|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
July 30, 2014, 08:29 AM | #6626 |
Member
Join Date: June 11, 2011
Posts: 68
|
Thanks Sevens!! I don't have the guns in front of me at work, but I'm pretty sure it doesn't have the diamond inserts.
|
July 30, 2014, 12:45 PM | #6627 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
|
They are desirable simply because Smith & Wesson discontinued them, but no big deal either way.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
August 3, 2014, 05:10 PM | #6628 |
Junior Member
Join Date: January 24, 2010
Location: Ecru, Mississippi
Posts: 3
|
Just back from an estate sale....picked up a .32 Long revolver, 6 shot, DA. Butt says Ø6107 and frame/yoke says 44728. is nickel plated, and could use some TLC to the plating. Would someone mind giving me some insight as to what it is, and if $60 was a good price?
|
August 5, 2014, 07:57 PM | #6629 |
Member
Join Date: October 4, 2004
Location: SW Idaho
Posts: 20
|
I just picked up one my Wife has asked about a couple of times. It's a 32 S&W Long in a 30-1 # H40xxx in nice shape with just some apparent holster wear on muzzle and cylinder front.
Anybody have an idea when it was made? |
August 5, 2014, 08:04 PM | #6630 | ||
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
|
Quote:
At this point, if it seems functional, not falling apart and the cylinder turns when cocked.... ...without knowing ANYTHING else, if it's a Smith & Wesson, it is certainly worth the $60 you spent, and more. Quote:
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
||
August 6, 2014, 07:25 PM | #6631 |
Member
Join Date: October 4, 2004
Location: SW Idaho
Posts: 20
|
Thanks Sevens. I have so few S&W's, and little chance of obtaining more anytime soon, that getting the book just doesn't make fiscal sense.
I wonder if the Library has a copy, I'm guessing they don't but I think I'll check. Thanks again for the information. |
August 7, 2014, 01:31 PM | #6632 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
|
If the budget strings are pulled so tightly that you fear damage to the fingers, I certainly understand. But please know that this book is far, FAR more valuable than looking up a few serial numbers. There's an almost irrational amount of quality, interesting detail in it and piles of pictures. You can open it up to almost any page and just read for pleasure.
My mouth waters at the hope & prospect of a new edition of this book!
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
August 10, 2014, 03:04 AM | #6633 |
Senior Member
Join Date: May 6, 2005
Location: North Chesterfield, Virginia
Posts: 4,777
|
K-Frame hand ejector, 6" barrel, fixed sights, six shots, 38 special, single line address (Made in USA), S/N 678690.
__________________
For God so loved the world, that He gave His only begotten Son, that whoever believes in Him should not perish, but have everlasting life. John 3:16 (NKJV) |
August 10, 2014, 07:40 AM | #6634 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
|
That's another one that falls in to the H-U-G-E serial number range between the start of the 4th Change guns (1915) and the last of production before the Victory model. The table in the book only tells us that your revolver is near the very end of that, with 1941/42 being "likely."
Best way to know is the factory letter. Second best way to know is to scour forum pages and auction/sale pages for a revolver with a similar serial number that does have a factory letter, and find out when it was shipped. Sorry.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
August 11, 2014, 04:19 AM | #6635 |
Senior Member
Join Date: May 6, 2005
Location: North Chesterfield, Virginia
Posts: 4,777
|
Thanks Sevens. That's close enough for me.
__________________
For God so loved the world, that He gave His only begotten Son, that whoever believes in Him should not perish, but have everlasting life. John 3:16 (NKJV) |
August 11, 2014, 07:26 PM | #6636 |
Junior Member
Join Date: August 11, 2014
Posts: 2
|
model 65 357
picked at the range today a nice model 65-5 357 6 shooter stainless 3 inch very nice
BCAXXXX any idea when it was made thanks Last edited by walterppk; August 11, 2014 at 10:58 PM. Reason: model number |
August 12, 2014, 04:12 AM | #6637 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
|
Smith & Wesson got goofy with the three letter prefix serial numbers and did many letters out of order. My best guess on the BCAxxx when I look at the table is that it's a late 1988 or an early 1989.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
August 12, 2014, 09:00 AM | #6638 |
Junior Member
Join Date: August 11, 2014
Posts: 2
|
thanks sevens
thanks sevens
|
August 13, 2014, 06:43 AM | #6639 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
How about a date for what I believe is a Model 4? 76XXX is the S/N.
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
August 13, 2014, 01:36 PM | #6640 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
|
Please give more information. I don't recognize a "Model 4"
What's the caliber? Describe the handgun?
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
August 13, 2014, 02:23 PM | #6641 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
caliber is a.32 S&W. The gun is a top break revolver, nickle plated with engraving.
Perhaps this old thread with pictures will help? http://thefiringline.com/forums/showthread.php?t=517253 I guess I should has stated it is a 4th model as opposed to a model 4. Not being a S&W guy, all I can say is "OOPS!"
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy Last edited by CowTowner; August 13, 2014 at 02:40 PM. |
August 13, 2014, 02:40 PM | #6642 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
|
That is extremely cool!
The 3rd post in that thread you linked by James K has all the answer that my book has. You'd need a S&W factory letter from Roy Jinks to glean more. The factory letter will cost you $50 and will take 6-8 weeks to get. It'll give you a brief history on the model, it will tell you where it was originally shipped for sale and it'll tell you how the revolver left the factory, including the engraving. Nice revolver! Not a "Model 4" but rather a ".32 Double Action 4th Model"
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
August 15, 2014, 08:07 AM | #6643 |
Junior Member
Join Date: December 12, 2009
Posts: 4
|
I have a S&W .38 Special round butt #227057
What year, model and frame is this. Thank you! |
August 15, 2014, 02:42 PM | #6644 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
|
That's not enough information for me to be sure of what you have, and that you describe it as a "round butt" muddys the water even more.
That serial number could fit in at least two different .38 cal models... It could be a .38 Safety Hammerless 5th Model, the number putting it's manufacture somewhere in the 1910-1920 range. That would be a top-break revolver. A picture or more information would help.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
August 17, 2014, 10:29 AM | #6645 |
Junior Member
Join Date: August 16, 2014
Posts: 1
|
model 57 no dash
I just purchased a used model 57 blued 6 shot six inch .41 magnum revolver. The serial is n477xxx. Wondering when it was made and possible value. The bluing is probably 95+ percent and has a few handling marks.
Any help would be greatly appreciated. Last edited by blyytinen; August 17, 2014 at 04:04 PM. Reason: added pics |
August 17, 2014, 02:26 PM | #6646 |
Junior Member
Join Date: December 12, 2009
Posts: 4
|
Thank you for taking the time to research my S&W revolver.
I'm not sure what model, year, or frame type it is. I've included two photos along with what's stamped on it. Any help would be appreciated. Under the grips on the base of the butt serial#227057 On the cylinder serial#227057 Under the barrel serial#B 227057 On the crane Serial#5696 Stamped on the barrel, Smith&Wesson Springfield Mass USA Patd March 22,96.May.21.95. Aug 4.96 Dec 22, 96. Oct.8.01 Dec.17.01 Feb.6.06. Sep.14.09 On each side of the barrel stamping there are two Maltese crosses. |
August 17, 2014, 10:05 PM | #6647 | |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
|
Quote:
The wood stocks on it now are not the original grips, those are far more modern. This revolver evolved in to the Victory Model and eventually, the Model 10. It is a K-frame, and the most produced single model of handgun... ever!
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
|
August 17, 2014, 10:11 PM | #6648 | |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
|
Quote:
Value is wild animal, especially on a .41 Magnum. Definitely a less-traded Smith & Wesson revolver, and many dealers would look at it that way. They'd be less inclined to want to take it in as it might be more difficult to sell. However, that's a two-way street, as .41 Magnum fans simply KNOW they don't have a lot of guns to choose from, and they might pay a premium to get it. So value would be generally difficult to assess, but if I have to take a wild stab in the dark given what I've seen at the many gun shows I've attended, I would imagine $800 is somewhere in the ballpark. Running a number of searches on Gunbroker over a period of time is another way to get an idea of "value," and the closed & SOLD auctions are far more informative than the ones with crazy prices and zero bidders.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
|
August 18, 2014, 11:24 PM | #6649 |
Senior Member
Join Date: November 18, 2007
Location: Tuscaloosa, AL
Posts: 479
|
|
August 19, 2014, 01:59 PM | #6650 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
|
I happen to have a six-inch Model 66 with the AVBxxx serial number and ours are of the same production cycle, most likely 1987.
The table for serial numbers in that era is a little wacky with some numbers a bit out of order, but either very late '86 or early 1987 seems most likely. Yours is in far, FAR better condition than is mine, I was able to get mine for a song because of it's condition, but it's a fantastic shooter and I'm thrilled to own it.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
Tags |
s&w 686 |
Thread Tools | Search this Thread |
|
|