The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old January 4, 2019, 07:27 PM   #1
Spur0701
Senior Member
 
Join Date: February 2, 2005
Posts: 202
40SW 180 Gr Cast Load for BE-86

I've been loading 9mm and 40SW with BE-86 with great success the last couple of years.....but all those loads have been with JHP or FMJ. I've got a couple of big boxes of some cast .401 at 180 gr and want to load them up but am not finding any data on loading BE-86 for cast......Alliant's web site doesn't have any data for cast, and my google searches aren't turning up any cast loads for 40SW. Anyone have any they can share or advice on working up a load from a jacketed load?
Spur0701 is offline  
Old January 4, 2019, 08:25 PM   #2
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 15,567
It produces high enough velocities that it may require a minimum start pressure that is harder to achieve with lead. You could certainly try it with jacketed bullet starting loads (10% below Alliant's listed loads) and see if the powder burns dirty or you get erratic velocity or other issues. It is also possible they just haven't tested any at this point. You could call Alliant to ask.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member and Golden Eagle
Unclenick is offline  
Old January 4, 2019, 09:40 PM   #3
Bimus
Senior Member
 
Join Date: April 15, 2018
Location: Farmington NM
Posts: 106
I have been using BE-86 in 45 ACP in a Uzi with 200 grain cast with great results There are loads for 185 grain cast 45ACP .I know you are looking for 40 s&w the Alliant web site is the only place I found information on this powder .
Bimus is offline  
Old January 12, 2019, 12:31 PM   #4
Spur0701
Senior Member
 
Join Date: February 2, 2005
Posts: 202
Just to close out this thread for anyone that might run across it in a search looking for similar info......a member over at Castboolits recommended a load, I tried it and am happy with it, see here: http://castboolits.gunloads.com/show...95#post4547995
Spur0701 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:00 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06400 seconds with 10 queries