|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
February 2, 2007, 12:08 PM | #1 |
Senior Member
Join Date: August 28, 1999
Posts: 201
|
What's up with Accurate powders?
I heard a story about the new Accurate powders being a little different in charge weights and went to check on it on the web. Seems that the web domain is pending. Is Western combining them?
The reason I was checking is that I heard of a gun damage incident involving a 115 grain Hornady bullet while using a new canister of #2 and the loading density having been lowered. I use #2 and Hornady bullets for all my pistol loading and was wondering if my new canister is quite a bit different than the older product. (Both mine still say N0.2 Improved and are out of McEwen TN and are a product of the Czech Republic. Any information on this? |
February 2, 2007, 03:17 PM | #2 |
Senior Member
Join Date: December 23, 2005
Location: Minnesota
Posts: 2,952
|
I had no trouble accessing Accurates load data.
http://accuratepowder.com/reloading.htm |
February 2, 2007, 03:56 PM | #3 |
Senior Member
Join Date: August 28, 1999
Posts: 201
|
Finally got a hold of Accurate via phone and the website problems with domain should be fixed today. Phone number is 406-234-0422
The formulation of #2 Improved is unchanged according to the gentleman I spoke with. |
February 2, 2007, 11:20 PM | #4 | |
Senior Member
Join Date: December 23, 2005
Location: Minnesota
Posts: 2,952
|
Quote:
What exactly do you mean, "problems with domain"?? I have been using AA's web site load data for years and have never seen it down or interrupted. You have me a bit confused. |
|
February 3, 2007, 08:47 AM | #5 |
Senior Member
Join Date: August 28, 1999
Posts: 201
|
Steve, Sometime between the time I posted and you posted Accurates Web Domain had been shut-off and this was the message displayed when you typed www.accuratepowder.com or www.accuratearms.com in the addy bar and entered the command.
I was happy that after you posted it had worked for me also. They explained at the factory that it was indeed a problem and they were working to get it back online that day. Last edited by CHAINSAW; February 3, 2007 at 08:49 AM. Reason: spelling |
Thread Tools | Search this Thread |
|
|