Gunslick

spclPatrolGroup · October 15, 2010, 09:44 AM

Can anyone comment on these products, I have been thinking about giving the foaming cleaner a try. In a add I saw at the store they showed a old tank barrel that they cleaned before and after, if its true it did an amazing job. The fact that they say you dont need to use brushes, just spray in, wait an hour, and run a few patches through has my interest peaked, I have never used a foaming cleaner before.

pistolaccents · October 16, 2010, 07:42 PM

I sell alot of it.. But I havent used it myself yet... I did order some for myself...
http://www.pistolaccents.com/Gun-Sli...cts_c_129.html

I did try "gun juice" I applied it as per the specs I did notice some tighter grouping...

OleEd · October 18, 2010, 10:38 AM

It does the job as stated. I shoot a lot of lead bullets so I add an extra scrub of break free to insure the grooves are clear. For a casual shooter I don't think you would need to do that. Just clean other parts while waiting for 15 min then clean and oil.

4jfarmer · October 19, 2010, 10:13 PM

ive used it on some well used muzzleloaders and have wonderful luck using it! I havent used it on any modern fire arms though.

October 15, 2010, 09:44 AM	#1
spclPatrolGroup Senior Member Join Date: August 19, 2010 Location: North Dakota Posts: 349	Gunslick Can anyone comment on these products, I have been thinking about giving the foaming cleaner a try. In a add I saw at the store they showed a old tank barrel that they cleaned before and after, if its true it did an amazing job. The fact that they say you dont need to use brushes, just spray in, wait an hour, and run a few patches through has my interest peaked, I have never used a foaming cleaner before.

October 16, 2010, 07:42 PM	#2
pistolaccents Member Join Date: April 21, 2010 Location: New York Posts: 23	I sell alot of it.. But I havent used it myself yet... I did order some for myself... http://www.pistolaccents.com/Gun-Sli...cts_c_129.html I did try "gun juice" I applied it as per the specs I did notice some tighter grouping... __________________ Visit www.pistolaccents.com for all your shooting needs

October 18, 2010, 10:38 AM	#3
OleEd Member Join Date: December 8, 2009 Location: Mo Posts: 44	I use the foam and like it It does the job as stated. I shoot a lot of lead bullets so I add an extra scrub of break free to insure the grooves are clear. For a casual shooter I don't think you would need to do that. Just clean other parts while waiting for 15 min then clean and oil.

October 19, 2010, 10:13 PM	#4
4jfarmer Junior Member Join Date: September 6, 2010 Location: mtn view ar Posts: 10	ive used it on some well used muzzleloaders and have wonderful luck using it! I havent used it on any modern fire arms though.