The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old January 13, 2019, 02:09 PM   #101
F. Guffey
Senior Member
 
Join Date: July 18, 2008
Posts: 6,957
Quote:
I thought I had answered this earlier, but I must have started to compose the post and never finished.
You could have finished and I was the one that lost interest. When it comes to reading a scope and I have to be told what it means in the real world I normally say BS when I do not agree.

So when it comes to the difficult owners have trying to determine why there is no answer it does not surprise me.

Sisk in Iowa Park: My oldest brother and Bruce Hodgdon went to visit him. Sisk thought it was going to be like 'old home weak', that was when he found Bruce Hodgdon was not happy with him. Bruce Hodgdon knew all the answers before he arrived at the shop.

F. Guffey
F. Guffey is offline  
Old January 13, 2019, 03:49 PM   #102
stagpanther
Senior Member
 
Join Date: March 2, 2014
Posts: 5,904
????
__________________
If you’re ever hiking in the woods and you get lost, just look up and find the brightest star in the sky and you’ll know which way space is.
I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk!
stagpanther is offline  
Old February 23, 2019, 08:27 PM   #103
Savvy_Jack
Member
 
Join Date: February 4, 2018
Posts: 87
Should'a did this pressure trace a long time ago but I feel more confident with my results using Buffalo Bore as my control. I have tested several semi-balloonhead 44WCF unheadtsamped cases as well as a few Western cases with Goex FFFG and get consistent 12,000psi. With Swiss FFG, a more dense powder, I got 14,000psi.

When Winchester first offered smokeless powder in the 44 WCF back in 1895, they used Dupont #2, then Sharpshooter and finally SR80.

"Twenty two years after its introduction, the first .44 W.C.F. smokeless powder cartridge is found in Winchester's catalog No. 55, dated August, 1895. In its manufacture, Winchester used 17 grains of DuPont No. 2 which was a "bulk" type smokeless powder patented on August 22, 1893. DuPont's description of "bulk" smokeless powder indicated that it was to be loaded in "bulk" measure just like black powder.

In the .44 W.C.F., 17 grs. of DuPont No. 2 Bulk Smokeless occupied the same volume as 40 grs. of FFG. Velocity was cataloged at 1,300 f.p.s. for a 55 f.p.s. increase over the the black powder cartridge. To identify the new .44 W.C.F. smokeless powder cartridges from those containing black powder, which looked identical, Winchester put a "W" in a circle on the primer." Dupont #2 had a similar burn rate as today's IMR-4227. However, Unlike 17gr of Dupont #2, 17gr of IMR-4227 is not a case capacity load but is a published load.

Lyman's 49th handloading manual shows a max load of 18.5gr of IMR-4227 with a Speer [email protected] 1,212fps. This load only gave me 1,097fps. 20gr of IMR-4227 produced 1,297fps but also created 12,000psi, just a tad over the 11,000psi max. A caseload (26gr) of IMR-4227 with the popular Magma type 200gr lead bullet resulted in 1,733fps but produced 20,913psi....only safe for Group II rifles like the Winchester 92/94 and Marlin's 1894. I am getting consistent 10 shot 4" groups at 100 yards.

Lyman's 49th lists a max load, 17gr of IMR-4227 with a Lyman 427098. They claim 1,083fps with no pressure listed for Group I rifles like the Winchester 73'. I tested 17gr in my 20" MGM barrel I used for high pressure testing. 17gr with a 427098 resulted in 1,127fps (replicating modern Winchester Super-X ammo velocity) @ 9,500psi. I tested 20gr with a 43-215C (427098 replica) resulted in 1,418fps @ 16,500psi but also included .5cc of PSB shot buffer to keep the powder at the back of the case. IMR-4227 is position sensitive and could be why some of my early velocity tests were lower than the manual.


22gr with a Winchester 200gr JSP (.425) produced 1,386fps at a lower 12,000psi, which closely replicated early Dupont #2 velocities. I feel safe using 12,000psi loads in my Winchester 73 replica and revolvers with .425-.427 lead or jacketed bullets.

I don't know which came first here, Shareshooter or SR80, but....

L&R Sharpshooter (burning rate similar to 2400 as well but easier to ignite since it is perforated) It was specifically used in black powder frame firearms. Since Winchester's first ammo boxes instructed not to be used in pistols, I assume Winchester may have used SR80 type powders rather than Shareshooter....but it still gets confusing.

Sharpshooter and SR80 had a similar burn rate as today's 2400. Although 2400 is an excellent powder, it too is not a bulk powder like Dupont but yet is bulky enough to prevent an accidental double charge without the powder overflowing the case. 20gr of 2400 can produce some hefty pressures.

20gr of 2400 with a 200gr Speer JHP produced 1,672fps @ 15,618psi, while a Seirra 210gr DCHP produced 1,640fps @ 19,500psi.

Sharpshooter was developed by Laflin & Rand, then offered by DuPont after they purchased L&R. Hercules produced it from 1912 on. It was a very flexible powder and after about 1900, was THE powder that was used in most all the b.p. cartridge factory smokeless loadings including the H.V., H.P. and W.H.V. (High Velocity) cartridges. It was used right up to the 1950's, after which it was discontinued.

Load data on the back of a Dupont Sharpshooter can notes 44-40 High Velocity, 19gr.

https://curtisshawk21.wixsite.com/44...keless-powders
Savvy_Jack is offline  
Old April 8, 2019, 09:56 AM   #104
Savvy_Jack
Member
 
Join Date: February 4, 2018
Posts: 87
I am done with my testings if anyone is interested in purchasing my PressureTrace II. I plan on advertising it in a few days. This is my first offer. I made 83 official tests plus some misc. tests with the 44-40. Of course, no strain gauges included...only had the one.
Savvy_Jack is offline  
Old April 8, 2019, 10:27 AM   #105
std7mag
Senior Member
 
Join Date: June 23, 2013
Location: Central Taxylvania..
Posts: 2,530
For the low, low price of????
__________________
This country was founded on two beliefs.
And I'm pretty sure pork rinds was one of them!
std7mag is offline  
Old April 8, 2019, 10:34 AM   #106
stagpanther
Senior Member
 
Join Date: March 2, 2014
Posts: 5,904
any particular reason you're selling--problems etc.?
__________________
If you’re ever hiking in the woods and you get lost, just look up and find the brightest star in the sky and you’ll know which way space is.
I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk!
stagpanther is offline  
Old April 8, 2019, 01:06 PM   #107
Savvy_Jack
Member
 
Join Date: February 4, 2018
Posts: 87
Hi guys, no...no problems. I had one problem (user problem) a while back that Jim fixed.

I have tested all I need to test and have no desire to test any other caliber.

I paid $600+

I'll let it go for $300 plus shipping. I think I got $300 worth of precious information out of it!!! Money well spent!

Module #738

I have no idea if Jim will honor any kind of owner transfer but he is a very nice guy and I doubt he would not want to answer anyone's questions. This thing can be finicky and I am not a "computer" person so all technical questions would have to go here or to Jim.
Savvy_Jack is offline  
Old April 8, 2019, 02:58 PM   #108
stagpanther
Senior Member
 
Join Date: March 2, 2014
Posts: 5,904
For a barely used unit that's steal! Mine has had many thousands of bullets pass by--the front of the unit is turning black.
__________________
If you’re ever hiking in the woods and you get lost, just look up and find the brightest star in the sky and you’ll know which way space is.
I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk!
stagpanther is offline  
Old April 8, 2019, 03:08 PM   #109
Savvy_Jack
Member
 
Join Date: February 4, 2018
Posts: 87
I won't offer it this cheap anywhere else but it doesn't mean I won't drop to this price fast...lol!! You guys were some of the first to help so I wanted to offer to someone here first!
Savvy_Jack is offline  
Old April 8, 2019, 03:30 PM   #110
stagpanther
Senior Member
 
Join Date: March 2, 2014
Posts: 5,904
I just realized I had a senior moment and confused it with my labradar--but it's still a good tool for those who are trying out wildcats or trying the boundaries of their hand loads.
__________________
If you’re ever hiking in the woods and you get lost, just look up and find the brightest star in the sky and you’ll know which way space is.
I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk!
stagpanther is offline  
Old April 8, 2019, 03:33 PM   #111
Savvy_Jack
Member
 
Join Date: February 4, 2018
Posts: 87
lol...you are correct there.
Savvy_Jack is offline  
Old April 9, 2019, 10:49 AM   #112
std7mag
Senior Member
 
Join Date: June 23, 2013
Location: Central Taxylvania..
Posts: 2,530
Figures!!
Forbes 24B on lay a way.
CZ720 comes in on Thursday.
AND pick up new to me vehicle on Saturday. Which wife insisted we were putting a decent chunk as down payment...
__________________
This country was founded on two beliefs.
And I'm pretty sure pork rinds was one of them!
std7mag is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07956 seconds with 10 queries