November 17, 2002, 04:39 AM | #1 |
Senior Member
Join Date: September 22, 2000
Location: Northern Michigan
Posts: 2,945
|
Need a pump shotgun
As much as I love the Boomstick, I need a new repeating shotgun. I'm probably going to get a Remington 870. I don't like the safety (I'm left handed), but it's available in the configuration that I want (18" bbl, 7+1 cap). I like a parkerized finish. Should I just go all the way and get the 870 Police Model? Price range?
Also, I'd want to add a sidesaddle. Recommended brands? I'm probably going to get an aftermarket heatshield too. Just for looks, you understand. THey cost like $20.00 anyway. Finally, the big question. I'd like to think I'd be able to hit stuff with slugs. In my experience I'm a notoriously poor shot with slugs and a bead sight. I'm thinking I should get the rifle sights or the ghost ring sights. (I can cut a hole in my cheap aftermarket heat shield to make room for rifle sights, like one other TFLer did). I'm not sure. The apreture sight might be better, but to my eyes apreture sights aren't very good in low light conditions (like you often encounter indoors). In fact, a bead sight might be best for that reason. Also, I find that for some reason the length of pull on a number of defense pumpguns feels too long for me. Does somebody make a shorter stock for the Remington 870? Doesn't have to be a whole lot shorter, just a bit. Hmm. Advice?
__________________
Nightcrawler- TFL Alumnus |
November 17, 2002, 06:21 AM | #2 |
Staff In Memoriam
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,811
|
Eyes vary, but most people find aperture sights work very well in low light.
Hogue makes a shorter stock for the 870, but any smith or fair to middlin' amateur can shorten a stock and mount a pad. HTH.... |
November 17, 2002, 06:22 AM | #3 | |
Senior Member
Join Date: September 22, 2000
Location: Northern Michigan
Posts: 2,945
|
Quote:
I wish some shop around here would actually STOCK a shotgun with a peep sight so I could try before buying.
__________________
Nightcrawler- TFL Alumnus |
|
November 17, 2002, 06:31 AM | #4 |
Staff In Memoriam
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,811
|
Shotgun apertures are larger, and the hole left when the peep is unscrewed is larger yet. That's the original GR sight.
|
November 17, 2002, 09:15 AM | #5 |
Senior Member
Join Date: June 9, 2001
Location: Lafayette, Indiana--American-occupied America
Posts: 5,418
|
Nightcrawler, I thought that was what buddies (and gun shows) were for?
__________________
"Arguments of policy must give way to a constitutional command." Payton v. New York, 445 U.S. 573, 602 (1980). |
November 17, 2002, 02:26 PM | #6 |
Senior Member
Join Date: September 22, 2000
Location: Northern Michigan
Posts: 2,945
|
Gun show? What's that?
All the big ones are down state, I'm afraid. As for buddies? Heh. One has a Mossberg 500 with a bead sight, 6-shot model. The other has a Mossberg 500A, 8 shot, with a bead sight.
__________________
Nightcrawler- TFL Alumnus |
November 22, 2002, 02:54 AM | #7 |
Member
Join Date: August 26, 2002
Location: Colorado
Posts: 31
|
You might want to check with a gunsmith, I believe that the crossbolt safety on the 870 can be reversed. The trick is, I don't know if that applies to the new ones that have the internal lock in the safety, and of course it confuses anyone that you hand your shotgun to...
|
November 22, 2002, 09:57 AM | #8 |
Senior Member
Join Date: May 26, 2002
Location: Baton Rouge, LA
Posts: 297
|
You might want to take a look at the Mossberg 590A1 guns. you can get them from the factory with a short stock, ghost rings, & QD sling points for a price that's pretty comparable to the Reminginto Police 870s. And the safeties are ambi. Remember that the safety button and trigger guard on the A1s are metal, not the plastic that you're seeing on you buddies 500s.
__________________
"Not only do these people reach erroneous conclusions and make unfortunate choices, but their incompetence robs them of the metacognitive ability to realize it." --Kruger & Dunning |
November 22, 2002, 10:24 AM | #9 |
Senior Member
Join Date: September 22, 2000
Location: Northern Michigan
Posts: 2,945
|
I handled a 590A1 once. Granted, it had a bayonet mounted on it at the time, but it struck me as muzzle heavy.
__________________
Nightcrawler- TFL Alumnus |
November 22, 2002, 04:07 PM | #10 |
Junior Member
Join Date: November 22, 2002
Posts: 4
|
Nightcrawler; I have a Remington 1187 'Police' auto that I keep for the same reasons you want a 18" pump, and it's a sweet one. Parkerized, sights, mag extension and a Choate pistol grip stock with matching forend. What do you plan on loading it with for home defense? I used to keep 00 buck in mine, but have switched to #8 low brass. At 50' or less, it'll do the job and is a lot less prone to go through walls. This thing will rattle off 8 rounds PDQ!
|
November 22, 2002, 05:39 PM | #11 |
Member
Join Date: October 27, 2001
Posts: 77
|
191145, You may have an illegal setup on that Shotgun, I think You have too many evil features on that 1187P. I would lose the Pistol grip stock to get away from the Brady violation. Can any one else confirm my concern here? I also have an 1187P With a mag extension, I thought adding a pistol grip stock to a semi-auto would violate the Brady Act. Al in Md.
__________________
The Peoples Republic of Maryland, #1 Robbery Rate in the Nation and all we get is more gun laws. |
November 22, 2002, 06:01 PM | #12 |
Senior Member
Join Date: June 5, 2002
Location: Bakersfield, Kommiefornia
Posts: 549
|
try the mossberg 500 persuader that Big 5 runs on special every month or so. It's a 20 inch 7+1 and it's prettty slick. it's lighter than a 590, IIRC and balances between the hands.
|
November 22, 2002, 10:10 PM | #13 |
Senior Member
Join Date: September 22, 2000
Location: Northern Michigan
Posts: 2,945
|
I've seen 500A Persuaders in Shotgun News for $200. They come with pistol grip only stocks, but it wouldn't be a big deal to buy a stock from Mossberg and slap it on there.
It wouldnt' have any iron sights, save the bead, but it'd still work well enough for my purposes, most likely. As for the auto. A semiautomatic shotgun can not have a pistol grip if the magazine tube holds more than five rounds. If your magazine tube holds five rounds or less, you're good on the pistol grip stock.
__________________
Nightcrawler- TFL Alumnus |
November 22, 2002, 10:56 PM | #14 | |
Senior Member
Join Date: December 27, 1999
Location: Massachusetts
Posts: 358
|
Quote:
|
|
November 24, 2002, 10:08 PM | #15 |
Junior Member
Join Date: November 22, 2002
Posts: 4
|
Al in MD: Why would you be concerned about my shotgun? FYI, the gun was several years old in 1994. I added nothing to it - that's the way it came to me. Anyway, I'm not selling it or carrying it around, so I really don't give a hoot about Brady.
|
November 25, 2002, 12:02 AM | #16 |
Member
Join Date: October 27, 2001
Posts: 77
|
191145, Glad to see your 1187P is preban. Sure would like this Brady Bill to sunset. I was trying to point out that that you could have a problem if you added a PG stock to a your semiauto shotty if postban. This is just the kind of trap that has been set by the Brady bill for the unknowing. Obviously you are fully aware of the Brady requirements. Notice in my post I used the word "may" to describe a possible violation. If I had modified a shotgun and was in violation of some ignorant law I would rather have a TFL member point that out than some LE officer. I don't give a hoot about Brady myself but the range that I shoot at has a number of LE types as members. Al in Md
__________________
The Peoples Republic of Maryland, #1 Robbery Rate in the Nation and all we get is more gun laws. |
November 25, 2002, 08:18 AM | #17 |
Staff Alumnus
Join Date: May 2, 1999
Location: South Carolina
Posts: 3,611
|
191145, that's called watching out for one another. It's what we gun folks need to do for each other.
Thanks Al !
__________________
http://www.scfirearms.org/ |
November 28, 2002, 07:42 AM | #18 |
Senior Member
Join Date: January 8, 2000
Posts: 111
|
Haven't I read somewhere that you have to be able to prove that the gun was in pre-ban configuration prior to Brady's taking effect? For example, if you have a pre-ban AR lower, don't you have to provide some documentation that it as assembled as a pre-ban gun before Brady?
|
|
|