January 16, 2013, 09:48 AM | #1 |
Member
Join Date: February 24, 2009
Posts: 31
|
Reloading slugs
I want to get back into reloading shotgun shells. I want to do slugs. Can I use shot casings or do I need to use only slug casings.
|
January 16, 2013, 10:06 AM | #2 |
Senior Member
Join Date: October 17, 2006
Location: East Texas
Posts: 334
|
Interested in this myself, tagged for further interest .
Sent from my iPhone using Tapatalk |
January 16, 2013, 12:00 PM | #3 |
Senior Member
Join Date: November 30, 2007
Location: Virginia
Posts: 298
|
You can use either. I use Winchester AA or Federal Gold Metal hulls when loading Lee 1oz slugs.
|
January 17, 2013, 07:30 PM | #4 |
Senior Member
Join Date: November 30, 2010
Location: Ohio
Posts: 171
|
I`m definately not a Lee fan, but I have a friend that is casting slugs with the new Lee slug and is haveing real good luck with them. He is loading AA hulls and the AA wads.
|
January 17, 2013, 10:51 PM | #5 |
Senior Member
Join Date: October 2, 2007
Posts: 641
|
tr, 1/18/13
I've spent the past two years experimenting with different 12 gauge slug loads and finally found what works for my pig hunting at ranges of less than 100 yards in heavy brush. First step is to take a look at the www.castboolits.gunloads.com shotgun loading subforum and also over at www.shotgunworld.com in the slugshooters subforum. Both are very helpful. Next, for supplies look at www.ballisticproducts.com they have almost everything you'll need to load slugs. I've tried the Lyman 525 grain slug, the BPI shuttlecock slug, the Foster's slug and the Gualandi fullbore slug with attached wad. All were in a smoothbore barrel. I've tried multiple hulls, wad and shot card combinations and even filling the rear cavity of some of the slugs with epoxy resin but only got good results (sub-3" 50 yard groups) with the Gualandi slug. Since these come from Italy I didn't want to depend on a supplier half a world away from my location. The final best answer was to order a slug mold from Tom at www.accuratemolds.com. I got the 770 grain slug mold and figured out a magic load with Blue Dot (thanks to the CB and SGW forum members) that groups well and goes in one side of a wild pig and out the other leaving a 0.730" hole. I changed out the barrel to a rifled one after getting frustrated with the smoothbore. Take a look at the above sites (which also have info on the Lee slug), and see if it helps you. Good luck. best wishes- oldandslow |
January 18, 2013, 12:05 AM | #6 |
Senior Member
Join Date: January 2, 2012
Location: Minnesota
Posts: 3,876
|
Might want to visit Ballistic Products web site for a looks see. Afterwards. You just may want to try roll crimping your slugs.
|
January 18, 2013, 08:35 AM | #7 |
Senior Member
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
|
I believe in keeping it simple. About the only thing I use shotguns for now days is 3 gun. I use an old Remington 870 Police Riot gun with an 18 inch smooth barrel.
In three gun, you don't shoot that far, you are required to shoot bird shot, slugs and buck shoot. Like I said, I keep it simple, I use WW AA Hulls, AA wads, and a Mec 1 oz charge bar. I load 1 oz of 8 shot, and Lee's 1 oz slug, and I use a Lee round ball mold that makes .319 balls at 48 grns, which I stick 9 into the same AA hulls and wads. Recoil is the same across the board, the buck shot and bird shot pattern plenty good enough for the distance we shoot, and I have no problem hitting an 8 inch circle with my slug loads at 50 yards (again, within the distances we shoot). The only modification I do to the above loads is I use a magic marker to mark which shell is buck shot or slugs. I have other charge bars for my Mec 600 If I decide to go bird hunting, but there aren't many birds around here. Or I have the set up for trap and skeet loading if I decide to get back into those games. You really don't have to get all fancy with slug loading. Some people deer hunt with shot guns, If I was to do that I have faith in my slugs, but I'd probably put a bit more powder behind my buck shot loads.
__________________
Kraig Stuart CPT USAR Ret USAMU Sniper School Distinguished Rifle Badge 1071 |
January 18, 2013, 09:33 PM | #8 |
Senior Member
Join Date: March 31, 2010
Location: Communist State of IL.
Posts: 1,562
|
kraigwy, what powder and charge are you using?
__________________
NRA Life Member, SAF Member |
January 19, 2013, 12:35 AM | #9 |
Senior Member
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
|
I use the Mec #31 powder bushing throwing 18.5 grs. of Red Dot
__________________
Kraig Stuart CPT USAR Ret USAMU Sniper School Distinguished Rifle Badge 1071 |
January 14, 2018, 12:25 AM | #10 |
Senior Member
Join Date: June 17, 2010
Location: Virginia
Posts: 6,896
|
Well, I posted a string of a serious series of experimental slug loads -- including
a text intro that the string was 5 years old. When I hit 'submit', it dumped me to a warning page, and told me to return to the previous page and hit the warning/acknowledgement "checkbox"of an old string... ..... and erased the post. So..... a bottom-line/single pic is what's left of my after-midnite energy: |
January 14, 2018, 01:37 PM | #11 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
OP is 4 years old.
__________________
Spelling and grammar count! |
January 14, 2018, 02:06 PM | #12 | |
Senior Member
Join Date: June 17, 2010
Location: Virginia
Posts: 6,896
|
Quote:
|
|
January 14, 2018, 06:48 PM | #13 |
Senior Member
Join Date: January 27, 2001
Posts: 298
|
Mehavey,. If you feel like posting your experiments and data, I'm sure lots of us would love to see it!
|
January 14, 2018, 09:05 PM | #14 |
Senior Member
Join Date: January 28, 2006
Posts: 1,482
|
You've definitely got my attention! Although since leaving OK where I was slug hunting on Ft Sill and IL where it was slug-only for deer, I have not used my shotguns for deer. It got old paying $12-15 for a box of 5 sabot slugs!
Ive thought of returning to Ft Sill for their special hog season in Mar-Apr timeframe and would love to turn my Mec Sizemaster and some of my AA bulls into cheaper, accurate sabot rounds!
__________________
NRA Life Member "We have enough gun control. What we need is idiot control." |
January 15, 2018, 12:11 AM | #15 |
Senior Member
Join Date: June 17, 2010
Location: Virginia
Posts: 6,896
|
This is the other combo of various hulls/powders/wadcups that worked (dramatically) well.
Four Notes: - Blue Dot again - Cheap Rio Hulls (any Cabelas) starcrimped, Claybuster/Fed 12S3 equivalent cup that seals straightwall shells - Much easier on shoulder at 1,225 (vice the AA 1,480 load) - (Surprisingly) Same POI at 50 yds |
January 15, 2018, 10:42 PM | #16 |
Senior Member
Join Date: September 12, 2015
Location: Issaquah WA. Its a dry rain.
Posts: 1,774
|
Old post or not that info is greatly appreciated mehavey. Fantasic results. Now I just need you to work up that good of a load with .690 pumkin balls for me!
__________________
Just shoot the damn thing. |
January 16, 2018, 10:42 AM | #17 |
Senior Member
Join Date: January 9, 2018
Posts: 539
|
Timely post! I agree with Globemaster3, slugs ain't cheap and reloading them is. Indiana was slug only/deer as a kid, then they allowed some pistol around 15-20 years ago, now many high powered rifles are allowed (finally get to use my .444).
Casting and reloading my own slugs seems like a very interesting and fun prospect. I appreciate all the input here. I personally use an 1100 smoothbore slug barrel. Just never dropped the $ for a rifled barrel after I made a lung shot on a 9 pointer that dressed to 213 lbs - off hand at 120 yds, open sights. Maybe dumb luck but I'm still proud of that one! |
January 16, 2018, 11:30 AM | #18 |
Senior Member
Join Date: January 26, 2016
Location: NE Atlanta
Posts: 337
|
Mehavey, your slug load is almost identical to what my dad loaded back in the 70's. He had a sabot carrier that had spiral ridges that supposedly simulated refiling for the smooth bore shotguns. He cast his slugs and were just over 500 gr. and used Blue Dot.
|
January 17, 2018, 09:43 AM | #19 |
Junior member
Join Date: February 27, 2015
Posts: 1,768
|
The thread might be 4 years old, but I learned something I'm just getting around to...
|
January 17, 2018, 11:49 AM | #20 |
Senior Member
Join Date: July 1, 2001
Posts: 6,333
|
Are you guys shooting these in rifled barrels?
I used the Lyman slug + AA 3” hulls....need to check my notes on the wad and powder. The key is finding a load....when I was doing it, I had a hard time finding waa12 wads. Also, a powder measure or dispenser was a must as Lee didn’t have a bushing for the high charge weight! |
|
|