|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
December 18, 2019, 07:37 PM | #1 |
member
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 8,462
|
SIG Offering Army 6.8 Round to the Public - .277 Fury
The Army is currently pursuing a new 6.8 round in experimental testing and there are three different companies chosen for competition for the Next Generation Rifle and Light Machinegun. The Army has required a specific 6.8mm EPR projectile (basically a 6.8mm version of the projectile used in M855A1) and set some classified performance requirements for it.
(Past discussion of Army solicitation and caliber: https://thefiringline.com/forums/sho...d.php?t=602725) SIG is announcing a new bolt-action rifle in a caliber they call “.277 Fury” which uses the same bimetallic case SIG is using in the Army trials. SIG is stating they are getting 3,000fps out of a 16” barrel with a 6.8mm bullet of unspecified weight. http://soldiersystems.net/2019/12/18...-277-sig-fury/ Last edited by Bartholomew Roberts; December 18, 2019 at 07:43 PM. |
December 18, 2019, 08:05 PM | #2 |
Senior Member
Join Date: April 11, 2013
Location: High up in the Rocky Moun
Posts: 665
|
SO!!! It might be ALMOST as good as a 7.62X51 ?????
__________________
The soldier's pack is not so heavy a burden as the prisoner's chains. Dwight Eisenhower It is very important what a man stands for. But it is far more important what a man refuses to stand for. |
December 18, 2019, 08:18 PM | #3 | |
Senior Member
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,424
|
Quote:
Instead of "5.56 sucks" now we're at, "It isn't as good as 7.62x51..."
__________________
Don't even try it. It's even worse than the internet would lead you to believe. |
|
December 18, 2019, 09:21 PM | #4 |
Senior Member
Join Date: November 5, 2016
Location: DFW, TX
Posts: 1,147
|
The 7.62x51 has much more recoil than 5.56, which made it difficult to deliver rounds accurately in automatic fire. I think the 6.8 caliber bullet was a compromise between the two.
|
December 19, 2019, 06:16 AM | #5 |
Senior Member
Join Date: June 15, 2008
Location: Georgia
Posts: 10,809
|
Both the 7.62X51 and the M14 were failed experiments as general purpose military rounds. The 7.62 round has it's place as a designated marksman round or as a short range snipers round. But the 5.56 we have been using for the last 50 years is just fine for most situations.
No cartridge nor platform to fire it from is perfect in every situation, but I'm certain we'd have filled more body bags in the last 50 years if we'd stayed with the 7.62 round. It maybe possible to develop something in 26 or 27 caliber that improves on 5.56 without the negatives of 308. But I have serious doubts. In order to get the muzzle velocity with bullets they want to use you're going to have to very serious negatives. The laws of physics are strictly enforced, there is no way around it #1 That much velocity, with that much bullet weight, from an AR 15 platform is going to generate as much, of not more recoil than you'd get from the much heavier M14/308 combo. Reducing recoil was a big part of the decision to drop the 7.62 round. #2 To get the desired velocity is going to require light for caliber, short stubby bullets. While the MV looks good, that type bullet will lose velocity quickly limiting long range effectiveness. It also means poor penetration, especially on barriers. Those were 2 alleged negatives of the 5.56 round. Unless the military had developed some type of mystery round that defies the laws of physics I don't see any advantage with any of the 6.5 or 6.8 cartridges that can't be solved by 70-77 gr bullets in the 5.56.
__________________
"If you're still doing things the same way you were doing them 10 years ago, you're doing it wrong" Winston Churchill |
December 19, 2019, 01:07 PM | #6 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
"...the 7.62X51 and the M14 were failed experiments..." The latter exists due to the former. Although it might be the other way. Both were American ideas at a time when everybody was working on a smaller calibre cartridge for use in Europe.
The .280 Enfield, for example. Basically a 7mm designed specifically for European battle fields. The U.S., however decided the 7.62x51 would be the NATO cartridge and threatened to leave NATO if it wasn't adopted.
__________________
Spelling and grammar count! |
December 19, 2019, 07:36 PM | #7 |
member
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 8,462
|
We’ve got multiple threads on the military trials. I’d really appreciate people who want to rehash those arguments taking them there.
SIG offering their cutting edge technology to the public before the military trials are even done surprises me. Historically, that’s a move made by companies that lose the military trials. I’ve got to say a 6.2lb rifle with the handling of a 16” barrel and the ballistics of a 24” .270 Win Mag sounds interesting. Seems like it would be a handy mountain rifle. |
December 20, 2019, 09:36 AM | #8 |
Senior Member
Join Date: January 13, 2018
Posts: 1,326
|
Pseudoscience and 100 years in the future!!! There is no way!!! It will never work!!!
|
December 20, 2019, 12:45 PM | #9 | |
Senior Member
Join Date: May 2, 2002
Location: Only1/2WayThere
Posts: 1,316
|
Quote:
Really curious to see what these end up looking like in the wild. SIG has some flat out neat stuff, I'm just skeptical of their general ability to execute on scale. Sent from my SM-A102U using Tapatalk |
|
December 20, 2019, 07:56 PM | #10 |
member
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 8,462
|
Well, you’ve got a good point P-990. You can introduce a fancy bimetallic cartridge that lets you accelerate a .277 bullet to 3,000 fps in a 16” barrel; but how long does that barrel last?
The link in my original post shows an “influencer” shooting the CROSS rifle in .277 Fury and he looks a little surprised at the recoil based on the muzzle jump in that first shot. He has it tamed by the second shot; but I’m guessing that guy is not a dirt clod shooter and he looked a bit shocked at first. |
December 20, 2019, 08:09 PM | #11 | |
Senior Member
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
|
Quote:
__________________
Science and Facts are True whether you believe it or not |
|
December 21, 2019, 10:39 AM | #12 | |
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,249
|
Quote:
6.5 lbs Cross Rifle 31 oz Tango 6 rifle scope 15 oz Sig 762 DT suppressor That puts you right at 9.5 lbs and you can probably add at least another .5 lbs for rings and ammo. As equipped in the article blows your mountain rifle theory out of the water. The Cross rifle is a blatant copy of Q's Fix rifle, but I'm surprised someone didn't copy it sooner. I'm interested in the cartridge because I'm an unabashed .270 Win fan. I'd really like to know what bullet they were shooting, I'd also assume it's running pretty high pressure so I wonder about throat life.
__________________
NRA Life Member |
|
December 21, 2019, 01:09 PM | #13 | |
member
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 8,462
|
More info on the civilian cartridge... 80,000 PSI!
Quote:
|
|
December 21, 2019, 01:23 PM | #14 | |
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,249
|
Quote:
The G1 BC on the 140 grain load lines up perfectly with the Sierra TGK bullet. Sierra 140 grain .277 Tipped Game King
__________________
NRA Life Member |
|
December 21, 2019, 02:10 PM | #15 |
member
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 8,462
|
I’m thinking throat life is pretty poor but that AR style barrel extension will come in handy. Given some of the hiccups SIG has had with introducing new designs, 80k PSI makes me hope they ironed this out thoroughly.
|
December 21, 2019, 03:21 PM | #16 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,543
|
If I am hunting bongo in the Congo, I am not worrying about barrel life, but if I am equipping a sizeable military outfit, it is going to be a logistic and budget problem.
|
December 22, 2019, 04:12 PM | #17 |
member
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 8,462
|
I wonder what Jeff Cooper would think about this rifle/caliber combo since it checks off several of his boxes for the Scout rifle as far as length, weight, power, etc.
|
December 24, 2019, 09:38 AM | #18 |
member
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 8,462
|
New info on the cartridge from Guns America: https://www.gunsamerica.com/digest/2...y-demystified/
The highlights are: 1. SIG plans to offer the ammo in 2020. 2. SIG is also going to offer other calibers, including long-action and a 6.5 that is not a Creedmoor using their bimetallic cases and proprietary powders. 3. The bimetallic cases will be reloadable. 4. SIG states they are “all-in” and will support this in the civilian market whether they win the military contract or not. 5. SIG claims their proprietary powder addresses the barrel life issue all of us are thinking about and while they won’t release numbers yet, it is going to be magical. |
December 24, 2019, 10:10 AM | #19 | |
Senior Member
Join Date: May 2, 2002
Location: Only1/2WayThere
Posts: 1,316
|
Quote:
Now, back to the recoil and blast, I noticed the shooter's reaction in the video link. I also noticed the sample rifle is suppressed, which 99.9% of the rifles that end up in the wild won't be. Given the current trend toward milder, more shooter-friendly cartridges, this looks like a step back into the Magnum race of the '90s and early 2000s. I don't want to hate on it until it's in the hands of the public, but I'm reading SIG as a lot of hype and hyperbole at this moment. Hopefully I'm completely off-base and it's a revolution in small-arms technology. Only time will shake that out. Sent from my SM-A102U using Tapatalk |
|
December 24, 2019, 10:27 AM | #20 | |
member
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 8,462
|
Quote:
|
|
December 24, 2019, 11:19 AM | #21 |
Senior Member
Join Date: July 14, 2002
Location: Nashville, TN
Posts: 2,045
|
That’s gonna be........
Well “Just play anything just play it LOUD!!” LOUD.
__________________
"Is there anyway I can write my local gun store off on my taxes as dependents?" |
December 24, 2019, 12:41 PM | #22 |
member
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 8,462
|
If it is 80,000 psi at the chamber, you probably won’t be able to just slap a .30 cal suppressor rated for .300 Win Mag and call it good either. You are likely looking at a whole new centerfire rifle suppressor to get that LOUD down to tolerable.*
*Unless you have a .338 Lapua or .50 BMG suppressor laying about. Still, a 42-44” overall unfolded package with a suppressor and a 140gr bullet making over 3,000fps. |
December 24, 2019, 01:10 PM | #23 |
Junior member
Join Date: July 26, 2001
Location: midwest
Posts: 2,374
|
Sounds like someone's spent a lot of R&D $$$ trying to 'make the old new again.'
Are we back to the future with an updated .276 Pedersen? |
December 24, 2019, 01:19 PM | #24 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,543
|
No, but we may have reinvented the .280 Halger. Which was the .280 Ross overloaded in Germany. Taylor said you couldn't buy one in England, the factory load was so hot that the Magnum Mauser action would not stand the 130% proof test.
|
December 24, 2019, 07:37 PM | #25 |
Senior Member
Join Date: March 2, 2014
Posts: 11,789
|
Funny--I don't think of any the things you guys have mentioned. When I read 80,000 psi, the first thing that pops into my somewhat questionable mind is what happens when things go sideways (which they will eventually)--and that pressure gets doubled.
__________________
"Everyone speaks gun."--Robert O'Neill I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk! |
|
|