The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old August 19, 2009, 10:35 PM   #1751
Wildekarrde
Junior Member
 
Join Date: August 13, 2009
Posts: 2
@Layton J1

Regarding the S&W 32 I have, its a hand ejector (sn 59XXX)
Wildekarrde is offline  
Old August 20, 2009, 10:38 AM   #1752
mstrain
Junior Member
 
Join Date: August 20, 2009
Posts: 1
S&W manufacture date?

I too need a date of manufacture for a new purchase. S&W M&P SN C341***.
Thanks to anyone that can give me a hand.
mstrain is offline  
Old August 20, 2009, 10:53 AM   #1753
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
mstrain: Between 1954 (C277555) and 1956 (C402923).
FlyFish is offline  
Old August 23, 2009, 09:25 AM   #1754
CraCZ
Member
 
Join Date: August 11, 2006
Location: tucson
Posts: 56
flyfish could you help date my S&W model 15-3 2"-# is 14K30xx-many thanks
CraCZ is offline  
Old August 23, 2009, 10:46 AM   #1755
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
CraCZ: 1977, sir.
FlyFish is offline  
Old August 23, 2009, 02:44 PM   #1756
gasmitty
Junior Member
 
Join Date: August 23, 2009
Location: Gilbert, AZ
Posts: 2
Looking for mfg date on a pair of M64s.

4" 64-3, S/N AWW3xxx

2" 64-4, DAO, S/N BEK8xxx

The 64-3 was allegedly a police turn-in, although I have no way to verify that.

The 64-4 appears to be a factory DAO version.

Any help is appreciated!
gasmitty is offline  
Old August 23, 2009, 04:11 PM   #1757
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
gasmitty:
AWW . . . 1987
BEK . . . 1989
FlyFish is offline  
Old August 23, 2009, 04:55 PM   #1758
gasmitty
Junior Member
 
Join Date: August 23, 2009
Location: Gilbert, AZ
Posts: 2
FlyFish, thank you!
gasmitty is offline  
Old August 23, 2009, 09:53 PM   #1759
KPK
Junior Member
 
Join Date: August 23, 2009
Posts: 3
How about a M19 Ser. # K618xxx and a M60 Ser. #R129xxx

Also what dashes?

Thanks!
KPK is offline  
Old August 23, 2009, 11:20 PM   #1760
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
How about a M19 Ser. # K618xxx and a M60 Ser. #R129xxx

Also what dashes?
K618XXX = 1965 and would be a 19-2.
R129XXX = 1974/75/76 range.

Jim
laytonj1 is offline  
Old August 24, 2009, 07:22 AM   #1761
KPK
Junior Member
 
Join Date: August 23, 2009
Posts: 3
Thanks Layton.

What would these be worth? The 19 is in good shape other than some blue wear on the muzzle and cylinder and the 60 is 90%, but doesn't have the original grips.
KPK is offline  
Old August 24, 2009, 11:48 AM   #1762
BlackJack
Senior Member
 
Join Date: November 16, 1999
Location: FL
Posts: 168
How about the date on a Model 17 no dash, SN: K4014xx?
BlackJack is offline  
Old August 24, 2009, 12:53 PM   #1763
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Quote:
How about the date on a Model 17 no dash, SN: K4014xx?
Interesting. From the S/N, the date according to SCSW would definitely be 1960, and not all that early in the year, which started with K386805 and ended with K429895. But the 17-1 was introduced in 1959. The difference between the 17 and the 17-1 was the change from a right hand to left hand thread on the extractor rod. Do you know which yours is?
FlyFish is offline  
Old August 24, 2009, 02:44 PM   #1764
gunhappy
Member
 
Join Date: September 10, 2004
Posts: 84
ok i'll play

686-3 Sn#:BNS35XX. Thanks in advance.
gunhappy is offline  
Old August 24, 2009, 02:52 PM   #1765
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
686-3 Sn#:BNS35XX
1993.

Jim
laytonj1 is offline  
Old August 24, 2009, 06:51 PM   #1766
BlackJack
Senior Member
 
Join Date: November 16, 1999
Location: FL
Posts: 168
Hey flyfish,

I'm not sure if it's right or left hand thread and I'm hesitant to put torque on the rod to find out. The gun is tight and works properly so I think I'll call it 1960. The only other clue I can provide is there is a letter "H" on the frame just above the serial number where the ejector rod rests if that helps. Below the serial number it clearly says MOD-17 with nothing following.
BlackJack is offline  
Old August 24, 2009, 07:35 PM   #1767
gunhappy
Member
 
Join Date: September 10, 2004
Posts: 84
thanx Jim

I appreciate your speed and willingness to help.
gunhappy is offline  
Old August 25, 2009, 07:45 AM   #1768
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Blackjack: I can certainly understand that you don't want to go messing around disassembling your revolver to check on the threads, but that may not be necessary. The newer left-hand thread rods have a slightly different shape from the older right-hand ones. The difference is that the right-hand rods don't change in diameter between the knurled end and the main part of the shaft, but the left-hand ones have a narrowed area between the two parts. I believe that's not an absolute rule, but that it does apply in most cases. These two photos show the difference:

Here's the right-hand threaded rod on a Model 17:


And this one's the left-hand threaded rod on a 17-3:


My guess (and its only that), is that the 1960 production date based on the S/N is correct, and if you have a left-hand threaded ejector it may be a 17-1 mis-marked as a 17. It wouldn't be the first time the wrong model number has been stamped. The alternative, I guess, is that they made up a 17 from parts in stock during what would have otherwise been the period when they were producing 17-1s. There are some folks here that know tons more about this than I do, so perhaps they can offer an opinion.

BTW, nice gun regardless of whatever the real story might be.
FlyFish is offline  
Old August 25, 2009, 09:13 AM   #1769
stigp6
Junior Member
 
Join Date: August 25, 2009
Posts: 4
S&W Model 10 - what year?

Got a model 10 recently with serial number S 9192xx in blue finish.

here's some pics





stigp6 is offline  
Old August 25, 2009, 09:31 AM   #1770
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
stigp6: 1945 to 1948, with the S/N range being from S811120 to S999999 - so toward the middle part of that time period is more likely, but it's not possible to be sure.

Good photo of a right-hand threaded ejector rod, by the way.
FlyFish is offline  
Old August 25, 2009, 01:50 PM   #1771
762_mm
Junior Member
 
Join Date: August 25, 2009
Posts: 2
Hello everyone,

I am new to this forum, but I have been active on other (canadian) firearm forums for years now. I have been collecting/accumulating firearms for some time now, both handguns and rifles (mostly WW2 relics).

Recently, I have developed a taste for the truly antique side of collecting and have bought my first antique revolver (French 1892 Service Revolver). Despite being over 100 years old, I really enjoyed that gun... so recently, when opportunity came, I bought my first antique S&W, but know nothing about it and need your help.

My gun is a S&W DA First Model, has a 4" barrel and a longer cylinder that can accept .44 special ammo as well as the regular .44 Russian. Despite being old, it has a modern looking S&W logo on the right side (the logo also says "Trade Mark") and "44 S&W CTG" on the left side of the barrel.

Serial number on the grip is 475XX (5 digit serial, no letters). I would be very appreciative is someone could tell me a little about this gun; with it's short barrel and longer cylinder, it looks like it was built specifically for self-defense in the old days, I would say. Thanks in advance!

762_mm is offline  
Old August 25, 2009, 04:12 PM   #1772
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Serial number on the grip is 475XX (5 digit serial, no letters). I would be very appreciative is someone could tell me a little about this gun; with it's short barrel and longer cylinder, it looks like it was built specifically for self-defense in the old days, I would say. Thanks in advance!
Caliber .44 S&W Russian, barrel lengths offered in 4", 5", 6" or 6.5". Blue or nickle finish. Target or service sights. Red or black hard rubber stocks. Serial number range was from 1 in 1881 to 53590 in 1913. Earlier production had 1-7/16" cylinder and starting at SN 15340 a 1-9/16 cylinder.

Serial number 352 is attributed to John Wesley Hardin.

Although production runs to 1913, all frames were manufactured prior to 1899.

Jim
laytonj1 is offline  
Old August 26, 2009, 12:30 AM   #1773
762_mm
Junior Member
 
Join Date: August 25, 2009
Posts: 2
Perfect, thank you very much for the info, Jim. I figured that the gun must be newer production at the very least, because it looks somewhat more modern than the rest of them. Maybe it's just the shorter barrel that gives it that appearance. I guess that the high serial number would mean that my piece was released towards the very end of the production. I guess that would somewhat explain the nice condition it is in, inside and out.

By the way, are there any modern aftermarket parts (mainly barrels and cylinders) available for these? I know that Navy Arms / Uberti make a copy of the "Third Model" with a barrel/cylinder that look the same. Would these parts fit? I was told that they wouldn't, but I'm looking for a second opinion (after all, if it is a perfect copy of the S&W, then it should be an exact fit).
762_mm is offline  
Old August 26, 2009, 12:56 AM   #1774
fortkevin2
Senior Member
 
Join Date: February 12, 2008
Location: NC
Posts: 318
S&W model 10

Just wondering if someone had any info on the 4D70XX serial number on my model 10. Thanks!
fortkevin2 is offline  
Old August 26, 2009, 07:08 AM   #1775
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
fortkevin2: 1979, which would make it a 10-7 if it has the tapered barrel, 10-8 if the heavy barrel. The full model number should be stamped on the part of the frame that's exposed when you swing the cylinder out. It should also have a pinned barrel.
FlyFish is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:57 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.46012 seconds with 9 queries