The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old October 20, 2008, 06:59 PM   #551
SteelyNirvana
Member
 
Join Date: December 30, 2006
Posts: 43
Model 66

Quote:
I have an 4" model 66 serial # 4K505** I think it was made around '74 but not sure.
Anyone? or is '74 the right year?

Thanks
SteelyNirvana is offline  
Old October 20, 2008, 07:06 PM   #552
pgordon67
Junior Member
 
Join Date: October 20, 2008
Posts: 4
Dating Handguns

I'm trying to date a couple of guns I inherited. I don't know much about guns. They are both S&W one is a 38 special #K 224xxx and I think a 45 #K275xxx. Thanks for any help.
pgordon67 is offline  
Old October 20, 2008, 08:04 PM   #553
oilman01
Junior Member
 
Join Date: October 11, 2008
Posts: 3
Quote:
1) Does the gun have an intertwined-"S&W" logo on it?
Yes on the handle.

2) Do you load and unload the gun by pressing a latch on the side, which makes the cylinder swing out to the left?
No

3) If not, I assume that you load and unload the gun by squeezing two buttons on the top rear of the gun,
No buttons there is a lever on top, in front of the trigger, you lift up that makes the barrel hinge down and cylinder hinge up.
I assume that it is still considered a top break.
Does it have a visible hammer? yes

4) If so, does it have a trigger guard (loop of metal around the trigger), and does the hammer move backwards by itself when the trigger is pulled? These two features should normally coincide.
Yes

OK, my explanation of how to open a top-break wasn't very accurate, but anyways...

It's a .32 Double Action 3rd Model, manufactured 1882-1883.
Thanks for all your help can you tell me what the gun might be worth? I will try to post pictures.

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
oilman01 is offline  
Old October 20, 2008, 08:25 PM   #554
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Anyone? or is '74 the right year?
I answered that back on post # 548... 1973.

Jim
laytonj1 is offline  
Old October 20, 2008, 08:32 PM   #555
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I'm trying to date a couple of guns I inherited. I don't know much about guns. They are both S&W one is a 38 special #K 224xxx and I think a 45 #K275xxx.
K224XXX = 1954
K275XXX = 1956 and "K" frames were only offered in 22LR thru 357 Magnum.

Jim
laytonj1 is offline  
Old October 21, 2008, 12:33 AM   #556
agdrummer
Junior Member
 
Join Date: October 21, 2008
Posts: 3
Hello,

My dad just passed his S&W down to me. Model 27-2, Serial N611XXX. Any information about this beauty would be much appreciated. Other than slight wear at the muzzle, she looks awesome and hasn't been fired much.

Thanks in advance,
agdrummer
agdrummer is offline  
Old October 21, 2008, 12:41 AM   #557
bamban
Junior Member
 
Join Date: September 16, 2007
Location: Austin, TX
Posts: 2
I just acquired a Model 19-3 S/N 2K35186. I tried to find out the manufacture date of the piece so searched for serial number look up and it pointed me to this site. As I went through the posts I can see why, there are some very knowledgeable people on this site on the S&W models and serail numbers.

Could you guys kindly let me know what the manufacture date?

Is there a website I can look up additional information about the M19, like where it was old originally for example.

Thank you in advance for your help.
bamban is offline  
Old October 21, 2008, 01:43 AM   #558
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Model 27-2, Serial N611XXX
1979/80. The -2 was the last version to have the pinned barrel and recessed cylinder chambers (P&R) making it more desirable to collectors.
Quote:
Model 19-3 S/N 2K35186
1971. You can find a lot of information about S&W's in general from the book The Standard Catalog of Smith and Wesson. That's were we get the serial number to manuf. dates from. To find out the exact date your gun was shipped and were it shipped to you will have to pay for a letter/history look up from S&W which just increased to $50.
You can also go to this forum to learn more about S&W's:
http://smith-wessonforum.com/eve/

Jim
laytonj1 is offline  
Old October 21, 2008, 09:01 PM   #559
bamban
Junior Member
 
Join Date: September 16, 2007
Location: Austin, TX
Posts: 2
Jim,

Thank you for help.
bamban is offline  
Old October 22, 2008, 02:04 PM   #560
Jonathank1982
Member
 
Join Date: September 16, 2008
Location: Western NY
Posts: 20
S&W Serial Number

Hello, I just placed a MINT S&W Model 10, 2 in barrel on layaway. Looks like it has never been fired. The blueing is in perfect condition and the wooden grips still retain their shine.

Could you please tell me the age of the weapon.

S&W Model 10 2 in # 10D94XX

P.S. Also, could you please tell me the age of Model 18-1 # D9387XX
Thanks much!

Jonathan

Last edited by Jonathank1982; October 22, 2008 at 02:51 PM.
Jonathank1982 is offline  
Old October 22, 2008, 10:25 PM   #561
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
S&W Model 10 2 in # 10D94XX

P.S. Also, could you please tell me the age of Model 18-1 # D9387XX
10D94XX = 1982.
A model 18-1 would be "K"9387XX = 1969.

Jim
laytonj1 is offline  
Old October 25, 2008, 08:37 PM   #562
polkey
Junior Member
 
Join Date: October 25, 2008
Posts: 6
old serial number

it's a .38 DA 4th Model 3 1/2 barrel
s/n 5013xx
i know it's pretty old
you wouldn't happen to be able to tell me how old it is?
polkey
polkey is offline  
Old October 26, 2008, 04:32 PM   #563
Mezzaluna
Junior Member
 
Join Date: October 26, 2008
Posts: 1
I inherited a S&W model 19-3 with a serial 4K32XXX, could someone tell be about how old it is? thanks
Mezzaluna is offline  
Old October 26, 2008, 07:19 PM   #564
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
it's a .38 DA 4th Model 3 1/2 barrel
s/n 5013xx
i know it's pretty old
you wouldn't happen to be able to tell me how old it is?
SN 322701-539000 made from 1895 - 1909.


Quote:
I inherited a S&W model 19-3 with a serial 4K32XXX, could someone tell be about how old it is?
1973.

Jim
laytonj1 is offline  
Old October 27, 2008, 07:00 PM   #565
scootis9
Junior Member
 
Join Date: October 27, 2008
Posts: 2
Model 10 S&W

Can anyone give me a mfg date on my model 10 S&W. Serial #789xxx
scootis9 is offline  
Old October 27, 2008, 10:09 PM   #566
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Can anyone give me a mfg date on my model 10 S&W. Serial #789xxx
Depends on the letter prefix,
If "C" then 1964/65, if "D" then 1975.

Jim
laytonj1 is offline  
Old October 28, 2008, 08:32 PM   #567
kenrcrane
Junior Member
 
Join Date: October 28, 2008
Posts: 3
Hi, I am trying to find some info for my Dad regarding the history and year of his Smith and Wesson revolver.

I am unable to find a model # anywhere.
I believe it's a 4" Barrel and says .38 S&W Special CTG.
It has a hand ejector button on the side.
The S/N is V136XXX

Thanks for any Help.
Ken

Last edited by kenrcrane; October 30, 2008 at 12:58 AM.
kenrcrane is offline  
Old October 29, 2008, 10:02 AM   #568
Insayn
Junior Member
 
Join Date: October 29, 2008
Posts: 1
I just picked up Smith & Wesson Regulation Police CTG in .38s&w. The serial number is close to 23XXX. Just using the blanket serial number coverage for this shows it to be made from 1917-1940.
Can anyone else give me a little more information on this piece? I will send off for the S&W letter on November 1st when they allow applications again. Thanks!



Insayn is offline  
Old October 29, 2008, 09:52 PM   #569
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I am unable to find a model # anywhere.
I believe it's a 4" Barrel and says .38 S&W Special CTG.
It has a hand ejector button on the side.
The S/N is V136298
V1 - V811119 were made from 1942 - 1945.
The 38 Special Victory model. The "V" prefix stood for Victory as these were made for the military during WWII. These are a early version of what went on to become the model 10 when S&W changed to model numbers in 1958.

Quote:
I just picked up Smith & Wesson Regulation Police CTG in .38s&w. The serial number is close to 23XXX. Just using the blanket serial number coverage for this shows it to be made from 1917-1940.
Unfortunately, the book only shows SN 1 - 54474 from 1917 - 1940. You might be able to get a closer dob from S&W customer service over the phone for free. Cost nothing to try.

Jim
laytonj1 is offline  
Old October 30, 2008, 12:59 AM   #570
kenrcrane
Junior Member
 
Join Date: October 28, 2008
Posts: 3
Thanks Jim!
kenrcrane is offline  
Old October 30, 2008, 08:38 AM   #571
carguychris
Senior Member
 
Join Date: October 20, 2007
Location: Richardson, TX
Posts: 7,523
Quote:
I believe it's a 4" Barrel and says .38 S&W Special CTG.
It has a hand ejector button on the side.
The S/N is V136XXX
I can get a little more specific than laytonj1. Your gun was made in October or November of 1942. Wartime demand was so great that S&W shoved Victories out the door as fast as they could crank them out, making it very easy for collectors to correlate the build dates and serial numbers. BTW I own V92514; it has a 5" barrel and is chambered in .38/200 (.38S&W) for export to the U.K. under Lend-Lease.

FWIW your gun should have smooth walnut stocks, a lanyard loop on the butt, and a tiny "flaming bomb" U.S. military acceptance mark on the butt in front of the loop. Most Victories in this timeframe had "Black Magic" finish, which is a matte finish similar to parkerizing but more dark grey than black, and it tends to be thinner and more easily scratched. However, these guns were frequently refinished and fitted with aftermarket stocks when they were resold on the surplus market after the war.

Also look for other marks; Victories used by the U.S. Navy were frequently marked in a variety of ways, and these guns were also issued to guards at various wartime production factories, so they can also be found with markings for various U.S. corporations. However, guns marked "U.S.M.C." were reposrtedly used by the U.S. Maritime Commission, not the Marine Corps.
carguychris is offline  
Old October 31, 2008, 12:54 AM   #572
kenrcrane
Junior Member
 
Join Date: October 28, 2008
Posts: 3
Quote:
I can get a little more specific than laytonj1.
Thanks carguychris! That info was very helpful.
kenrcrane is offline  
Old November 1, 2008, 02:51 PM   #573
horzo
Junior Member
 
Join Date: November 1, 2008
Posts: 1
Another search...

Inherited my grandfather's revolver recently.

It's a heavy (N-frame?) S&W .357 w/a 6" barrel. I'm assuming a model 27. I think purchased in the 50s, but don't really know. Don't have the original box or manual.

SN: S108xxx
horzo is offline  
Old November 1, 2008, 08:02 PM   #574
custer13
Junior Member
 
Join Date: August 24, 2007
Posts: 7
Smith @ Wesson model 10-5

Can you help with the dating of this revolver I just purchased. I'm wanting to find the dating of its birth. The serial is: D93xxx. It is a 4 inch barrel. Blue finish in 38 cal..

Also, can I use plus P ammo in this gun. thanks
Stanley
custer13 is offline  
Old November 1, 2008, 10:37 PM   #575
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Can you help with the dating of this revolver I just purchased. I'm wanting to find the dating of its birth. The serial is: D93xxx. It is a 4 inch barrel. Blue finish in 38 cal..

Also, can I use plus P ammo in this gun.
1969. +P would be okay.

Jim
laytonj1 is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:29 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.48216 seconds with 9 queries