|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
May 27, 2010, 04:24 PM | #1 |
Senior Member
Join Date: August 23, 2008
Location: SoCal
Posts: 6,442
|
Cylinder Loading Press that's different
Wishing to try conical bullets in my replica Remington without cutting away some of the frame, a separate cylinder loading press seemed like a simple solution. The available basic loaders are of the lever and ram variety. They don't have a toggle link and guide (to provide parallel action) as is found in the revolver's loading assembly.
HisSoldier made a very nice toggle link loader (similar to the Triple-P unit); but, he has the advantage of a computer controlled machine shop. Having only a saw and a drill, I set out to design something I could build with my limited capabilities. From red oak, with a 6-to-1 ratio and a 2-inch stroke, I finished them last night: |
May 27, 2010, 04:29 PM | #2 |
Junior member
Join Date: April 1, 2010
Location: Louisiana - Cajun Triangle
Posts: 223
|
Superior
Really nice photos, looks pro all the way around !
|
May 27, 2010, 06:00 PM | #3 |
Junior member
Join Date: November 2, 2006
Posts: 908
|
Wow! Those look REALLY nice!
|
May 27, 2010, 06:23 PM | #4 |
Senior Member
Join Date: August 9, 2007
Location: Oregoncoast
Posts: 1,793
|
Very nice, did you find the leverage sufficient?
Looks like a simple wood block that slips on the axis pin would convert it into a nut cracker, dual use.
__________________
CNC produced 416 stainless triggers to replace the plastic triggers on Colt Mustangs, Mustang Plus II's, MK IV Government .380's and Sig P238's and P938's. Plus Colt Mustang hardened 416 guide rods, and Llama .32 and .380 recoil spring buttons, checkered nicely and blued. |
May 27, 2010, 08:12 PM | #5 |
Senior Member
Join Date: August 23, 2008
Location: SoCal
Posts: 6,442
|
HisSoldier,
Don't know about the leverage, yet -- I'll find out tomorrow at the range. I can always make a longer handle. Edit (later): It worked fine -- the leverage seems spot on. You're right about the nutcracker. It could also be converted to a wad cutting punch, too. Just after I finished putting the concavity into the ram face, I realized that it could have made to accept a standard Lyman lubricator/sizer top punch. Last edited by zippy13; May 28, 2010 at 08:58 PM. Reason: report field results |
May 28, 2010, 06:44 AM | #6 |
Senior Member
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,923
|
WOW! Nice work, I could never do that, they would have blood stains everywhere.
|
May 28, 2010, 07:21 AM | #7 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Zippy
Very very nice.
Perhaps you know that I am on a self imposed quest for a small loading press and have been as yet only moderately successful. Your press is a thing of beauty as well as utility. Tnx,
__________________
Seek truth. Relax. Take a breath. |
May 28, 2010, 11:06 AM | #8 |
Senior Member
Join Date: August 23, 2008
Location: SoCal
Posts: 6,442
|
Doc,
Yes, I'm very familiar with your efforts. I pondered a screw press; but, I agree with you, it's too slow and provides more mechanical advantage than needed. Your latest lever press seems to be an elegant solution based on your design requirements. Since I go to the range with a veritable baggage train, a compact size wasn't one of my requirements. That doesn't mean I wasn't thinking about your efforts: Had I dovetailed the column to the base, instead if screwing from below, then my unit could be knocked down. But, since I'm not a proficient dovetailer, I passed on that idea. |
May 28, 2010, 11:28 AM | #9 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Nonetheless....
....the presses you made are exquisite.
__________________
Seek truth. Relax. Take a breath. |
May 28, 2010, 12:11 PM | #10 |
Member
Join Date: April 20, 2010
Location: Middle TN
Posts: 22
|
How much do you want for one?
|
May 28, 2010, 04:51 PM | #11 |
Senior Member
Join Date: March 2, 2009
Location: Orlando
Posts: 936
|
It never ceases to amaze me how imaginative, creative, and talented a good number of folks are on this forum. Great job zippy!
|
May 29, 2010, 03:01 AM | #12 |
Senior Member
Join Date: February 24, 2009
Location: Arizona
Posts: 877
|
Those are just lovely and I agree that you could easily sell them they're so nice. Well done!
Oly |
May 29, 2010, 03:12 AM | #13 |
Junior member
Join Date: April 1, 2010
Location: Louisiana - Cajun Triangle
Posts: 223
|
Stand Alone Beauty
Zee, presses, zay air zo byooteeful ...
zay mast stand alone in zee peektchers ... zee pistole ... can send to meee ... no problemo ... we must not have zee peektcher cluttered with such stuff ... onlay zee presses ... for me ... the burden ... the revolvair ... OUI ! ovair zee night to MOI ! |
May 29, 2010, 10:41 AM | #14 |
Senior Member
Join Date: March 20, 2009
Location: Norhthern Indiana
Posts: 307
|
Very nice indeed. I think I would tend to make the lever longer, but that is just a personal preference thing.
|
May 29, 2010, 02:55 PM | #15 |
Senior Member
Join Date: October 14, 2009
Location: San Diego County
Posts: 795
|
Zippy work of art's for sure, I don't suppose you have a set of plans you could share?
__________________
US Navy Retired,NRA Life Member,SASS member, Time magazine's Person of the Year 2006! |
May 29, 2010, 03:03 PM | #16 |
Member
Join Date: November 9, 2008
Location: South Carolina
Posts: 36
|
zippy
Fit, form and function in one stylish package! So when are you taking orders?
|
May 29, 2010, 04:33 PM | #17 |
Senior Member
Join Date: August 23, 2008
Location: SoCal
Posts: 6,442
|
Forklift, olyinaz, TomADC and emishi
Sorry, I'm not into manufacturing; but, I'll be pleased to send anyone a measured drawing (for non-commercial purposes). There's not much to the actual construction; yet, there were many hours of hand work fitting, sanding and finishing. If there was enough interest I could make-up some kits with the oak roughly shaped and drilled, or just some sticky-back templates. I was flabbergasted when I saw a simple lever Pietta loader priced at $54. Similar ones in the Dixie catalog are $37.95 and $45. Delmar, The lever grip could be easily made longer. I settled on the length I used after discussing it with HisSoldier. His loader has a 8-inch lever which seems longer than needed. CajunPowder, Zee pistole, she is kaput! The loader works great, and the Cabela's Pietta Remmy shoots MUCH tighter groups with the LEE 200 gr REAL conicals than with balls. The first time out I used 20gr FFFG equivalent of Pyrodex-P with Wonder-type wads. There was light recoil and it hit a pinch lower than point of aim. For the second wheel, I loaded 25 gr FFFG equivalent with the same wads. Recoil seemed a pinch heaver, and impact was right on POI. With the fourth shot, the loading lever swung down -- the additional recoil was enough to cause the loading lever to pop off the infamous Pietta barrel stud. Wish they had dovetailed it into the barrel like the originals and the Uberti. Now I have a good excuse to turn a bit of steel into a lever-less base pin latch. |
May 31, 2010, 07:36 AM | #18 |
Senior Member
Join Date: December 4, 2005
Location: Mojave Desert, CA
Posts: 1,195
|
Real nice job on them cyl. loaders ... i have the Mr. Six Guns one with a .45 punch Tim sent me with it.
But if yours are gonna be porduced for sale ,,,I'd be interested in one one or two of them... please pm me at let me know how they turn out. Got a Son that could use one, and I'd like one too.
__________________
"I Smoke Black Powder" "Favor an 1858 Remington" SGT. Smokin' Gun, Mosby's Rangers 43rd Virginia Cavalry C.S.A. SASS# 19634, ... Admin:http://blackpowdersmoke.com/oldcoots/index.php |
May 31, 2010, 11:10 AM | #19 |
Senior Member
Join Date: October 14, 2009
Location: San Diego County
Posts: 795
|
Zippy thanks for the plans, now I have something else to make!
__________________
US Navy Retired,NRA Life Member,SASS member, Time magazine's Person of the Year 2006! |
June 1, 2010, 09:46 AM | #20 |
Senior Member
Join Date: January 8, 1999
Location: Albuquerque, NM, USA
Posts: 2,543
|
zippy13, wow - great work. Thanks for the thread!
|
September 19, 2011, 08:41 PM | #21 |
Junior Member
Join Date: September 18, 2009
Posts: 14
|
Zippy13, if you were serious, when you said; "Sorry, I'm not into manufacturing; but, I'll be pleased to send anyone a measured drawing", I would like to take you up on your offer.
Thanks. Mule |
October 13, 2012, 09:38 AM | #22 |
Junior Member
Join Date: October 13, 2012
Location: Perryton, TX
Posts: 1
|
Cylinder Loading Press that's different
Zippy13, I did a search for a cylinder press and I got directed to yours. That press is awesome. I am just getting into Black Powder shooting and I would like to get hold of the measured drawing you used to make it.
|
October 13, 2012, 12:38 PM | #23 |
Senior Member
Join Date: December 5, 2007
Location: Virginia
Posts: 1,041
|
Very nice job.
|
October 13, 2012, 01:44 PM | #24 |
Senior Member
Join Date: September 16, 2007
Posts: 712
|
robhof
zippy13 I would also be interested in your measured drawings, your loaders are a thing of beauty and functional too.
|
October 13, 2012, 04:00 PM | #25 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Completely agree
This has got to be the nicest looking press I have ever seen.
__________________
Seek truth. Relax. Take a breath. |
|
|