The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old September 16, 2010, 08:19 PM   #3376
Miata Mike
Senior Member
 
Join Date: May 22, 2010
Location: North East WI
Posts: 418
Quote:
The book only covers auto serial numbers up to 1998, so S&W has obviously started using something other than the "T" (and it also mentions "U" and "V") prefix for their autos. They must have started producing 4586s again after the most recent edition was published, because SCSW definitely references only '91 to '99 for the 4586, along with 2000-02 for the 4586TSW.
I was very surprised to see that it was only 5 years old and not part of the original years of manufacture.
Miata Mike is offline  
Old September 16, 2010, 08:24 PM   #3377
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
They must have started producing 4586s again after the most recent edition was published, because SCSW definitely references only '91 to '99 for the 4586, along with 2000-02 for the 4586TSW.
Sounds like it's time for a 4th revision to the SCSW. This time with updated semi auto serial numbers.

BTW, I'm gonna be off line till early/mid October. Moving back to Alabama.

Jim
laytonj1 is offline  
Old September 16, 2010, 09:37 PM   #3378
yogiboobooranger
Junior Member
 
Join Date: April 23, 2008
Posts: 8
Smith model 60 serial number

Thanks so much Fly Fish for the info. I got the gun on a trade and after cleaning it up, I believe I made out very well.
yogiboobooranger is offline  
Old September 17, 2010, 12:22 AM   #3379
NaplesSwampRat
Junior Member
 
Join Date: September 17, 2010
Posts: 2
Model 65-1 info

Hi can anyone tell me the year of my model 65-1 i just bought? the serial number is 1D343xx . thanks if anyone can help!
NaplesSwampRat is offline  
Old September 17, 2010, 06:57 AM   #3380
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
SwampRat: 1978-79, more likely 1978.
FlyFish is offline  
Old September 17, 2010, 11:22 PM   #3381
kupantone278
Junior Member
 
Join Date: September 17, 2010
Posts: 2
S & W Model 19-3

I am recently got a model 19-3 from a good friend just for home security mostly. I was trying to do some research and found this site. Can anyone by chance tell me when this model was produced? serial # 2K32090?

Thanks in advance for your help.
kupantone278 is offline  
Old September 18, 2010, 12:31 PM   #3382
spandral
Junior Member
 
Join Date: September 18, 2010
Posts: 2
Production Date Mdl. 10

I recently was given a mdl 10, the serial number is 3393xx, can someone give me a production date.
spandral is offline  
Old September 18, 2010, 05:31 PM   #3383
jt513
Junior Member
 
Join Date: September 18, 2010
Posts: 2
I am looking for the year for my S&W pistol. It is beleived to be between 1908-1914. The serial # is 268XXX. I am not a collector and not sure if I should hold on to it or sell. Can anyone help me? It is a 32 long pearl handled.
jt513 is offline  
Old September 19, 2010, 08:41 AM   #3384
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
kupantone278: 1971

spandral: That SN isn't correct for a Model 10 - meaning a gun that has the model number stamped in the frame cutout. If a "real" Model 10 in that sense, it should have a letter somewhere in the number, most likely a "C" or "D". Take the serial number off the butt of the grip. That said, it could be a pre-Model 10, which was called the .38 Military and Police. If so, there will not be a model number stamped on the frame, and it that's the correct SN from the butt, it would have been manufactured in the 1915 (SN 241704) to 1942 (sn 700000) period.

jt513: I believe your gun must be a .32 Hand Ejector 3rd Model, manufactured between 1911 (SN 263001) and 1942 (SN 536684) - obviously more toward the beginning of that range, but no more specific info is given in SCSW. Depending on condition, it probably has a value ranging from a few hundred to perhaps several hundred dollars.
FlyFish is offline  
Old September 19, 2010, 08:44 AM   #3385
jt513
Junior Member
 
Join Date: September 18, 2010
Posts: 2
Thank you very much fr the information!
jt513 is offline  
Old September 19, 2010, 12:54 PM   #3386
spandral
Junior Member
 
Join Date: September 18, 2010
Posts: 2
Thank's FLYFISH,the sn is indeed from the butt of the grip, and the time frame would corispond, since the original owner died in 1936. It seems I have a nickle pre 10 carried by a freight conductor on the Southern Railroad.
spandral is offline  
Old September 19, 2010, 08:45 PM   #3387
kupantone278
Junior Member
 
Join Date: September 17, 2010
Posts: 2
Thanks FlyFish

I appreciate your help.
kupantone278 is offline  
Old September 20, 2010, 11:07 AM   #3388
throttlejunkey
Junior Member
 
Join Date: September 14, 2010
Posts: 3
I was given a S&W model 19-4 serial # 51k1xxx . What is the year of manufacture?
throttlejunkey is offline  
Old September 20, 2010, 12:01 PM   #3389
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Quote:
I was given a S&W model 19-4 serial # 51k1xxx . What is the year of manufacture?
1979. 19-4s were made from 1977 to 1982 - yours is pre-'82 so would be P&R (very nice).
FlyFish is offline  
Old September 20, 2010, 12:34 PM   #3390
Schutzenbob
Junior Member
 
Join Date: September 20, 2010
Posts: 11
Hi friends,

I have three S&W pistols that belong to my father (he’s 98) that I would like to get the dates of mfg. if possible, all three are caliber 22 Long Rifle.

#1 is a 22-32 Target with 6” barrel and has been ridden hard and put away wet, serial # 245xxx.

#2 is also a 22-32 Target with a 6” barrel and is in almost new condition, serial # 496xxx.

#3 is a K-22 with a 6” barrel in new condition and I believe that the original box is around here somewhere, serial # K257x (there are only 4 numbers).

Bob
Schutzenbob is offline  
Old September 20, 2010, 01:19 PM   #3391
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Quote:
I have three S&W pistols that belong to my father (he’s 98) that I would like to get the dates of mfg. if possible, all three are caliber 22 Long Rifle.

#1 is a 22-32 Target with 6” barrel and has been ridden hard and put away wet, serial # 245xxx.

#2 is also a 22-32 Target with a 6” barrel and is in almost new condition, serial # 496xxx.
The information on manufacturing date for these guns in SCSW is that the range is from 1911 (SN 160000) to 1941 (SN 536684). There is a good bit of discussion of the history of the .22 revolver built on the .32 frame, and some additional info on specific features that sort-of allows some narrowing of that range. For example, recessed chambers reportedly began in 1935, but nothing that's really definitive. These features also affect the collector value considerably.

Quote:
#3 is a K-22 with a 6” barrel in new condition and I believe that the original box is around here somewhere, serial # K257x (there are only 4 numbers).
That one's easier: 1947.
FlyFish is offline  
Old September 20, 2010, 01:38 PM   #3392
throttlejunkey
Junior Member
 
Join Date: September 14, 2010
Posts: 3
FlyFish, thank-you for the response. Question P&R? Aprox value?
throttlejunkey is offline  
Old September 20, 2010, 02:09 PM   #3393
Schutzenbob
Junior Member
 
Join Date: September 20, 2010
Posts: 11
Thank you Flyfish,

The only folks from Massachusetts that I’ve ever heard from are you and Steve Earl, and I think Walnut Hill range is in Massachusetts too.

Both the 22-32’s have the flat “non recessed” cylinder.

Bob
Schutzenbob is offline  
Old September 20, 2010, 02:20 PM   #3394
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
throttlejunkey -

"P" refers to a "pinned" barrel - prior to 1982, S&W revolver barrels, in addition of course to being screwed solidly into the frame, were secured with a cross-pin at the top of the barrel just forward of the forcing cone area.

"R" refers to "recessed" or "counterbored" cylinders - again prior to 1982, S&W magnum and rimfire caliber revolvers (only) had chambers that had a counterbored area that fully enclosed the case head.

You can see photos of both features, along with other S&W identifying characteristics, here.

Although both the pinned barrel and counterbored cylinder were probably not necessary for their intended purposes (preventing the barrel from loosening, and protecting the shooter in the event of a case head rupture, respectively) - after all, the celebrated Colt Python has neither - they are a reminder of a time when keeping production costs down wasn't the Holy Grail that it is today. Accordingly, and in spite of the fact that there is really no practical reason for it, many S&W enthusiasts (including this one) prefer to own P&R revolvers if possible, and that drives the value of them up a bit.
FlyFish is offline  
Old September 20, 2010, 02:27 PM   #3395
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Schutzenbob -

Yes, there are a few of us gun enthusiasts remaining up here in the Democratic People's Republic - sadly, fewer every year as the left-wing dictatorship we have as an excuse for a state government continues to make it more difficult to be a gun owner. Especially ironic given that I can easily drive over to the S&W factory and back in an afternoon.

I wasn't familiar with the name "Walnut Hill Range" so I looked it up. Turns out that's the old name for what's now referred to as the Massachusetts Rifle Association in Woburn, about 25 miles or so north and a bit west of Boston - said to be the oldest gun club in the country. I'm not personally familiar with it, but know many folks who shoot there.

Dick
FlyFish is offline  
Old September 20, 2010, 02:30 PM   #3396
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
throttlejunkey: Sorry, you were also looking for a value estimate. That depends a lot on condition, but if your gun is in good shape with something better than 90% of its original blueing you're probably looking at something in the $500 to $600 range. Model 19s are very popular, and justifiably so.
FlyFish is offline  
Old September 20, 2010, 03:23 PM   #3397
throttlejunkey
Junior Member
 
Join Date: September 14, 2010
Posts: 3
FlyFish, it's actually Nickel, quite nice. Thanks
throttlejunkey is offline  
Old September 20, 2010, 03:57 PM   #3398
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
I'll bet it is. I don't believe I've ever seen a nickel 19, though that was a standard option during their period of production. The book doesn't indicate there's any price premium for nickel, but it must be nice.
FlyFish is offline  
Old September 21, 2010, 09:33 PM   #3399
Flip
Member
 
Join Date: November 25, 2001
Posts: 26
Any date info on a model 36 square butt, serial 1J3XXXX? Any idea if it would be safe for occasional +P loads such as the 135 grain Golddot cartridge?
Flip is offline  
Old September 21, 2010, 09:41 PM   #3400
pedgarcia
Junior Member
 
Join Date: September 21, 2010
Posts: 3
mod19-5 year

could you tell me the year of maufacture of a Mod 19-5 # 226Kxxx please
pedgarcia is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:45 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.47362 seconds with 9 queries