The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old April 14, 2009, 05:40 PM   #1351
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
polkey: At a guess I would say you have .44 Double Action, these where manufactured in the serial number range 1 - 54668 Between 1881 & 1913. All frames were manufactured prior to 1899 and as a result all New Model number threes are classified as antiques by the BATF.
Radagast is offline  
Old April 14, 2009, 10:04 PM   #1352
Smithlover
Junior Member
 
Join Date: April 14, 2009
Posts: 1
I would like some # help as well please

I have two 629's that I would really appreciate some help assertaining the DOB.

629-1 Magnaport Custom #AFB77XX

629-4 (8 3/8") #CAY46XX

Thanks so much, and I will buy the books!

Last edited by Smithlover; April 15, 2009 at 12:12 AM.
Smithlover is offline  
Old April 15, 2009, 06:03 AM   #1353
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
Smithlover: Your 629-1 was probably made in November 1984, serial number prefixs AEV & AFJ are recorded for that month and yours falls in between.

Your 629-4 was probably made sometime in 1996. Serial number prefix CAN was recorded in January and CBA was recorded in September.
Radagast is offline  
Old April 16, 2009, 09:46 AM   #1354
protwin
Junior Member
 
Join Date: April 13, 2009
Posts: 3
thanks

thanks radagas alot, I am going to sell the 1980 unfired model 57 41 mag so i just wanted to know all about it.
protwin is offline  
Old April 16, 2009, 02:23 PM   #1355
J A
Senior Member
 
Join Date: March 1, 2009
Location: The Hawkeye State
Posts: 191
One for me please

I have a 686-3 with serial no. BFL26xx. Thanks! Jim
J A is offline  
Old April 16, 2009, 06:15 PM   #1356
rusherbob
Member
 
Join Date: April 15, 2009
Posts: 26
model 66

Okay, I will buy the book but now I'm curious. My model 66 stainless 4 inch barrel. The serial # is 7K17xxx. There is also another # there when I open the cylinder. It is 44642. What's that. And what year? Thanks you guys, and yes I will buy the book.
rusherbob is offline  
Old April 16, 2009, 09:09 PM   #1357
zippo7883
Junior Member
 
Join Date: April 16, 2009
Posts: 2
Grandfather's Gun

I just ordered the SCSW book, but I can't wait for it to get here.
I have my grandfather's SW k 1704xx in .22 holds 6 rounds. 4" barrel. blued. Large screw near the adjustable rear sight. Case Color Hammer and Trigger. Wide spur on the hammer.

Any help would be appreciated. and I am very excited for the SCSW to arrive.

Last edited by zippo7883; April 16, 2009 at 09:41 PM.
zippo7883 is offline  
Old April 17, 2009, 07:31 AM   #1358
crashband7
Junior Member
 
Join Date: April 16, 2009
Posts: 3
S&W 19-4 Nickel

I just purchased a s&W 19-4 and was hoping someone could help me determine what year it was made the serial number stars with 66k2.
crashband7 is offline  
Old April 17, 2009, 07:48 AM   #1359
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
crashband 7: 1980. Serial number range was 57K0001 to 91K6800.

Zippo7883: 1952. Serial number range was K136691 to K175637. Assuming your gun has a ramp front sight then it is a Pre-Model 18, the K22 Combat Masterpiece.

rusherbob: 1974.Serial number range was 7k1 to 7K26043. The other number is an 'assembly number' used to track fitted parts as they moved around the factory.

J A: 1990, probably around July, as BFL 1101 to BFL1535 is recorded for that month. Some of the three letter serial prefixes are out of date sequence that year, so it may have been made earlier or later, but that's the best guess without paying $50 for the S&W historian to look your gun up for you. The 686-3 was made from 1988 to 1993.
Radagast is offline  
Old April 17, 2009, 08:12 AM   #1360
zippo7883
Junior Member
 
Join Date: April 16, 2009
Posts: 2
Thank you

Thank you very much Radagast!
zippo7883 is offline  
Old April 17, 2009, 08:40 AM   #1361
buckit
Member
 
Join Date: March 2, 2008
Location: North Florida
Posts: 62
How about a date for a

4'' nickel S&W .32 long #8070 inside yoke and # 387*** under the shroud
thanks
buckit is offline  
Old April 17, 2009, 08:55 AM   #1362
abber
Senior Member
 
Join Date: January 15, 2008
Location: PRK
Posts: 735
Yeah, I'll buy the book too...
abber is offline  
Old April 17, 2009, 09:30 AM   #1363
crashband7
Junior Member
 
Join Date: April 16, 2009
Posts: 3
19-4

Thanks Radagast
crashband7 is offline  
Old April 17, 2009, 02:35 PM   #1364
J A
Senior Member
 
Join Date: March 1, 2009
Location: The Hawkeye State
Posts: 191
Thanks!!!!

Thanks Radagast. Jim
J A is offline  
Old April 17, 2009, 07:16 PM   #1365
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
buckit: When you say under the shroud, I assume you mean under the barrel? The number under the yoke is probably an assembly number, used to track parts in the factory. The serial number should be under the barrel, on the cylinder and on the bottom of the grip frame.
Assuming 387xxx is the serial number, you have a .32 Hand Ejector Third Model, a six shot gun built on the small I frame & manufactured between 1917 & 1942 in the serial number range 263001 to 536684.
Heat treating of barrels began at serial number 321000 in 1921, so I would place your gun in the early 1920s.
Radagast is offline  
Old April 17, 2009, 07:25 PM   #1366
buckit
Member
 
Join Date: March 2, 2008
Location: North Florida
Posts: 62
Thanks for the info Rad
buckit is offline  
Old April 19, 2009, 10:26 PM   #1367
stilettosixshooter
Member
 
Join Date: April 19, 2009
Location: Texas
Posts: 86
Model 51?

Bought my first gun today, and am going to buy the book! In the meantime, I've been desperately searching online for info on my Smith & Wesson .22 mag revolver stamped "MOD-51" with serial "M35XXX." Is this enough info to estimate how old it is? I knew the gun was used, but wasn't thinking it was more than a year or two old - I'm delighted it may be several decades, if it is, in fact, a Model 51.
stilettosixshooter is offline  
Old April 20, 2009, 05:25 AM   #1368
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
stilettosixshooter: The model 51 was the .22 magnum J frame kit gun. The serial number falls in the range for 1971 to 1973, being M30001 to M60000.
If it has a round butt it may have value to a collector as only 600 were made, the rest being square butt versions.
Radagast is offline  
Old April 20, 2009, 09:57 AM   #1369
stilettosixshooter
Member
 
Join Date: April 19, 2009
Location: Texas
Posts: 86
Thanks so much! It has a square butt, but I am in love with it regardless and don't plan on trading it in anytime soon!
stilettosixshooter is offline  
Old April 21, 2009, 07:47 PM   #1370
wolfehunter
Junior Member
 
Join Date: April 21, 2009
Posts: 2
Model 629-3

Just joined today but have been reading a ton of information on here for some time! I was wondering about the date of manufacture of my 629-3 as the serial # is BFM26XX I plan to put a scope on it for hunting whitetail here in Pa. and was hoping to put a B-Square no drill base if it is made after 1992 as I have read that most Smith's made after 92 were pre drilled. Thanks for any info.

Scott

Last edited by wolfehunter; April 22, 2009 at 09:20 AM.
wolfehunter is offline  
Old April 22, 2009, 05:03 PM   #1371
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
The 629-3 was made from 1989 to 1993, the 629-4 was drilled and tapped. Your gun was made some time in 1990.
Radagast is offline  
Old April 23, 2009, 12:45 AM   #1372
tracyballard
Junior Member
 
Join Date: April 23, 2009
Posts: 1
10-5, blued, 5 inch tapered barrel - D3649xx

when was this made, and what years was the D prefix used?
tracyballard is offline  
Old April 23, 2009, 06:46 AM   #1373
wolfehunter
Junior Member
 
Join Date: April 21, 2009
Posts: 2
Thanks a lot Radagast. I'll be taking it to my local gunsmith for drilling and tapping.
wolfehunter is offline  
Old April 23, 2009, 07:57 PM   #1374
precision40
Junior Member
 
Join Date: February 19, 2006
Posts: 4
I just got a 5906.

Serial #BAW6xxx

Any Help?
precision40 is offline  
Old April 23, 2009, 08:51 PM   #1375
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
Precision40: Per the Standard catalog of S&W the 5906 range should have a serial number prefix TAA or higher. The BAW prefix should be on a revolver.

BAWxxxx should fall in the period January 1988 (AYMxxxx) to July 1988 (BBFxxxx), but the 5906 was introduced in 1989.

Hopefully someone more educated than I will be able to sort your query out.
Radagast is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:15 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.28381 seconds with 9 queries