|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 6, 2013, 10:53 PM | #1 |
Member
Join Date: December 21, 2011
Location: Cleveland Ohio
Posts: 27
|
Just got a NIB Remington 514 single shot .22lr (youth model)
So I added a scope to my cool little rifle and bore sighted it since I'm having trouble seeing small targets at even just 25 yards, the question remains; once I sight this thing in at 25 and then probably 75 yards, should I basically stick to the same ammo? (cci mini mags most likely as the rifle seems to like them the most) or could I still try different ammo and hope for the best like federal spitfires? Or these stinger rounds.I keep hearing about?
Kinda only just wondering if I should expect drastic differences between a few different brands an types... |
January 6, 2013, 11:58 PM | #2 |
Senior Member
Join Date: March 12, 2011
Location: Washington state
Posts: 1,558
|
It's your gun, do what you want to.
As to different ammo, never know how it will do til you try. Thats half the fun of having a gun. It has been my experience with 22's that most brands shoot to almost the same poa. However the group size can vary drastically.
__________________
You can't fix stupid....however ignorance can be cured through education! |
January 8, 2013, 08:57 AM | #3 |
Senior Member
Join Date: December 14, 2004
Location: Maine
Posts: 3,694
|
I ruined my brother's 514 by shooting shorts in it and eroding the chamber, but I shot a lot of them. The extractor is a weak part of the design and mine failed to extract, after about a gazillion rounds.
|
January 8, 2013, 09:27 PM | #4 |
Senior Member
Join Date: January 6, 2012
Location: Ma, near a brook
Posts: 229
|
Just got a NIB Remington 514 single shot .22lr (youth model)
you should try different brands to see what your rifle likes.I shoot CCI Standard Velocity or Remington Sub-Sonics. have fun. Cliff
|
January 9, 2013, 10:31 AM | #5 |
Member
Join Date: December 21, 2011
Location: Cleveland Ohio
Posts: 27
|
I've heard about problems with the extractor on older models, not sure if they tackled that issue in the newer models. It sure loves those cci mini mags. And I just picked up a box of velocitors. Probably try the stingers too... But I think I'll go with the mini mags as a basis for sighting in te scope since a box of 100 is at a very fair price and it shoots very straight. The guy negus the counter highly recommended Winchester super-x as another high velocity round to try. Gotta say I'm not really a fan of the cci sub sonic quiet 22s but maybe I'll try them again just in case. It feels too much like a bb gun I suppose, but maybe if I get a pistol I'll change my mind about that. Who knows. Thanks for all te input guys. Definitely my Favorite forum sight ever!
|
January 9, 2013, 10:42 AM | #6 |
Senior Member
Join Date: December 14, 2004
Location: Maine
Posts: 3,694
|
I was amazed at the accuracy of my 514, after mounting a 4x scope on it. It needed a side mount, due to the vertical bolt slot. I plinked and shot considerable small game with it, but don't recall grouping ability, since I never shot from a bench 'til later in life.
|
January 9, 2013, 11:06 AM | #7 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,390
|
I have my Father's Remington 521-T, which is in the same basic family.
In the 1980s I tried a WIDE range of ammo for it. As expected some of the high-end (and expensive) target rounds from RWS, Eley, and Winchester performed very well... But a real surprise was PMC Zapper, which turned in groups that were very close to the target ammo, and for about 1/3rd the price. I bought a bunch of bricks of that stuff and shot it for years.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
January 9, 2013, 09:27 PM | #8 |
Member
Join Date: February 29, 2008
Location: Central California, Gilroy specifically
Posts: 37
|
Rem 514
I have a 514 my dad ordered in 1955,1956? 10 years later when I was in high school I shot nickel sized 10 shot groups at 50 yds, with the bead front and U notch rear sight. Young eyes! I used what ever 22 LR ammo was cheapest. This rifle is interesting in that it has walnut stock with dark vertical stripes in the wood. It also has a very tough shiny finish, it came with a miltary type leather sling. I still have the rifle, reminds me of dad.
|
January 12, 2013, 12:41 PM | #9 |
Senior Member
Join Date: May 12, 2011
Posts: 863
|
Make a lot of copies of your own simple targets on plain paper.
Shop the stores as well as online to obtain at least 20 or more different kinds of ammo. Spend some time at the range firing off 5 rounds of each per target and you will come to see which ones group better. Weed out the poorer performers, then do more comparisons going out further in distance. I did this and found a couple particular brands that worked the very best. Then I went back to my favorite online catalog seller and bought a few bricks to use for my shooting season. Keep track of the brands while shooting and make written notes on the targets. Some might appear to be one-hole-wonders while others could be widely scattered. Buying one box of everything you can find can be a bit costly, but I think it is an excercise well worth it. |
January 13, 2013, 09:26 AM | #10 |
Senior Member
Join Date: September 16, 2009
Location: I live in the foot of the Green Mountains of Vermont
Posts: 1,602
|
Clean the chamber
Shooting shorts doesn't erode the chamber . Shorts foul the chamber , and after enough of them , longer shells won't chamber at all . But first comes sticky extraction . Remove the fouling , and it will chamber everything again , with no more sticky extraction !
|
January 15, 2013, 06:12 AM | #11 |
Senior Member
Join Date: December 14, 2004
Location: Maine
Posts: 3,694
|
Sorry, but mine WAS eroded by shorts. I cleaned it very carefully, but the 514s had very soft steel. Extraction was very difficult and finally, impossible with the extractor.
|
Tags |
.22 , 514 , ammo , remington , scope |
|
|