The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools Search this Thread
Old October 19, 2019, 01:38 AM   #1
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 6,871
MOssberg 500, 18" bbl and rifle sights?

I saw an older Mossberg 500 in a shop the other day with an 18 or 18.5" bbl and RIFLE sights, much like what Mossberg put on the "Slugster" back in the day. But I never saw a Slugster with athat short a tube, though all of them were 24" guns.

The rear was a folding leaf dovetailed into the barrel, the front blade on a raised ramp, all very neat and tidy. I did not find any choke markings on the barrel to indicate it had been cut and the sights installed later. The appearance was that it was a factory job, but of course, I sure could be wrong.

Anybody seen a vintage, wood stocked Mossberg 500 with 18" RS barrel before???
bamaranger is offline  
Old October 20, 2019, 07:15 PM   #2
treg
Senior Member
 
Join Date: November 26, 2006
Posts: 1,092
I have an OEM 18" RS slug barrel that screws right on to my WS circa 1982 M500.
__________________
.44 Special: For those who get it, no explanation is necessary. For those who don't, no explanation is possible.
treg is offline  
Old October 21, 2019, 09:05 PM   #3
Auto5
Senior Member
 
Join Date: March 18, 2013
Location: Chicago suburbs
Posts: 632
I have one on my 500 when it's in home defense mode. I picked it up a few years back on sale from one of the big parts houses. It has a matte finish. It's a smooth slug barrel with rifle sights. Mine came with the dovetail cut, but I added the folding leaf.
__________________
At the young age of five, a bear told me that I was the only person who could prevent forest fires. Why I was chosen, I'll never know.
Auto5 is offline  
Old October 22, 2019, 03:11 AM   #4
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 6,871
so.....

OK, so Mossberg DID make factory RS equipped short, 18" or so bbl. I'd never seen one before. I need to swing back by that shop and make the guy an offer.
bamaranger is offline  
Old October 23, 2019, 12:39 AM   #5
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 6,871
WS??????

What is WS??????
bamaranger is offline  
Old October 23, 2019, 08:09 AM   #6
Doyle
Senior Member
 
Join Date: June 20, 2007
Location: Starkville, MS
Posts: 7,035
Ranger, I think that is the kind of barrel I mentioned in an earlier thread as being the basis of a good turkey barrel. It would need to be smooth bore and not rifled. It would also need to have enough meat in the barrel wall thickness at the muzzle to be tapped for a choke tube.
Doyle is offline  
Old October 27, 2019, 07:20 PM   #7
treg
Senior Member
 
Join Date: November 26, 2006
Posts: 1,092
WS =Wood Stock

__________________
.44 Special: For those who get it, no explanation is necessary. For those who don't, no explanation is possible.
treg is offline  
Old October 28, 2019, 11:47 AM   #8
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 6,871
got it

OK, wood stock...check.

Doyle, my main turkey shotgun is indeed a short barreled, rifle sighted pump. Quite a few years ago, (at least 20) I put a 20" rifle sighted, smooth bored slug barrel on my Rem 870, and then screwed in a Rem turkey choke. It has been a fine performer over many years. The gun is lighter, and shorter, handy in a blind and easy in the hand when holding for a bord. The only problem these days is my plus 60 yr old eyes will not run the bead and notch sights so well, so I have experimented with other sight options.

My interest in the rifle sighted Mossberg is two fold. One; I'd never seen a factory 18" tube with RS from that company, but it appears one indeed was manufactured in years past. Two; the Mossberg (?) sights on that gun had a very broad and open sight blade/post pattern that I could manage a bit better than a bead and notch. I'd use it as SD/truck/trunk/boat gun with buckshot.

I'll add for conversations sake, that Remington made a rifle sighted 18" barrel in their LE line that may or may not be available to the commercial market. The 'Trace had several.
bamaranger is offline  
Old October 28, 2019, 12:47 PM   #9
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 11,477
"...an 18 or 18.5" bbl and RIFLE sights..." A Parkerized, 18.5", Heavy-Walled, Security barrel with three-dot sights runs $275.00. That's just the barrel. Might be one of 'em.
They made a 20", 8 round, riot gun that would take an M-15 bayonet, long ago, too.
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old October 28, 2019, 06:33 PM   #10
AK103K
Senior Member
 
Join Date: May 1, 2001
Posts: 9,967
I have one I bought back in the late 70's. I think the barrel is 20" though. It holds 8.

Its a Mod. 500 ATP. Gun is parked with an oiled wood stock and forearm. Rifle sights as described. Ive actually had to replace the folding rear leaf a couple of times over the years as they are fairly fragile and break pretty easy. The barrel is a smooth bore with OC choke.

I paid around $150 for it new back then and its bounced around in most all of my work and play trucks over the years and hunted with a good bit. Generally used, abused, and mistreated, and always seemed to shrug it off. Right now, its sorta retired and been sitting in a closet next to me for a little over a decade. Still there and always ready.
AK103K is offline  
Old October 29, 2019, 01:30 AM   #11
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 6,871
more

The Mossberg I saw was an 18" or 18.5 barrel for certain, 5+1, with wood stock and forearm. It may have been hardware store marked and could very well have been from the 70's.
bamaranger is offline  
Old October 29, 2019, 07:54 AM   #12
AK103K
Senior Member
 
Join Date: May 1, 2001
Posts: 9,967
This is mine (on top). I just measured the barrel, and its 20.5".



This is what it looked like before I painted it.
AK103K is offline  
Old October 29, 2019, 11:36 PM   #13
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 6,871
slot

I see the empty dovetail slot. Front sight looks the same. Supposed to rain for the next two days, I hope to swing by that shop and make them an offer.

For some reason I have been all about stubby shotguns lately.
bamaranger is offline  
Old October 30, 2019, 08:23 AM   #14
AK103K
Senior Member
 
Join Date: May 1, 2001
Posts: 9,967
Yea, the rear sight was gone in that pic. Its since been replaced. They are actually pretty flimsy and they could have done better there.

Ive owned a number of Mossbergs over the years, and their shotguns seem to be their niche. Good, solid workhorses and usually at reasonable prices.

Not a fan of their current rifles so much, but their older .22 target rifles were good shooters. Had a few of them as well over the years.

If what youre looking at doesn't pan out, I recently picked up a Lynx-12 AK shotgun. Its a keeper, and quickly becoming my favorite of the shotguns I have of the type. Mag fed, fast and easy shooting, whats not to like?
AK103K is offline  
Old November 5, 2019, 01:58 AM   #15
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 6,871
got it

I swung by the shop, the shotgun had been moved from a rack deep in the shop to a rack up front to enhance the chance of a sale I reckon. Some banter with the owner, he offered $168 out the door. Add a 25 ct box of 12 pellet /00 buck, $180 bucks. I believe I did OK.

Checked zero of the rifle sights with slugs.... centered on a paper plate at 50 yds no adjustments necessary. Off bags from a rest, with full power slugs the gun is a kicker ,no recoil pad. I likely will not add one either as I like the trim looks, and the LOP seems about right for me. There is no provision for a rear sling shackle, there is a threaded hole up on the ring of the mag tube for a shackle up front, but none present. The forearm and wrist of the butt stock have a diamond pattern pressed checkering, the wood is a darkly stained birch (I think). The safety button is metal, with a bit of a swell forward to catch the thumb and a nice touch, ahead of the plastic number on today's Mossbergs.
I like the little gun very much.
bamaranger is offline  
Old November 5, 2019, 10:29 AM   #16
hdbiker
Senior Member
 
Join Date: December 19, 2012
Posts: 223
I bought a Mossberg 500 in woodland camo, 24 inch ported, vent rib,multiple choke barrel for turkey, small game hunting years ago. I put fiber optic sights on the rib. With the modified choke it shoot slugs very good too. hdbiker
hdbiker is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09289 seconds with 10 queries