The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools Search this Thread
Old March 16, 2020, 09:02 AM   #1
JLK
Senior Member
 
Join Date: October 1, 2001
Posts: 133
Remington 700 stock

Please share any experience with stocks for a Remington 700.
Looking at
Bell and Carlson
Magpul Hunter 700
Hs precision

Thanks
__________________
Rsrc
JLK is offline  
Old March 16, 2020, 01:46 PM   #2
GeauxTide
Senior Member
 
Join Date: April 20, 2009
Location: Helena, AL
Posts: 3,887
I have two B&C Left Hand (280 & 7mmRM) and two Magpul Hunter (243 & 308). All shoot 1/2" or better with select handloads. The Hunters are heavier with the full length tin rail and are heavier. The stock design of the B&C (BDL Sporter) makes full load from the 280 and 7Mag comfortable.
GeauxTide is offline  
Old March 16, 2020, 03:05 PM   #3
KROIL
Senior Member
 
Join Date: August 25, 2006
Posts: 305
Thumbs up on the Magpul 700 hunter stock. I dropped a sps tactical 6.5 creedmoor into one. I also went with the bottom "metal " and mags. It is a bit heavier than I would want to hump through the woods ,but is excellent off the bench. The magpul magazines work well. No problems with fit in a Timney trigger. And accuracy IS much better than the Remington stock. I did play around with different torques in the action screws and its good to go. Good design.
KROIL is offline  
Old March 16, 2020, 04:28 PM   #4
jmr40
Senior Member
 
Join Date: June 15, 2008
Location: Georgia
Posts: 9,945
What are you going to do with it?

Bell and Carlson and HS Precision use the same construction technique and I can see no advantage either way. B&C is almost always a little less expensive, but HS does offer some options not available from B&C. If B&C makes what you want I see no reason to pay extra for HS-Precision.

For a target/tactical type rifle where you're not concerned about weight Magpul is a decent stock. Just personal preference, but I don't like the styling. If you do, and don't mind the weight it is a good stock. I have some friends with them.

On a hunting rifle, none of the above. All are too heavy for my tastes. B&C does offer what they call a lightweight version, but compared to others it is still overweight.
__________________
"If you're still doing things the same way you were doing them 10 years ago, you're doing it wrong"

Winston Churchill
jmr40 is offline  
Old March 16, 2020, 07:01 PM   #5
old roper
Senior Member
 
Join Date: June 11, 2007
Posts: 1,952
You can get B&C about 2lbs on some models and H&S is pretty close to 3lbs.

Might want to look here

https://www.stockysstocks.com/stocks...ton-700tm.html
__________________
Semper Fi
Vietnam 1965
VFW Life member
NRA Life Member
old roper is offline  
Old March 17, 2020, 01:56 PM   #6
emcon5
Senior Member
 
Join Date: July 10, 1999
Location: High Desert NV
Posts: 2,844
I have a HS stock on my long range rig, and I really like it.



That said, I probably wouldn't buy a HS stock if I was in the market, because I have a long memory.
emcon5 is offline  
Old March 18, 2020, 03:26 AM   #7
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 14,106
Quote:
I have a long memory.
Yes, many of us do remember.

When you say you are going to buy a B&C, just know that B&C has many different stocks offered, make sure you get the right one. I am not a huge fan of B&C due to weight. I prefer fiberglass stocks to molded resin stocks.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old March 18, 2020, 04:59 AM   #8
Spats McGee
Staff
 
Join Date: July 28, 2010
Location: Arkansas
Posts: 8,247
I'm not a long-range shooter. I don't own any of the stocks listed, or even a Remington 700 for that matter. I am, however, going to take just a moment to plug a stockmaker local to me, Choate Machine & Tool. In all candor, I've known the Choates for years, but I'll also tell you that I use their shotgun stocks. And they're some of the nicest people you could hope to meet.
__________________
I'm a lawyer, but I'm not your lawyer. If you need some honest-to-goodness legal advice, go buy some.
Spats McGee is offline  
Old March 26, 2020, 01:37 AM   #9
bill460
Member
 
Join Date: December 13, 2019
Location: Lake Havasu City, Arizona
Posts: 77
I've had a H&S Precision mounted on a Remington 700 .458 Win. Mag. for over 20 years now. It replaced the original Walnut that split at the tang after about 100 rounds. It's been flawless. It dropped right in, and was a perfect fit.
bill460 is offline  
Old March 26, 2020, 11:07 PM   #10
moose fat
Senior Member
 
Join Date: June 20, 2006
Location: Alaska, Yukon R. delta
Posts: 401
I just placed an order this afternoon for an H-S Precision stock for a .270 build I'm doing. I was looking at McMillan stocks too. What sold me on H-S was the price and the ability for a left hand stock with a 12.5 inch length of pull and they are open, no closure due to the virus. I was getting the barreled action ready to send off to Shaw Barrels but they're closed, because of the virus.
moose fat is offline  
Old March 30, 2020, 06:11 AM   #11
JLK
Senior Member
 
Join Date: October 1, 2001
Posts: 133
I purchased a HS precision, Haven’t had a chance to shoot it yet but it fit perfectly.
__________________
Rsrc
JLK is offline  
Old March 31, 2020, 01:01 AM   #12
Eight_is_enough
Senior Member
 
Join Date: June 17, 2013
Posts: 130
My 700 came with a great stock.

Eight_is_enough is offline  
Old April 1, 2020, 04:35 PM   #13
cw308
Senior Member
 
Join Date: September 2, 2010
Location: Plainview , Long Island NY
Posts: 3,717
My benchrest rifle started it's life as Rem.700 LTR in 308 , the stock came with a HS Precision stock . After putting 4000+ rounds through the barrel I had a new match barrel installed , had it completely blue printed and changed the HS Precision LTR stock to the larger HS Precision stock that's on the 700P. I like the stock it's Rock solid. Hope I helped , Be Well stay safe.

Chris
cw308 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06314 seconds with 8 queries