigJimP; September 17, 2016 at 11:16 AM. |
|
|
|
September 17, 2016, 01:15 PM
|
#7 |
|
Senior Member
Join Date: March 29, 2011
Location: Cape Fear!
Posts: 1,683
|
Thanks Jim.
|
|
|
 |
|
|
