The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old October 15, 2008, 08:54 PM   #526
carguychris
Senior Member
 
Join Date: October 20, 2007
Location: Richardson, TX
Posts: 7,523
Quote:
1) Does the gun have an intertwined-"S&W" logo on it?
Yes on the handle.

2) Do you load and unload the gun by pressing a latch on the side, which makes the cylinder swing out to the left?
No

3) If not, I assume that you load and unload the gun by squeezing two buttons on the top rear of the gun,
No buttons there is a lever on top, in front of the trigger, you lift up that makes the barrel hinge down and cylinder hinge up.
I assume that it is still considered a top break.
Does it have a visible hammer? yes

4) If so, does it have a trigger guard (loop of metal around the trigger), and does the hammer move backwards by itself when the trigger is pulled? These two features should normally coincide.
Yes
OK, my explanation of how to open a top-break wasn't very accurate, but anyways...

It's a .32 Double Action 3rd Model, manufactured 1882-1883.
carguychris is offline  
Old October 16, 2008, 04:21 PM   #527
pepsquad
Senior Member
 
Join Date: November 15, 2004
Posts: 108
model 10

478XXX

poor thing is a beater, maybe i'll get a two inch barrel for it and call it my carry gun.
pepsquad is offline  
Old October 16, 2008, 10:13 PM   #528
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
478XXX
"C" or "D" prefix? C478XXX would be 1961 and D478XXX would be 1972/73.

Jim
laytonj1 is offline  
Old October 16, 2008, 11:06 PM   #529
pepsquad
Senior Member
 
Join Date: November 15, 2004
Posts: 108
no letter prefix. i am confused i thought this thing was a model ten. huh
pepsquad is offline  
Old October 16, 2008, 11:12 PM   #530
pepsquad
Senior Member
 
Join Date: November 15, 2004
Posts: 108
pepsquad is offline  
Old October 17, 2008, 01:14 AM   #531
AZAK
Senior Member
 
Join Date: May 15, 2008
Location: the object towards which the action of the sea is directed
Posts: 2,123
How about a S&W M 60-7 BSD7XXX?

And what does the -7 denote in change from previous?

Thanks in advance!!!

Also what about +P in this vintage?
AZAK is offline  
Old October 17, 2008, 09:40 AM   #532
carguychris
Senior Member
 
Join Date: October 20, 2007
Location: Richardson, TX
Posts: 7,523
Quote:
no letter prefix. i am confused i thought this thing was a model ten. huh
Based on your picture, it's a 1930s-vintage .38 Military & Police Model of 1905, 4th Change. It's the predecessor to the Model 10.

See my earlier note about keeping +P ammo far, far away from this gun...
Quote:
poor thing is a beater, maybe i'll get a two inch barrel for it and call it my carry gun.
NO!! STOP!!! It looks like it's in pretty good original condition for a 4th Change! Yeah, the finish is worn, but it's not too bad. Too many Model of 1905s have already been turned into "gun show specials" when someone flippantly hacked the barrel- PLEASE don't create another one!

If you must hack up an M&P, please choose a 4" tapered barrel C- or D-prefix Model 10... they're plentiful. If cash is short, I'm sure you can find a knowledgeable collector who will buy this nice old 4th Change from you for more than what that Model 10 will cost. I'd make an offer but I just emptied my cookie jar to buy a Lee-Enfield No.4 MkI.

{EDIT} BTW the gun appears C&R eligible based on the serial number; the only question is whether or not it's been modified. If it's C&R, you can legally sell it to an out-of-state C&R FFL, and you're allowed to ship it to them. Please post more pictures so we can check it out.
carguychris is offline  
Old October 17, 2008, 10:09 AM   #533
pepsquad
Senior Member
 
Join Date: November 15, 2004
Posts: 108
I'll create a different thread so i don't clog this one up, however the front sight has been ground down to almost nothing. I'm going to take it out this weekend and see if i can hit anything with that strange sight.
pepsquad is offline  
Old October 17, 2008, 02:56 PM   #534
tonelar
Member
 
Join Date: December 29, 2007
Location: Texas
Posts: 26
Hi y'all,

The only S&W I own that Im blank on its origins is a 3rd change 29 with serial # ALB8xxx. Anyone have the reference book handy?

Thanks much.
tony
tonelar is offline  
Old October 17, 2008, 03:37 PM   #535
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
How about a S&W M 60-7 BSD7XXX?
And what does the -7 denote in change from previous?
Thanks in advance!!!
Also what about +P in this vintage?
1994/95. The dash numbers refer to engineering changes. -7 was started in 1990 increasing the front sight width to 1/8" and a new heat treating package.
Though not specifically rated for +P, being all steel it is safe to use it.

Quote:
The only S&W I own that Im blank on its origins is a 3rd change 29 with serial # ALB8xxx. Anyone have the reference book handy?
Your 29-3 was made in 1985.

Jim
laytonj1 is offline  
Old October 17, 2008, 03:41 PM   #536
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
no letter prefix. i am confused i thought this thing was a model ten. huh
You were on the right track, they did not become known as model 10's until 1958. As Carguychris said, your picture shows a Military and Police pre war.

Jim
laytonj1 is offline  
Old October 17, 2008, 04:11 PM   #537
tonelar
Member
 
Join Date: December 29, 2007
Location: Texas
Posts: 26
Thanks Jim,
Here's a picture;
tonelar is offline  
Old October 17, 2008, 04:26 PM   #538
NavionPilot
Junior Member
 
Join Date: August 19, 2008
Posts: 2
Any idea on the age of a S&W 34-1 with 2" barrell, SN M514xx?

It is in very good shape, ball park on the value?

Thanks!

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
NavionPilot is offline  
Old October 17, 2008, 04:42 PM   #539
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Any idea on the age of a S&W 34-1 with 2" barrell, SN M514xx?
It is in very good shape, ball park on the value?
1972/73. I'm not sure on a value but I know the 34's are desireable to S&W collectors. I would guess ~$400.

Quote:
Thanks Jim,
Here's a picture;
Wow, and a 3" at that! That's nice.

Jim
laytonj1 is offline  
Old October 17, 2008, 08:41 PM   #540
NavionPilot
Junior Member
 
Join Date: August 19, 2008
Posts: 2
Thanks Jim!
NavionPilot is offline  
Old October 18, 2008, 02:40 AM   #541
AZAK
Senior Member
 
Join Date: May 15, 2008
Location: the object towards which the action of the sea is directed
Posts: 2,123
And another thank you to you Jim!
Much appreciated.
AZAK is offline  
Old October 18, 2008, 03:22 PM   #542
range_rider13
Member
 
Join Date: July 10, 2007
Location: Tex-Mex Border
Posts: 38
Model 36 Born On Date?

a) .38 Special
b) 1 7/8" bbl
c) Round butt
d) 5 shot
e) Fixed
f) Serial #J88xxxx
g) Mod. 36
__________________
"If you climb into the saddle be ready for the ride!"
range_rider13 is offline  
Old October 18, 2008, 03:36 PM   #543
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
f) Serial #J88xxxx
1981.

Jim
laytonj1 is offline  
Old October 18, 2008, 03:41 PM   #544
SteelyNirvana
Member
 
Join Date: December 30, 2006
Posts: 43
Model 66

I have an 4" model 66 serial # 4K505** I think it was made around '74 but not sure.
SteelyNirvana is offline  
Old October 18, 2008, 04:40 PM   #545
range_rider13
Member
 
Join Date: July 10, 2007
Location: Tex-Mex Border
Posts: 38
Model 36 Born On Date?

Thanks Jim. Any idea what month in 1981?
__________________
"If you climb into the saddle be ready for the ride!"
range_rider13 is offline  
Old October 18, 2008, 06:05 PM   #546
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Any idea what month in 1981?
This is as close as the book gets: 1981 = J760001 - J915400.

Quote:
I have an 4" model 66 serial # 4K505** I think it was made around '74 but not sure.
Your close: 4K1628 – 4K54104 = 1973.

Jim
laytonj1 is offline  
Old October 18, 2008, 06:25 PM   #547
range_rider13
Member
 
Join Date: July 10, 2007
Location: Tex-Mex Border
Posts: 38
Model 36 Born On Date?

Ok Jim, thanks! I'm thinkin' around October. Have a good day.
__________________
"If you climb into the saddle be ready for the ride!"
range_rider13 is offline  
Old October 19, 2008, 04:01 PM   #548
Morgan Buchanan
Junior Member
 
Join Date: October 19, 2008
Location: Dallas, TX
Posts: 2
I have a Model 29, N399xxx. Would love to know when it was manufactured!
Morgan Buchanan is offline  
Old October 19, 2008, 05:41 PM   #549
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I have a Model 29, N399xxx. Would love to know when it was manufactured!
1976.

Jim
laytonj1 is offline  
Old October 19, 2008, 10:53 PM   #550
Morgan Buchanan
Junior Member
 
Join Date: October 19, 2008
Location: Dallas, TX
Posts: 2
Holy cow, that's older than I'd have guessed. I bought it in about 1991 or 1992, and would have only figured it for a couple years old. The years have been very kind to my nickle plated beauty. Thanks for the info, neighbor.



Last edited by Morgan Buchanan; October 20, 2008 at 05:32 AM.
Morgan Buchanan is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:40 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.47572 seconds with 9 queries