May 3, 2018, 02:01 PM | #1 |
Senior Member
Join Date: April 27, 2009
Location: Texas
Posts: 399
|
Pawnshop remingtons
870 12 guage magnum 2 3/4 - 3 shells with remchoke. The barrel is gloss like a Wingmaster.
They are asking $249 11-87 Sportsman? 12 guage with remchoke. They are asking 499 I really want a Wingmaster 870 12 with remchoke. What’s the difference between the Wingmaster and the Magnum. I already know I can get at 50-75$ off the asking price for these two. I want an all around hunting Remington for Deer, Hog and turkey. I only hunt the public land near me and the FS only allows black powder or shotgun. |
May 3, 2018, 03:22 PM | #2 |
Senior Member
Join Date: February 28, 2008
Location: Michigan
Posts: 2,619
|
What are the stocks made of, walnut or plastic?
How is the receiver finished, polished or a blasted matt finish? Is the barrel marked lite contour? When you cycle the action how does it sound, very smooth or gritty? How much does it weigh, a standard WM comes in at about 7 pounds? |
May 3, 2018, 03:36 PM | #3 |
Senior Member
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,303
|
magnum
I think the "Magnum" and the Wingmaster are likely the same guns. My vintage 870, bought in 1980, is marked MAGNUM Wingmaster. The old gun is pre Remchoke, and in those days, one could order either 3" chamber, or simply 2-3/4" About a decade later, we had several Rem 870 pumps simply marked "Magnum" at work, those guns would take either 2-3/4" or 3" shells, which became standard across the industry. But it wasn't always that way. Note that those "Magnum" marked guns were NOT 870 Express marked.
The only Rem 870 I would hesitate on would be those marked "Express". Understand, their are many satisfied users of 870 Express guns, (I had one in .410 w/o complaint) but I believe there are some production shortcuts in the Express line beyond the matte finish. I cannot name the difference, as I am far from educated on the 870, but I believe the "Magnum" marked guns are still of Wingmaster quality, and pre- "Express" models the pricepoiont version. There are folks sharper than me on this, we will likely hear from them. |
May 3, 2018, 03:49 PM | #4 |
Senior Member
Join Date: April 27, 2009
Location: Texas
Posts: 399
|
The 870 was marked with just 870 Magnum taking 2 3/4 as well as 3 inch shells and the slide felt smooth like my 16 Wingmaster. The stock appeared to be plastic wood maybe. Not that nice stock known to Wingmasters. I didn’t look super close at the receiver but it wasn’t the flat matte like on the express.
The 11-87 had the nice wood but with the matte rough receiver like the express. I was real short on time so I didn’t look as close as I wanted because my wife was waiting in the car and you know what that means. |
May 3, 2018, 05:16 PM | #5 |
Senior Member
Join Date: February 22, 2008
Location: SW Washington state
Posts: 2,011
|
The 870 12 gauge sounds like a smokin good deal. Easy to find a wood stock if you like, and you could sure afford one at that price.
Barrel length? Would be ideal if 26-28 for a field gun.
__________________
ricklin Freedom is not free |
May 3, 2018, 05:39 PM | #6 |
Senior Member
Join Date: April 27, 2009
Location: Texas
Posts: 399
|
Just went back and looked at it. It is a Wingmaster.
|
May 3, 2018, 06:06 PM | #7 |
Senior Member
Join Date: February 28, 2008
Location: Michigan
Posts: 2,619
|
Great that it is a Wingmaster, better if you can get a few $$ off.
The biggest problem with the 870's is exactly what model you have. There are so many different variations that Remington put together over the years and the different models from year to year. Mine is a 1996 and there are at least 50 different ways Remington put the gun together. You can not go wrong with the 870 Wingmaster! |
May 3, 2018, 06:12 PM | #8 |
Senior Member
Join Date: February 16, 2006
Location: IOWA
Posts: 8,783
|
I'm seeing a good deal
If it's a Wingmaster, it will say so, on the receiver. The Magnum rating refers to the acceptance of the 3" shells. I'm only going by my experience and sure wish I had some pictures to look at. .....
Be Safe !!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing. |
May 3, 2018, 06:16 PM | #9 |
Senior Member
Join Date: April 27, 2009
Location: Texas
Posts: 399
|
It says Wingmaster in the side just checked. Now I’m trying to throw some funds together to get it tomorrow. I’m going to sell my Wingmaster 16. I got it at a pawnshop last year for $130
|
May 3, 2018, 06:21 PM | #10 |
Senior Member
Join Date: February 28, 2008
Location: Michigan
Posts: 2,619
|
My 96 has Remington Model 870 engraved on the receiver's left side along with
other engraving. I could not find "Wingmaster", very nice stock set with cut checkering. The serial number on the receiver does end with a "M". |
May 3, 2018, 06:27 PM | #11 | |
Senior Member
Join Date: February 16, 2006
Location: IOWA
Posts: 8,783
|
Could be ???
Quote:
Be Safe !!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing. |
|
May 3, 2018, 06:31 PM | #12 |
Senior Member
Join Date: April 27, 2009
Location: Texas
Posts: 399
|
It says 870 Magnum on one side and Wingmaster on the other side. I'm gonna ask them if they'll take $200 cash for it.
It has vent ribs with 2 beeds, screw in chokes, and takes 3' shells. I looked down the barrel and opened the action and there are very few blemishes. |
May 3, 2018, 07:21 PM | #13 |
Senior Member
Join Date: February 28, 2008
Location: Michigan
Posts: 2,619
|
The "M" indicates 3inch magnum.
|
May 4, 2018, 06:44 AM | #14 |
Senior Member
Join Date: June 16, 2005
Location: AZ
Posts: 3,113
|
Nice find. I hope it's still there when you get back!
I've found that one of the rules for shopping at pawn shops is that you can't hesitate. I've missed out on some cool stuff by deciding to come back the next day. |
May 4, 2018, 06:54 AM | #15 |
Senior Member
Join Date: February 28, 2008
Location: Michigan
Posts: 2,619
|
Chance's are he will have a very nice shotgun setting in his safe tonight.
Many of today's buying crowd want's no glare sandblasted finish with those ugly plastic stocks. Must not forget extended magazine holding extra shells, a flashlight and red dot laser sight. |
May 4, 2018, 07:26 AM | #16 | |
Senior Member
Join Date: April 14, 2009
Location: Florida
Posts: 668
|
Quote:
I can educate you. The express failures are 2 fold: 1) Poorly finished barrels result in jams. Rough chambers are a bear. But easily fixed with a flex hone and less than a minute of polish. There are a few other methods. But probably not as effective. 2) MIM extractors. Machined extractors suck. Better to have a non MIM which can be found in older guns. Sent from my iPhone using Tapatalk |
|
May 4, 2018, 08:19 AM | #17 |
Senior Member
Join Date: February 28, 2008
Location: Michigan
Posts: 2,619
|
You mentioned the poorly finished barrels. I've seen a write-up about extraction problems can come from rough machining on the barrel extension.
The rim of the fired shell will hangup on the rough cuts left behind by the cutters. I often say they call the gun "Express" because it is how fast they can make it! |
May 4, 2018, 12:16 PM | #18 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
The "Magnum" and the Wingmaster are the same guns. Difference is the fit and finish. Mostly the finish. High gloss bluing and stocks on the Wingmasters. Not so highly polished on lower end kit. Same gun though.
They all take the same barrels(Including Express 870's) so you can put a slug/fully rifled barrel on for deer in the early morning. Change barrels and hunt upland birds until the afternoon stint in the deer blind. MIM parts are not in any way inferior to any other part.
__________________
Spelling and grammar count! |
May 4, 2018, 12:26 PM | #19 |
Senior Member
Join Date: April 27, 2009
Location: Texas
Posts: 399
|
Picked it up first thing this morning when they opened. Not a scratch or rust spot on it. All of the bluing is there. Except for some very tiny almost unnoticeable dings on the wood the gun appears to be bran new.
Its a 870 Wingmaster Magnum 12 with RemChok manufactured in 1989. got it for $200 cash out the door. |
May 4, 2018, 02:29 PM | #20 |
Senior Member
Join Date: April 27, 2009
Location: Texas
Posts: 399
|
Here’s a few more
Last edited by cloud8a; May 4, 2018 at 02:39 PM. |
May 4, 2018, 02:58 PM | #21 |
Senior Member
Join Date: February 11, 2012
Location: Williamsburg, Va.
Posts: 1,528
|
You did REAL good.
__________________
What could have happened... did. |
May 4, 2018, 03:52 PM | #22 | |
Staff
Join Date: July 28, 2010
Location: Arkansas
Posts: 8,821
|
Quote:
__________________
I'm a lawyer, but I'm not your lawyer. If you need some honest-to-goodness legal advice, go buy some. |
|
May 5, 2018, 02:19 AM | #23 |
Senior Member
Join Date: June 16, 2005
Location: AZ
Posts: 3,113
|
And it has a ventilated rib too!
Very nice! |
May 5, 2018, 04:03 AM | #24 |
Senior Member
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,303
|
nice
Yes, that is a very nice Remington indeed. And $200 bucks......a steal, easily worth twice that......vent rib, a very nice option.
These days, with the emphasis on tactical shotguns, and turkey guns coming in at about 24", it is a nice change to see a game gun with full length barrel. Which leads me to next question, how long is the barrel on your new gun. NOte, measure from the bolt face. |
May 5, 2018, 10:08 AM | #25 |
Senior Member
Join Date: April 27, 2009
Location: Texas
Posts: 399
|
From the boltface it measures 28 inches. I don’t really have much care for tactical matte metal shotguns. I don’t care for the black synthetic stocks with lasers. I have a S&W AR that fulfills that.
I’m more attracted to the shotguns that are almost like a work of art. Nice carved and checkered wood and clean glossy blue. Something that looks good laying next to the colors of downed game. |
|
|