Does anyone make an 870 mag tube ext clamp with a sling attachment point?

DBR · January 13, 2005, 11:13 PM

I want to put a sling on my 870 without stressing the mag tube cap. So I am looking for a clamp that would put the sling load on the barrel.

444 · January 13, 2005, 11:36 PM

Choate Machine & Tool, Inc.
Sling Swivel Base Clamp Kit

DBR · January 14, 2005, 12:08 AM

444
Thanks for the info but, I am looking for a bottom sling swivel mount if such exists.

Ozzieman · January 14, 2005, 05:53 AM

They are a very good company, at one time the sent me to another company becouse they diddnt have what I was looking for. They might be able to help.

http://www.uws.com/CHOATE/HomePage.html

9mmMike · January 14, 2005, 09:10 AM

The Factory?

GunsnRovers · January 14, 2005, 11:22 AM

The best two I have seen are the Vang and Wilson.

The Vang part can be used swaped right or left handed, but not down.

The Wilson part has to be ordered right, left, or down.

Both come in 1 or 2 round configuration.

DBR · January 14, 2005, 04:27 PM

Thanks for the feedback guys. I think I am going to use the Wilson +1 QD extension. It is long enough to add a regular mag extension tube clamp. That should keep the sling from prying on the end of the mag tube. Not a cheap solution however.

January 13, 2005, 11:13 PM	#1
DBR Senior Member Join Date: December 14, 2001 Location: Vermont Posts: 101	Does anyone make an 870 mag tube ext clamp with a sling attachment point? I want to put a sling on my 870 without stressing the mag tube cap. So I am looking for a clamp that would put the sling load on the barrel.

January 13, 2005, 11:36 PM	#2
444 Senior Member Join Date: November 20, 2000 Location: Ohio Posts: 3,968	Choate Machine & Tool, Inc. Sling Swivel Base Clamp Kit __________________ You know the rest. In the books you have read How the British Regulars fired and fled, How the farmers gave them ball for ball, From behind each fence and farmyard wall, Chasing the redcoats down the lane, Then crossing the fields to emerge again Under the trees at the turn of the road, And only pausing to fire and load.

January 14, 2005, 05:53 AM	#4
Ozzieman Senior Member Join Date: December 14, 2004 Location: Northern Indiana Posts: 6,117	You can contact CHOATE and ask, They are a very good company, at one time the sent me to another company becouse they diddnt have what I was looking for. They might be able to help. http://www.uws.com/CHOATE/HomePage.html

January 14, 2005, 09:10 AM	#5
9mmMike Senior Member Join Date: January 6, 2000 Location: SE PA Posts: 1,049	The Factory? __________________ "Freedom is not free" Visit TheRallyPoint.org TheRallyPoint at LRGC- Saturday August 26th IF YOU LIVE IN PA AND DID NOT VOTE, YOU DESERVE TO LOSE YOUR GUNS!

January 14, 2005, 11:22 AM	#6
GunsnRovers Senior Member Join Date: June 25, 2002 Location: Lost Angeles Posts: 781	The best two I have seen are the Vang and Wilson. The Vang part can be used swaped right or left handed, but not down. The Wilson part has to be ordered right, left, or down. Both come in 1 or 2 round configuration. __________________ Jeff The reason we're all here is that we're not all there.

January 14, 2005, 12:08 AM	#3
DBR Senior Member Join Date: December 14, 2001 Location: Vermont Posts: 101	444 Thanks for the info but, I am looking for a bottom sling swivel mount if such exists.

January 14, 2005, 04:27 PM	#7
DBR Senior Member Join Date: December 14, 2001 Location: Vermont Posts: 101	Thanks for the feedback guys. I think I am going to use the Wilson +1 QD extension. It is long enough to add a regular mag extension tube clamp. That should keep the sling from prying on the end of the mag tube. Not a cheap solution however.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search