June 18, 2017, 02:06 AM | #1 |
Member
Join Date: January 4, 2016
Location: Iowa
Posts: 31
|
Type 38 project
So i have found a nice type 38 barrel with mum still intact for 60 bucks and been working on finding and piecing back together a original style rifle. I figured i save at least one piece of history for later generations to come.What are some of your guys and gals opinion on doing something like this and once i get done with the project. I will post pics of it to see what everyone thinks of it and yes i understand some people like different guns and styles but i am at that point in the build i having problems finding the little pieces for the rifle but still very interested to complete the build.
IMG_0609_zpsnoen1ozx.jpg IMG_0610_zps3uzuco0k.jpg IMG_0612_zpshzqau3ml.jpg |
June 18, 2017, 02:08 AM | #2 |
Member
Join Date: January 4, 2016
Location: Iowa
Posts: 31
|
Here is another pic of the rifle and the stock i bought for it.
FullSizeRender 61_zpsf3brvtn7.jpg pix298320995.jpg |
June 18, 2017, 08:51 PM | #3 |
Senior Member
Join Date: August 6, 2009
Location: Albuquerque
Posts: 2,832
|
Good luck, good wood is getting hard to come by. I've been chasing a decent uncut stock for a P17 for 3 years now.
__________________
I used to love being able to hit hard at 1000 yards. As I get older I find hitting a mini ram at 200 yards with the 22 oddly more satisfying. |
June 18, 2017, 08:54 PM | #4 |
Senior Member
Join Date: December 27, 2008
Posts: 555
|
Lots of 38s have been parted out over the years, so it will just
take patience to round them up. If the bore is shootable, go for it. Stock shown looks clean without having been sanded down. I'm thinking floorplate assembly, upper tang, tang and stock screws, upper and lower bands, and of course, the bolt. Recommend you find a complete bolt if possible, rather than putting one together from parts. Less chance of issues with the safety. Maybe share a pic of the left receiver markings. Is it a series rifle or a straight Koishikawa? Put a piece of blue tape over a couple of the serial numbers if you feel the need. Good hunting, JT |
June 18, 2017, 09:22 PM | #5 |
Member
Join Date: January 4, 2016
Location: Iowa
Posts: 31
|
I know most good looking wood stock for the type 38 was going for $175+ the one in the pic i payed $117 for stock and hand guard with a few of the metal fixtures still in the stock but it pretty dinged up but its solid and will hold up. Just waiting on that last of my parts to finish this build off. Here is some pics as its coming together just waiting on the cleaning rod, bolt assembly and the rear tang screw.
Type 38 1.jpg Type 38 2.jpg Last edited by Spaz86; June 18, 2017 at 09:35 PM. |
June 18, 2017, 09:42 PM | #6 |
Member
Join Date: January 4, 2016
Location: Iowa
Posts: 31
|
Its a straight Koishikawa. The barrel has at least 85% left on it so it should be a nice shooter for many years to come.
Type 38 3.jpg Type 38 Mum.jpg Last edited by Spaz86; June 19, 2017 at 12:14 AM. |
June 19, 2017, 09:46 PM | #7 |
Senior Member
Join Date: July 3, 2005
Location: Alabama
Posts: 925
|
Starting to come together nicely!
|
June 20, 2017, 12:48 AM | #8 |
Member
Join Date: January 4, 2016
Location: Iowa
Posts: 31
|
It is hopefully be able to shoot this weekend as long as it checks out with a gunsmith. Plus its one more nice example of the past that being restore sure it not matching but hell its just like a field repaired rifle.
|
June 20, 2017, 03:27 PM | #9 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,675
|
Have the barrel slugged while you're at it, so you know what the bore diameter actually is.
Depending on what the bore diameter actually is, you might not be able to easily find jacketed bullets of the proper size. Wide variations in groove diameter have been reported. ALWAYS, ALWAYS wear shooting glasses. The older manuals usually had this warning. Gas blowback, due to undersize bullets (resulting in insufficient pressure for the case to seal the chamber) was known to happen. The round is not particularly powerful, driving a 140gr to around 2300fps and a 160gr to about 2000fps from a 19" carbine barrel, with top end loads. Good Luck with your project!
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
June 20, 2017, 05:05 PM | #10 |
Senior Member
Join Date: June 9, 2010
Location: live in a in a house when i'm not in a tent
Posts: 2,483
|
Nice looking project. Good luck bringing it back.
don't you ever wonder why there are bolt-less actions in the world.....
__________________
I'm right about the metric system 3/4 of the time. |
June 20, 2017, 11:27 PM | #11 |
Member
Join Date: January 4, 2016
Location: Iowa
Posts: 31
|
44 AMP the bore diameter is 264.5 at the muzzle on my hornaday digital caliper.But i did buy some graf and sons 6.5 ammo for it when i picked up the stock.I will have all the parts for the rifle by tormorrow to send it to a gunsmith for head space checks and a final once over before heading to a range. but i do know about the gas blow back cause my type 99 does the same thing but i have cleaned the chamber out well and it stop but there still gas blow back from the gas vent holes on the top.
Last edited by Spaz86; June 21, 2017 at 12:46 AM. |
June 20, 2017, 11:38 PM | #12 |
Member
Join Date: January 4, 2016
Location: Iowa
Posts: 31
|
Doofus i love my bolt action rifle i own 6 of them including a m1 garand which is pure enjoyment at the range cause where i go to shoot everyone is firing ar-15's that are tricked out and i pull my m1 out and hitting the targets they are hitting with there scopes with my iron sights some people dont like that lol.
|
June 21, 2017, 01:28 PM | #13 |
Member
Join Date: January 4, 2016
Location: Iowa
Posts: 31
|
Finally got the last of the parts needed to get it off to my gun smith so well see what happens. couple more pics of it together.
Type 38 4.jpg Type 38 5.jpg |
Thread Tools | Search this Thread |
|
|