The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old November 7, 2010, 07:57 PM   #3551
Coug
Member
 
Join Date: July 13, 2000
Location: E. Wa
Posts: 36
4in 66 (no dash)

I have a 4in mdl 66 no dash square butt that I picked up for $300 about 10yrs ago. I hoped that someone could help me put a date on it.

The sn is 9K242xx.

Thanks for all your help.

-Coug
Coug is offline  
Old November 7, 2010, 08:14 PM   #3552
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
The sn is 9K242xx.
9K10001 to 9K99999 = 1976.

Jim
laytonj1 is offline  
Old November 7, 2010, 08:58 PM   #3553
Coug
Member
 
Join Date: July 13, 2000
Location: E. Wa
Posts: 36
Thanks for the info! I was actually kinda hoping for that year.

-Coug
Coug is offline  
Old November 8, 2010, 12:20 AM   #3554
Paul Bivins
Junior Member
 
Join Date: October 28, 2010
Location: USA
Posts: 3
Paul

38 snub nose S 947942 looking for information whether I have a rarity or not. And I would like to know the value, I'ts somewhere between 95% to 97%. It has a little rust pits on the cyl. It has the long cocking firing hammer, I understand it was carried by an uncle during WW!! who was in the Navy. At the moment it has Pearl Handles. It was a gift to me.
Paul Bivins is offline  
Old November 8, 2010, 08:49 AM   #3555
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
Assuming 6-shot and .38 Special caliber, it's a .38 Military and Police (pre Model 10) that was made shortly after the war - the serial number range was S811338 in 1945 to S999999 in 1948. I'm not sure it qualifies as a "rarity," but SCSW does indicate that 2" barrels in this model add a 25% premium to the value.
FlyFish is offline  
Old November 8, 2010, 09:30 AM   #3556
TonyAR308
Senior Member
 
Join Date: December 24, 2008
Location: Southwest Virginia
Posts: 102
Model 40

A friend of mine is wanting to sell a S&W Model 40 SN 6XXX. Can someone please date this for me and possibly give me a value. The gun is approximate90% condition. It was used by LE so the only real wear is from a holster on the barrel end and it has obviously been shot but is otherwise in great condition for its apparent age. Thanks in advance.

Tony
TonyAR308 is offline  
Old November 8, 2010, 10:35 AM   #3557
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
First, be sure you've got the right serial number - take it from the butt of the grip frame. With a short number and no letter prefix, it's possible to get it confused with "assembly numbers" that also appear on the gun.

Assuming that your friend's Model 40 does has a 4-digit SN starting with 6, it would be from the 1952 (SN 1) to 1971 (SN 30160) period. Interpolating would give a date of 1956-57, which is only an estimate, so the gun would appear to be from right around when S&W started assigning model numbers to its revolvers (1957). If it does have the model number stamped in the yoke cutout then it's from then or a bit later. The Model 40 was originally called the Centennial because it was introduced on S&W's 100th birthday as a company.

Because of the grip safety, which is an unusual feature as part of the hand ejector design and was not retained when the same basic gun was re-introduced some years later, Model 40s are somewhat more valuable than similar J-frames. In the condition you describe, I'd estimate it's somewhere in the $500 range, perhaps a bit more.
FlyFish is offline  
Old November 8, 2010, 11:37 AM   #3558
TonyAR308
Senior Member
 
Join Date: December 24, 2008
Location: Southwest Virginia
Posts: 102
The 4 digit number was from the bottom of the grip as well as from the cylinder and bottom of the barrel. There is no model number on the gun, I just derived the model number from other searches and guns that are for sale on other sites. I don't necessarily trust the prices on auctions since there is no way to know what they will actually sell for. Thanks for the help..
TonyAR308 is offline  
Old November 8, 2010, 11:58 AM   #3559
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
Ah, OK. So that would make it a Centennial (pre-40), most likely from just before the model numbering system was implemented. Very nice - I suspect your friend will be able to sell it easily.
FlyFish is offline  
Old November 8, 2010, 11:21 PM   #3560
HTSI
Junior Member
 
Join Date: November 8, 2010
Location: Everett
Posts: 3
I have what I think is a Model 640 S/N CDZ4XXX.

It is a 2 1/8" Stainless Steel .357 Magnum Enclosed Hammer 5-shot revolver. What I am looking for is approximate age and value.

TIA
__________________
Jim

USN Retired
Everett, WA
HTSI is offline  
Old November 9, 2010, 07:49 AM   #3561
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
HTSI - CDZ sn prefix would make it 2000. In good condition, value is probably around $400 - $450.
FlyFish is offline  
Old November 9, 2010, 11:27 AM   #3562
WE0H
Member
 
Join Date: May 16, 2010
Location: Minnesota
Posts: 71
Recently my wife bought me this S&W 32. S/N 1866xx, 3-1/2" blue Safety Hammerless.



What is a approximate manufacture year and rough guess value? I really need to get that letter from S&W when I get the funds for that.

Thanks much,
Mike
WE0H is offline  
Old November 9, 2010, 12:02 PM   #3563
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
Mike - You've got a .32 Safety Hammerless 3rd Model, manufactured from 1909 (SN 170000) to 1937 (SN 242981). You can interpolate to get close to the actual year, but there's no more definitive info in SCSW. You might be able to get a year by calling S&W, but otherwise it'll cost $50 for the factory letter.

With regard to value, the gun appears to be in amazingly good shape, although it's always difficult to tell from a photo. If it's not a reblue, it's probably worth several hundred dollars or more.
FlyFish is offline  
Old November 9, 2010, 02:38 PM   #3564
WE0H
Member
 
Join Date: May 16, 2010
Location: Minnesota
Posts: 71
Cool, thank you much for that info. Here are more pictures. The bluing looks original. It matches the bluing on my 586-2 which I bought new.

Note the scratch & holster wear.




Side plate is really jet black. Strange lighting effect with the camera.


Wear on the butt from the hands I presume.


The bore & cylinder is shiny as a new gun would be inside. The action is drum tight like my 586 is. I don't think it was shot much. The gun was listed at $400 and I got them to knock off 10% so it was $360 plus tax to total $380 out the door. Surprisingly it was my wife's idea to buy it for me I am retired so I tend to pass on more expensive purchases.

Mike
WE0H is offline  
Old November 9, 2010, 03:43 PM   #3565
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
Yeah, I agree the bluing looks original. Wow - what a great deal. Although I'm really at the edge of my knowledge with a gun like this, from the photos I'd say it's in excellent to excellent+ condition, which SCSW values at $475 and $600, respectively, and prices have climbed considerably in the five or so years since the book was published.
FlyFish is offline  
Old November 9, 2010, 04:14 PM   #3566
jonbondave
Junior Member
 
Join Date: June 3, 2008
Posts: 2
Hi

I just aquired a S&W Model 19-2, in prety decent condition, I was wondering if anyone could help me with year of manufacture S/N K589***. Thanks!
jonbondave is offline  
Old November 9, 2010, 04:26 PM   #3567
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
Quote:
I was wondering if anyone could help me with year of manufacture S/N K589***.
1964 - the range that year was K555000 to K605877.
FlyFish is offline  
Old November 9, 2010, 04:34 PM   #3568
jonbondave
Junior Member
 
Join Date: June 3, 2008
Posts: 2
nice, thanks a ton mate!
jonbondave is offline  
Old November 9, 2010, 06:48 PM   #3569
WE0H
Member
 
Join Date: May 16, 2010
Location: Minnesota
Posts: 71
Dang, I was figuring in excess of $400 when I was searching while at the store as the wife was asking is it worth it? Talk about stress as I did not want to walk away from that gun. Now it sounds like it was a darn good deal, whew

Thank you much for the research today

Mike
WE0H is offline  
Old November 10, 2010, 02:00 AM   #3570
HTSI
Junior Member
 
Join Date: November 8, 2010
Location: Everett
Posts: 3
Model 640

FlyFish,

Thanks for the info.
__________________
Jim

USN Retired
Everett, WA
HTSI is offline  
Old November 10, 2010, 01:24 PM   #3571
Rocked
Senior Member
 
Join Date: September 26, 2006
Location: North Florida
Posts: 152
How about a model 36 serial J1372XX?
Rocked is offline  
Old November 10, 2010, 02:58 PM   #3572
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
Quote:
How about a model 36 serial J1372XX?
1973 - 1974. The range was J100000 to J250000 over those two years, so 1973 would be more likely.
FlyFish is offline  
Old November 10, 2010, 08:05 PM   #3573
The Book
Member
 
Join Date: November 4, 2010
Location: Eastern Ks
Posts: 72
Thanks for the info on my Dads 38. Really nice bunch on here
The Book is offline  
Old November 11, 2010, 07:16 AM   #3574
Bodaver32
Junior Member
 
Join Date: November 11, 2010
Posts: 2
.38 with serial #833214

Hello,

I have a .38 S&W Ctg. six shot with a 4" barrel. The serial number on the butt and face of the cylinder is 833214. There are no letters preceeding the number.

The gun is missing the front site and a screw on the side. Any ideas on where I cound such parts. I have searched most of the major online parts suppliers.

On the butt of the frame it almost looks like the frame was drilled for a butt swivel, butt the hole was filled (professionally) and finished. And on the frame there is a crossed drilled hole that lines up with the "filled" hole.

Thanks for any help you can provide.

Greg
Bodaver32 is offline  
Old November 11, 2010, 08:21 AM   #3575
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
Greg -

Based on your description and the serial number, you have a .38 Military & Police Model of 1905 - 4th Change, usually simply called a .38 M&P. It was manufactured during the war years, between 1940 and 1945. This is the gun that evolved into the Model 10 in 1957 when S&W started assigning model numbers, and so it's sometimes called a "pre-10" even though, strictly speaking, it's the post-war M&Ps that are properly called pre-10s.

The drilled hole in the butt indicates that a lanyard loop was attached at one time. The crosswise hole in the same location is most likely where a small pin, called the stock pin, was fitted to help position and secure the stocks (grips).

These guns were made in large numbers, and many parts are still available. The pin and screw shouldn't be a problem (Numrich lists them); the front sight may take a bit more searching but, if you can't find one, a replacement could be made and fitted by a competent gunsmith without excessive cost. You might want to try calling S&W Customer Service and seeing what advice they might have.
FlyFish is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.85586 seconds with 9 queries