The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Thread Tools Search this Thread
Old April 18, 1999, 09:43 AM   #1
New 2 H&K's
Junior Member
Join Date: February 16, 1999
Posts: 11
Do you have any detailed instructions on how to break down the Bolt/Carrier on these models ?
New 2 H&K's is offline  
Old April 18, 1999, 12:33 PM   #2
4V50 Gary
Join Date: November 2, 1998
Location: Colorado
Posts: 20,773
Lemme see if I can do it from (fading) memory:

Place the bolt and carrier assembly on the table with the back of the bolt carrier on the table and the bolt head pointed skywards. The bolt head should be on the left and the guide tube of the carrier to the right.

Making sure the rollers aren't in the locked mode, grab the bolt head and twist it 90 degrees counterclockwise. Now, pull the bolt head straight up and it should separate from the bolt carrier.

Rotate the locking piece 180 degrees such that it's locking lug disengages from the locking lug recess of the bolt carrier. The locking piece should be lifted straight up. The firing pin and firing pin springs should come out now and you're finished with the field strip.

Reassembly is in reverse. Note, when you push the bolt head all the way down, the rollers should pop out into the locked mode. No biggie, this is normal. Simply pull the bolt head just far enough for the rollers to unlock. Now, rotate the bolt head 90 degrees CW and you're ready to drop the assembled bolt/bolt carrier back into the receiver.
4V50 Gary is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 11:04 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2020 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.03842 seconds with 8 queries