The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old July 30, 2014, 08:29 AM   #6626
Mojave
Member
 
Join Date: June 11, 2011
Posts: 68
Thanks Sevens!! I don't have the guns in front of me at work, but I'm pretty sure it doesn't have the diamond inserts.
Mojave is offline  
Old July 30, 2014, 12:45 PM   #6627
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
They are desirable simply because Smith & Wesson discontinued them, but no big deal either way.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old August 3, 2014, 05:10 PM   #6628
bnmorgan
Junior Member
 
Join Date: January 24, 2010
Location: Ecru, Mississippi
Posts: 3
Just back from an estate sale....picked up a .32 Long revolver, 6 shot, DA. Butt says Ø6107 and frame/yoke says 44728. is nickel plated, and could use some TLC to the plating. Would someone mind giving me some insight as to what it is, and if $60 was a good price?
bnmorgan is offline  
Old August 5, 2014, 07:57 PM   #6629
C1PNR
Member
 
Join Date: October 4, 2004
Location: SW Idaho
Posts: 20
I just picked up one my Wife has asked about a couple of times. It's a 32 S&W Long in a 30-1 # H40xxx in nice shape with just some apparent holster wear on muzzle and cylinder front.

Anybody have an idea when it was made?
C1PNR is offline  
Old August 5, 2014, 08:04 PM   #6630
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
Quote:
Just back from an estate sale....picked up a .32 Long revolver, 6 shot, DA. Butt says Ø6107 and frame/yoke says 44728. is nickel plated, and could use some TLC to the plating. Would someone mind giving me some insight as to what it is, and if $60 was a good price?
I'm confused by the leading zero on the number you report on the butt of the revolver. I'm no expert, but I don't see S&W punching up a leading zero, as if the revolver has a 4-digit serial number, but they elected to punch it up as 06107. I say, please look again at the butt of the revolver.

At this point, if it seems functional, not falling apart and the cylinder turns when cocked....

...without knowing ANYTHING else, if it's a Smith & Wesson, it is certainly worth the $60 you spent, and more.
Quote:
I just picked up one my Wife has asked about a couple of times. It's a 32 S&W Long in a 30-1 # H40xxx in nice shape with just some apparent holster wear on muzzle and cylinder front.

Anybody have an idea when it was made?
1971, it appears.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old August 6, 2014, 07:25 PM   #6631
C1PNR
Member
 
Join Date: October 4, 2004
Location: SW Idaho
Posts: 20
Thanks Sevens. I have so few S&W's, and little chance of obtaining more anytime soon, that getting the book just doesn't make fiscal sense.

I wonder if the Library has a copy, I'm guessing they don't but I think I'll check.

Thanks again for the information.
C1PNR is offline  
Old August 7, 2014, 01:31 PM   #6632
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
If the budget strings are pulled so tightly that you fear damage to the fingers, I certainly understand. But please know that this book is far, FAR more valuable than looking up a few serial numbers. There's an almost irrational amount of quality, interesting detail in it and piles of pictures. You can open it up to almost any page and just read for pleasure.

My mouth waters at the hope & prospect of a new edition of this book!
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old August 10, 2014, 03:04 AM   #6633
CajunBass
Senior Member
 
Join Date: May 6, 2005
Location: North Chesterfield, Virginia
Posts: 4,778
K-Frame hand ejector, 6" barrel, fixed sights, six shots, 38 special, single line address (Made in USA), S/N 678690.
__________________
For God so loved the world, that He gave His only begotten Son, that whoever believes in Him should not perish, but have everlasting life.
John 3:16 (NKJV)
CajunBass is offline  
Old August 10, 2014, 07:40 AM   #6634
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
That's another one that falls in to the H-U-G-E serial number range between the start of the 4th Change guns (1915) and the last of production before the Victory model. The table in the book only tells us that your revolver is near the very end of that, with 1941/42 being "likely."

Best way to know is the factory letter.
Second best way to know is to scour forum pages and auction/sale pages for a revolver with a similar serial number that does have a factory letter, and find out when it was shipped.

Sorry.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old August 11, 2014, 04:19 AM   #6635
CajunBass
Senior Member
 
Join Date: May 6, 2005
Location: North Chesterfield, Virginia
Posts: 4,778
Thanks Sevens. That's close enough for me.
__________________
For God so loved the world, that He gave His only begotten Son, that whoever believes in Him should not perish, but have everlasting life.
John 3:16 (NKJV)
CajunBass is offline  
Old August 11, 2014, 07:26 PM   #6636
walterppk
Junior Member
 
Join Date: August 11, 2014
Posts: 2
model 65 357

picked at the range today a nice model 65-5 357 6 shooter stainless 3 inch very nice
BCAXXXX any idea when it was made thanks

Last edited by walterppk; August 11, 2014 at 10:58 PM. Reason: model number
walterppk is offline  
Old August 12, 2014, 04:12 AM   #6637
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
Smith & Wesson got goofy with the three letter prefix serial numbers and did many letters out of order. My best guess on the BCAxxx when I look at the table is that it's a late 1988 or an early 1989.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old August 12, 2014, 09:00 AM   #6638
walterppk
Junior Member
 
Join Date: August 11, 2014
Posts: 2
thanks sevens

thanks sevens
walterppk is offline  
Old August 13, 2014, 06:43 AM   #6639
CowTowner
Senior Member
 
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
How about a date for what I believe is a Model 4? 76XXX is the S/N.
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor
“Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy
CowTowner is offline  
Old August 13, 2014, 01:36 PM   #6640
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
Please give more information. I don't recognize a "Model 4"

What's the caliber?
Describe the handgun?
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old August 13, 2014, 02:23 PM   #6641
CowTowner
Senior Member
 
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
caliber is a.32 S&W. The gun is a top break revolver, nickle plated with engraving.
Perhaps this old thread with pictures will help?
http://thefiringline.com/forums/showthread.php?t=517253

I guess I should has stated it is a 4th model as opposed to a model 4. Not being a S&W guy, all I can say is "OOPS!"
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor
“Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy

Last edited by CowTowner; August 13, 2014 at 02:40 PM.
CowTowner is offline  
Old August 13, 2014, 02:40 PM   #6642
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
That is extremely cool!
The 3rd post in that thread you linked by James K has all the answer that my book has. You'd need a S&W factory letter from Roy Jinks to glean more.

The factory letter will cost you $50 and will take 6-8 weeks to get. It'll give you a brief history on the model, it will tell you where it was originally shipped for sale and it'll tell you how the revolver left the factory, including the engraving.

Nice revolver!

Not a "Model 4" but rather a ".32 Double Action 4th Model"
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old August 15, 2014, 08:07 AM   #6643
Jake Chandler
Junior Member
 
Join Date: December 12, 2009
Posts: 4
I have a S&W .38 Special round butt #227057
What year, model and frame is this.
Thank you!
Jake Chandler is offline  
Old August 15, 2014, 02:42 PM   #6644
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
That's not enough information for me to be sure of what you have, and that you describe it as a "round butt" muddys the water even more.

That serial number could fit in at least two different .38 cal models...
It could be a .38 Safety Hammerless 5th Model, the number putting it's manufacture somewhere in the 1910-1920 range. That would be a top-break revolver.

A picture or more information would help.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old August 17, 2014, 10:29 AM   #6645
blyytinen
Junior Member
 
Join Date: August 16, 2014
Posts: 1
model 57 no dash

I just purchased a used model 57 blued 6 shot six inch .41 magnum revolver. The serial is n477xxx. Wondering when it was made and possible value. The bluing is probably 95+ percent and has a few handling marks.

Any help would be greatly appreciated.
Attached Images
File Type: jpg 20140817_170054.jpg (147.5 KB, 66 views)
File Type: jpg 20140817_170031.jpg (151.2 KB, 45 views)
File Type: jpg 20140817_170017.jpg (168.4 KB, 66 views)

Last edited by blyytinen; August 17, 2014 at 04:04 PM. Reason: added pics
blyytinen is offline  
Old August 17, 2014, 02:26 PM   #6646
Jake Chandler
Junior Member
 
Join Date: December 12, 2009
Posts: 4
Thank you for taking the time to research my S&W revolver.
I'm not sure what model, year, or frame type it is. I've included
two photos along with what's stamped on it. Any help would be appreciated.

Under the grips on the base of the butt serial#227057
On the cylinder serial#227057
Under the barrel serial#B 227057
On the crane Serial#5696

Stamped on the barrel, Smith&Wesson Springfield Mass USA
Patd March 22,96.May.21.95.
Aug 4.96 Dec 22, 96. Oct.8.01
Dec.17.01 Feb.6.06. Sep.14.09
On each side of the barrel stamping there are two Maltese crosses.

Jake Chandler is offline  
Old August 17, 2014, 10:05 PM   #6647
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
Quote:
Thank you for taking the time to research my S&W revolver.
I'm not sure what model, year, or frame type it is. I've included
two photos along with what's stamped on it. Any help would be appreciated.
I think what you've got here is a .38 Hand Ejector Military & Police, Model of 1905, 3rd Change, and the number range of those revolvers ran to 241703 and ran from 1909 to 1915. It would be my guess that yours would be around 1914 or 1915?

The wood stocks on it now are not the original grips, those are far more modern.

This revolver evolved in to the Victory Model and eventually, the Model 10.
It is a K-frame, and the most produced single model of handgun... ever!
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old August 17, 2014, 10:11 PM   #6648
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
Quote:
I just purchased a used model 57 blued 6 shot six inch .41 magnum revolver. The serial is n477xxx. Wondering when it was made and possible value. The bluing is probably 95+ percent and has a few handling marks.

Any help would be greatly appreciated.
Nice one. Built in 1978 according to the book.

Value is wild animal, especially on a .41 Magnum. Definitely a less-traded Smith & Wesson revolver, and many dealers would look at it that way. They'd be less inclined to want to take it in as it might be more difficult to sell. However, that's a two-way street, as .41 Magnum fans simply KNOW they don't have a lot of guns to choose from, and they might pay a premium to get it.

So value would be generally difficult to assess, but if I have to take a wild stab in the dark given what I've seen at the many gun shows I've attended, I would imagine $800 is somewhere in the ballpark.

Running a number of searches on Gunbroker over a period of time is another way to get an idea of "value," and the closed & SOLD auctions are far more informative than the ones with crazy prices and zero bidders.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old August 18, 2014, 11:24 PM   #6649
AdamSean
Senior Member
 
Join Date: November 18, 2007
Location: Tuscaloosa, AL
Posts: 479
I need the age of my Model 66-2 square butt, S/N AUW8XXX.

AdamSean is offline  
Old August 19, 2014, 01:59 PM   #6650
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
I happen to have a six-inch Model 66 with the AVBxxx serial number and ours are of the same production cycle, most likely 1987.

The table for serial numbers in that era is a little wacky with some numbers a bit out of order, but either very late '86 or early 1987 seems most likely.

Yours is in far, FAR better condition than is mine, I was able to get mine for a song because of it's condition, but it's a fantastic shooter and I'm thrilled to own it.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:51 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.48678 seconds with 9 queries