The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old July 28, 2011, 10:16 PM   #1
Civil War Life
Senior Member
 
Join Date: January 15, 2011
Location: Virginia
Posts: 166
Accurate bullet for M-4

I am looking for an accurate bullet for my M-4 carbine. Looking for a 55 grain FMJBT with a crimping groove. I checked the reviews on all the bullets offered by Midway and they all sound pretty bad, variances in diameter and weight. Any suggestions would be welcome.

Thanks
Civil War Life is offline  
Old July 28, 2011, 10:26 PM   #2
mehavey
Senior Member
 
Join Date: June 17, 2010
Location: Virginia
Posts: 6,869
Why do you want a crimping groove?
(Why do you think you'll need to crimp?)

Either way, put a Sierra 55 FMJBT #1355 in it--no crimp--and call it a day.


http://www.midwayusa.com/viewProduct...tNumber=156671
mehavey is offline  
Old July 28, 2011, 11:03 PM   #3
me26245
Member
 
Join Date: April 3, 2008
Location: midwest
Posts: 42
Twist Rate

Depending on the barrel twist rate you should be able to use any bullet weight from 45gr to 77gr.

1 in 9 twist rate, bullets between 45-62gr should work well, however the 62gr bullets may not stabalize fully.

1 in 7 twist rate, will work better with bullets from 55-77gr with bullets 62gr and heavier working better.

Even if your bullets don't have a cannalur (crimp groove) you need to put a good crimp on reloads to prevent bullet setback, which could cause a over-pressure problem.

If your reloading for a bolt gun crimping is not as critical and may not even be required.
me26245 is offline  
Old July 28, 2011, 11:28 PM   #4
kraigwy
Senior Member
 
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
I've loaded I don't know how many thousands of 223s I loaded over the last 40 years and I have yet to crimp, or need to put a crimp on a 223 bullet.

As far as what's the best bullet for your gun, you have to know the twist, faster twist will shoot lighther bullets better then a slower twist will shoot heavy bullets.

Best thing, pick the weight (actually length) that matches your twist, then buy as many different kinds as possible and find one that fits your gun.

I could tell you what works in my guns, but it would mean nothing, you're not loading for my guns.
__________________
Kraig Stuart
CPT USAR Ret
USAMU Sniper School
Distinguished Rifle Badge 1071
kraigwy is offline  
Old July 29, 2011, 12:43 AM   #5
Jim243
Senior Member
 
Join Date: January 5, 2009
Location: Just off Route 66
Posts: 5,067
Hornady or Sierra 53 or 52 grain match hollow points will be the most accurate and it won't mater what you twist rate is they will stablize with a 1:14, 1:12, 1:9 or 1:8 twist rate.

Jim
__________________
Si vis pacem, para bellum
Jim243 is offline  
Old July 29, 2011, 07:23 AM   #6
wingman
Senior Member
 
Join Date: August 20, 2002
Posts: 2,108
Quote:
Hornady or Sierra 53 or 52 grain match hollow points will be the most accurate and it won't mater what you twist rate is they will stablize with a 1:14, 1:12, 1:9 or 1:8 twist rate.
Correct, I've found the 52-53 range match bullets in a 223 consistently are more accurate in my rifles including my AR however I only target shoot mostly slow fire. I don't crimp but if I loaded large quantities(223) for storage or rapid fire I would crimp and would use a 55gr with groove to prevent setback.
wingman is offline  
Old July 29, 2011, 07:53 AM   #7
farmerboy
Junior member
 
Join Date: May 16, 2009
Location: Central Texas
Posts: 1,343
plus one for KRAIGWY's post
farmerboy is offline  
Old July 31, 2011, 10:42 AM   #8
Marquezj16
Senior Member
 
Join Date: April 3, 2011
Posts: 2,088
Acceptable Accuracy, what's your target?

FMJ = bulk shooting
BTHP = bench rest shooting
V-Max/A-Max or anything that is special tip = hunting
SP = hunting

At least that's what I read.
Marquezj16 is offline  
Old July 31, 2011, 12:43 PM   #9
m&p45acp10+1
Senior Member
 
Join Date: May 3, 2009
Location: Central Texas
Posts: 3,930
The priemier accuracy that I have attained from .223 in AR Platformed rifles. Twist varied from 1 in 7 to a 1 in 14, and all of the inbetweens. Has been a 55 grain Hornady V-Max. That bullet gave the best groups with a wide variety of powders in mixed cases with which ever primers I could find. Next in line behind that is 55 grain FMJBT Winchester. Cheap, and effective. No they do not give the accuracy that the VMax do. Though they get fairly close for about 30% less in cost
__________________
No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.
m&p45acp10+1 is offline  
Old July 31, 2011, 08:50 PM   #10
CherokeeT
Senior Member
 
Join Date: April 23, 2008
Location: Medina, Ohio
Posts: 273
Experiences do vary - the best 55 gr bullet I have found, since loading for 223 from 1976 forward, is the Hornady 55 JSP, followed closely by their 55 FMJ. The Winchester 55 FMJ was poor. The 52-53 gr match bullets are also good but don't beat the 55 JSP in my AR's or Mini-14. Majority of my loads are with H335 or AA2230.
__________________
God Bless America
US Army, NRA Endowment
TSRA Life, SASS
CherokeeT is offline  
Old August 1, 2011, 01:02 PM   #11
slugcatcher
Junior Member
 
Join Date: April 27, 2010
Location: Texas
Posts: 14
I've had surprisingly good luck with 55g Remington PLHP. 1" groups @ 100yds in my 16", 1/7 twist m4gery. 1/4" groups at 100yds with my 20" 1/8 heavy barreled AR. And I do crimp. I've had too many problems with uncrimped bullets getting pushed back in to the case. Luckily they caused feeding problems and didn't make it into the chamber.
slugcatcher is offline  
Old August 1, 2011, 08:51 PM   #12
fredneck
Senior Member
 
Join Date: October 20, 2007
Location: Old Dominion
Posts: 136
Hornady, Sierra, and Speer 55 FMJ shoot quite well in mine. Stay away from Armscor.

Remington and Winchester can be a little spotty too in construction but are generally OK too. Sierra the best IMO across the board...for accuracy anyway. 69 grain match is the bomb.
fredneck is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.08900 seconds with 10 queries