The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old November 16, 2009, 10:54 AM   #2126
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Quote:
serial number for a model 27- s 98381
1953-54; $275-$800

Quote:
pre-model 29- s 171xxx
1956-57; $400-$2000

Quote:
38 special- c 240xxx
1953; $185-$300

That should be a "pre"-27, and I've assumed that the .38 Special is a pre-10 with regard to the pricing (the other possibility would be a pre-12 "Airweight" which likely would be worth a bit more. There are so many variables involved in estimating value, particularly with older guns such as these, that I've only provided the SCSW-listed range for "fair" to "excellent" to give you an idea. I think you can safely add about 25% or more to those numbers given the increases in S&W revolver values lately. Also, the pre-29 and perhaps also the pre-27 come from the era of "Coke" stocks, and if they have them that would be a significant factor in setting the value.
FlyFish is offline  
Old November 16, 2009, 02:40 PM   #2127
dregg100
Junior Member
 
Join Date: November 16, 2009
Posts: 3
the 27 and 29 both have the coke stocks. both are also beautiful guns for their age. no rusting or pitting. no scratches etc. i used to know a great deal more about these, but have forgotten most of it. any other info would be great. thanks for the help!

also, how do i tell what type of 38 it is?
dregg100 is offline  
Old November 16, 2009, 03:13 PM   #2128
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
The pre-12 "Airweight" had an alloy frame and originally an alloy cylinder, later changed to steel due cracking problems. You can test the frame with a magnet. Value range for an Airweight would be $235 to $600 (same caveats as with previous pricing).

If the .357 and .44 have their original Cokes numbered to the gun then you're getting up into some serious money, particularly in the condition you describe (and even more so if you have the original boxes), so I'd advise you to get them properly appraised if you're considering selling. You might also want to post over on the S&W Forum, with pics if you've got any - that's where the real S&W experts hang out.
FlyFish is offline  
Old November 16, 2009, 05:14 PM   #2129
longlane
Senior Member
 
Join Date: November 13, 2009
Location: South Carolina
Posts: 162
Hard time with a .32 Long S&W

Could someone help identify this revolver? It's a S&W .32 Long. Walnut, checkered, medalion-ed grips. Small S&W logo. Pinned barrel. 6-shot. Blued. Half-circle front fixed sight. Square notched fixed rear. The gun has three screws on the right side, one on the left cylinder release, and one on the top front of the trigger guard. The barrel markings are what's messing with me. Right side, ".32 Long CTG" Left side, "Smith & Wesson"

Numbers on the gun: bottom grip (on the frame, not the grips) 605XXX this number is also visible on the inside of the cylinder swing arm [between the cylinder and the swing arm--when opened--you have to look through the cylinder with a flashlight to see it]. Same number under the barrel---also a small "v" all by itself close to where the barrel meets the frame under the barrel.

With the cylinder open, you can also see some other numbers on the frame: top line "11", second line "907XX" under this you can see a strange mark--an 8 in a circle?

I bought a blue book, but it continues to confound my attempts at verification...

The owner has had it for over 10 years.

*ANY* information would be most helpful, and many thanks in advance for any thoughts on the gun...great shooter btw...

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
longlane is offline  
Old November 16, 2009, 05:24 PM   #2130
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
longlane,

It's a post war .32 Hand Ejector (pre model 30). Serial numbers ran from 536685 in 1946 to 712953 in 1960. Yours (605XXX) dates to pre 1956.
There's actually 4 screws on the sideplate, one is hidden by the grips.

Jim
laytonj1 is offline  
Old November 16, 2009, 05:32 PM   #2131
longlane
Senior Member
 
Join Date: November 13, 2009
Location: South Carolina
Posts: 162
Thanks Jim!

It was vexing me due to the barrel markings, the "v," and the circle-8 mark. Any idea what any of these mean? Also, any ref. books you could recommend to learn more would be most appreciated. Many, many thanks!
longlane is offline  
Old November 16, 2009, 05:38 PM   #2132
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
I can't explain the V or circle 8 (although it might be buried in the book somewhere) but the other numbers are assembly markings.
The reference book for S&W is the Standard Catalog of Smith and Wesson currently on it's third edition.

Jim
laytonj1 is offline  
Old November 16, 2009, 05:41 PM   #2133
longlane
Senior Member
 
Join Date: November 13, 2009
Location: South Carolina
Posts: 162
Many thanks again

I'll have a copy before the week's out.
longlane is offline  
Old November 16, 2009, 06:19 PM   #2134
TravisBakerUSN
Junior Member
 
Join Date: November 16, 2009
Posts: 1
Looking for date/approx. value of S&W 39-2...serial: A199040. Thanks a million!
TravisBakerUSN is offline  
Old November 16, 2009, 09:24 PM   #2135
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Quote:
Looking for date/approx. value of S&W 39-2...serial: A199040.
1973-74.
SCSW lists $250 in good condition, $325 for excellent. Current value is probably a bit higher.
FlyFish is offline  
Old November 17, 2009, 02:04 AM   #2136
Sgt Pepper
Senior Member
 
Join Date: August 19, 2001
Location: Texas
Posts: 811
How about this S&W? I believe that it is a Model 1-1/2 in .32 S&W, but that's just me guessing. Serial #18932. Looks terrible, but the action and trigger are fantastic!



Sgt Pepper is offline  
Old November 17, 2009, 03:08 AM   #2137
tel0004
Member
 
Join Date: June 24, 2005
Posts: 45
Sgt. Pepper:

Looks like a model 1 1/2 to me.

The Serial numbers ran from 1-97,574, and the dates of production were 1878-1892.

The book doesn't break it down any more than that, but since your gun was made 30% into the serial numbers used, we could guess that its around the early to mid 1880's, but without a letter from S&W, its only a guess.
tel0004 is offline  
Old November 17, 2009, 11:19 AM   #2138
dregg100
Junior Member
 
Join Date: November 16, 2009
Posts: 3
Quote:
The pre-12 "Airweight" had an alloy frame and originally an alloy cylinder, later changed to steel due cracking problems. You can test the frame with a magnet. Value range for an Airweight would be $235 to $600 (same caveats as with previous pricing).

If the .357 and .44 have their original Cokes numbered to the gun then you're getting up into some serious money, particularly in the condition you describe (and even more so if you have the original boxes), so I'd advise you to get them properly appraised if you're considering selling. You might also want to post over on the S&W Forum, with pics if you've got any - that's where the real S&W experts hang out.
popped the grips off and damned if the 357 doesnt have the "numbers matching"grips to boot. the 44, i couldnt find anything. does that mean they arent original or im just looking in the wrong place?

-masin
dregg100 is offline  
Old November 17, 2009, 12:26 PM   #2139
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Quote:
does that mean they arent original or im just looking in the wrong place?
I'd assume the numbers would be in the same place as on the .357 grips, but I honestly don't know for sure - we're pretty much at the limits of my knowledge here. Maybe someone who has first-hand experience will jump in and educate both of us.
FlyFish is offline  
Old November 17, 2009, 10:23 PM   #2140
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Target style grips were not always numbered to the gun because they usually do not require much if any fitting. Magna / service grips are usually numbered to the gun because they had to be individually fitted.
If there are no numbers on your "coke" target grips they could be original or added after the fact. It would take a letter from S&W to know for sure what it orginally shipped with.

Jim
laytonj1 is offline  
Old November 18, 2009, 03:32 AM   #2141
Boomer8404
Senior Member
 
Join Date: February 3, 2007
Location: Far West Texas
Posts: 109
S&W M60-9 CCT5xxx. Please, Thanks.
Boomer8404 is offline  
Old November 18, 2009, 02:19 PM   #2142
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
S&W M60-9 CCT5xxx.
~1998.

Jim
laytonj1 is offline  
Old November 19, 2009, 08:36 AM   #2143
gyvel
Senior Member
 
Join Date: August 30, 2009
Location: Northern AZ
Posts: 7,172
Model 19-7, S/N BRW10XX??
gyvel is offline  
Old November 19, 2009, 01:17 PM   #2144
tel0004
Member
 
Join Date: June 24, 2005
Posts: 45
Quote:
Model 19-7, S/N BRW10XX??

BRFxxxx was August of 1994, so yours is probably late 1994.
tel0004 is offline  
Old November 20, 2009, 01:09 AM   #2145
ahaywood5785
Junior Member
 
Join Date: November 20, 2009
Posts: 2
k-38 Masterpiece?

I just inherited what I believe to be a K-38 Target Masterpiece. 6" Barrel, Partridge Front Sight, Non Relieved Target Grips.

The gun is 90% that I can see, very nice, have not taken it down yet. Serial Number is 743xx, with a small "4" over the fourth number and a small "3" under the second number. It was my Grandfather's gun, and in doing some research and reading many of the threads here, I am thinking it is a early 1950s gun, but I could be wrong.

Any takers?
ahaywood5785 is offline  
Old November 20, 2009, 01:47 AM   #2146
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I just inherited what I believe to be a K-38 Target Masterpiece. 6" Barrel, Partridge Front Sight, Non Relieved Target Grips.

The gun is 90% that I can see, very nice, have not taken it down yet. Serial Number is 743xx, with a small "4" over the fourth number and a small "3" under the second number. It was my Grandfather's gun, and in doing some research and reading many of the threads here, I am thinking it is a early 1950s gun, but I could be wrong.
Take the serial number from the underside of the grip butt. You will need to remove the grips to see it. It will have a "K" prefix.
BTW, it's patridge front sight.

Jim
laytonj1 is offline  
Old November 20, 2009, 06:42 PM   #2147
The Flemish
Junior Member
 
Join Date: August 6, 2006
Location: Belgium, East Flanders
Posts: 2
S&W 41

Hello,

I just got my first S&W 41.
I already own a 422, 2206, 1 1/2, 586, 686, 29 etc
Can anyone tell me when this 41 was manufactured ?
serial is BMC21XX

Thanks
The Flemish is offline  
Old November 20, 2009, 07:18 PM   #2148
The Flemish
Junior Member
 
Join Date: August 6, 2006
Location: Belgium, East Flanders
Posts: 2
and if I don't abuse

mod 422 serial TBC14xx
mod 2206 serial TEZ60xx
mod 29-2 serial 321xxx

Thanks
The Flemish is offline  
Old November 20, 2009, 09:14 PM   #2149
onebadscrambler
Member
 
Join Date: November 3, 2009
Location: Fruitland Park, FL
Posts: 36
I believe these are the dates you are looking for. I have been mistaken before.
BMC21xx-Feb 1993
TBC14xx-1987
TEZ60xx-Apr 1990
321xxx- 1975-76
onebadscrambler is offline  
Old November 21, 2009, 12:51 AM   #2150
che
Junior Member
 
Join Date: November 21, 2009
Posts: 6
I have a s&w 38 special ctg that has flowers all over, used to belong to my grandfather, before he die he left me that gun, I enjoy the art this gun has. It has about 6in barrel, like shooting target site and gold points on it. And on the butt of the revolver has a number that starts with K 160793. I can shoot so accurate with this gun like my rifle 22 marlin. Whitch surprises me. I would like to know more about this gun and how much can be worth. Please forgive my english since is really poor..
che is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.76652 seconds with 9 queries